Re: pktcdvd DVD+RW always writes at max drive speed (not media speed)

[linuxer]

Peter Osterlund <petero2@xxxxxxxxx> writes:
  > 
  > linuxer@xxxxxxxxxxxx writes:
  > 
  > > In drivers/block/pktcdvd.c it appears that in the case of DVD
  > > rewriting, pkt_open_write always sets the write speed to pkt_get_max_speed
  > > (the maximum writing speed reported by the drive). 
  > > 
  > > In my case, I have a new drive capable of 8x re-writing. However, all of
  > > my existing media is rated for only 4x rewrite speed. 
  > > 
  > > When attempting to rw mount these disks, pktcdvd reports:
  > > 
  > > Feb 18 00:09:52 ever kernel: pktcdvd: write speed 11080kB/s
  > > Feb 18 00:09:54 ever kernel: pktcdvd: 54 01 00 00 00 00 00 00 00 00 00 00 -
  > > sense 00.54.9c (No sense)
  > > Feb 18 00:09:54 ever kernel: pktcdvd: pktcdvd0 Optimum Power Calibration failed
  > > 
  > > And then of course a huge heap of I/O errors on the disk. 
  > 
  > Have you verified that this is caused by the speed setting, ie does it
  > work correctly if you hack the driver to write at 4x speed?
  > 

Correct. Adding a hard-coded manual setting of write_speed = 5540 to
pkt_open_write results in functional operation (at least with 4x rated
DVD+RW media).

Obviously, this particular drive is perfectly happy to try to write at over
the rated media speed if it is asked to. I can't fault the manufacturer for
this, for I generally like the idea of letting the user decide instead of
imposing hardware/firmware fixed limits. 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/