Re: Re:Re: problems with scsi_transport_fc and qla2xxx

From: Andrew Vasquez
Date: Thu Mar 02 2006 - 12:36:41 EST


On Thu, 02 Mar 2006, Maxim Kozover wrote:

> Today I tested disconnecting QLogic port.
> Adapter 4 is connected via switch to a storage and 3 LUNs are seen via
> the adapter.
> Only 1 rport is created (for FCP Target) while in Emulex case there
> were 3: (Fabric Port, Directory Server and FCP Target, FCP Initiator).

That's correct, we currently don't make an upcall for the SNS server
port nor the switch fabric port.

> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> FCP Target
>
> Default dev_loss_tmo is 6 (1+5) while in Emulex case the default was 35.
>
> After disconnecting the cable between the HBA and the switch
> qla2xxx 0000:03:01.0: LOOP DOWN detected (2).
> rport-4:0-0: blocked FC remote port time out: removing target and saving binding
>
> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> unknown
>
> Relevant scsi devices are removed from /proc/scsi/scsi.
>
> After reconnecting the cable
> qla2xxx 0000:03:01.0: LIP reset occured (f7f7).
> qla2xxx 0000:03:01.0: LOOP UP detected (2 Gbps).
>
> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> FCP Target
>
> However, scsi devices don't reappear in /proc/scsi/scsi.
> When I issue rescan, the command is stuck
> echo - - - > /sys/class/scsi_host/host4/scan
>
> Please advise.

Could you add the enable-debug patch I sent you earlier and retry the
test? Again forward the relevent snippets from var/log/messages.

Here's the patch again.

--
av

---

diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 935a59a..632f653 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -9,6 +9,7 @@
*/
/* #define QL_DEBUG_LEVEL_1 */ /* Output register accesses to COM1 */
/* #define QL_DEBUG_LEVEL_2 */ /* Output error msgs to COM1 */
+#define QL_DEBUG_LEVEL_2 /* Output error msgs to COM1 */
/* #define QL_DEBUG_LEVEL_3 */ /* Output function trace msgs to COM1 */
/* #define QL_DEBUG_LEVEL_4 */ /* Output NVRAM trace msgs to COM1 */
/* #define QL_DEBUG_LEVEL_5 */ /* Output ring trace msgs to COM1 */
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index 363205c..b2e22b0 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -8,7 +8,7 @@
* Compile time Options:
* 0 - Disable and 1 - Enable
*/
-#define DEBUG_QLA2100 0 /* For Debug of qla2x00 */
+#define DEBUG_QLA2100 1 /* For Debug of qla2x00 */

#define USE_ABORT_TGT 1 /* Use Abort Target mbx cmd */



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/