[patch 29/39] [PATCH] skge: speed setting

[Chris Wright]

-stable review patch.  If anyone has any objections, please let us know.
------------------

This is a clone of John Linville's fixed for speed setting on sky2 driver.
The skge driver has the same code (and bug). It would not allow manually forcing
100 and 10 mbit.

Signed-off-by: Stephen Hemminger <shemminger@xxxxxxxx>
Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
---

 drivers/net/skge.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletion(-)

--- linux-2.6.15.4.orig/drivers/net/skge.c
+++ linux-2.6.15.4/drivers/net/skge.c
@@ -1698,6 +1698,7 @@ static void yukon_mac_init(struct skge_h
 	skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
 	skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_CLR);
 	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR);
+
 	if (skge->autoneg == AUTONEG_DISABLE) {
 		reg = GM_GPCR_AU_ALL_DIS;
 		gma_write16(hw, port, GM_GP_CTRL,
@@ -1705,16 +1706,23 @@ static void yukon_mac_init(struct skge_h
 
 		switch (skge->speed) {
 		case SPEED_1000:
+			reg &= ~GM_GPCR_SPEED_100;
 			reg |= GM_GPCR_SPEED_1000;
-			/* fallthru */
+			break;
 		case SPEED_100:
+			reg &= ~GM_GPCR_SPEED_1000;
 			reg |= GM_GPCR_SPEED_100;
+			break;
+		case SPEED_10:
+			reg &= ~(GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100);
+			break;
 		}
 
 		if (skge->duplex == DUPLEX_FULL)
 			reg |= GM_GPCR_DUP_FULL;
 	} else
 		reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
+
 	switch (skge->flow_control) {
 	case FLOW_MODE_NONE:
 		skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/