Re: Genius VideoWonder DVB-T PCI support

[Mauro Carvalho Chehab]

David,

It is better to address such questions to v4l ml or to dvb ml. Is it
possible to make it work with your help.

Cheers,
Mauro.

Em Sáb, 2006-03-04 às 09:31 +0100, David Kredba escreveu:
> Hello.
> 
> I got PCI card Genius VideoWonder DVB-T and I am trying to get it to work.
> 
> The card is using SAA7134H, TDA 10046HT and TDA 8274 chips.
> 
> My system is Gentoo (Base System version 1.6.14), kernel 2.6.15.
> 
> The card is, by lspci, visible as :
> 
> 02:03.0 Multimedia controller: Philips Semiconductors SAA7134 Video 
> Broadcast Decoder (rev 01)
>          Subsystem: KYE Systems Corporation Unknown device 0301
>          Flags: bus master, medium devsel, latency 32, IRQ 19
>          Memory at ffdffc00 (32-bit, non-prefetchable) [size=1K]
>          Capabilities: [40] Power Management version 1
> 
> If I tried to load saa7134-dvb module it loads and loads all of the 
> other needed modules, but it ignores the card and the module saa7134
> reports the card as V4L2 device and not the DVB.
> 
> There is /usr/lib/hotplug/firmware dvb-fe-tda10046.fw firmware.
> 
> The state before saa7134-dvb loaded :
> 
> Module                  Size  Used by
> w83627hf               24080  0
> hwmon_vid               2432  1 w83627hf
> i2c_isa                 3840  1 w83627hf
> snd_seq_midi            7072  0
> snd_emu10k1_synth       7040  0
> snd_emux_synth         35456  1 snd_emu10k1_synth
> snd_seq_virmidi         6272  1 snd_emux_synth
> snd_seq_midi_emul       7040  1 snd_emux_synth
> snd_pcm_oss            48800  0
> snd_mixer_oss          17280  1 snd_pcm_oss
> snd_seq_oss            33152  0
> snd_seq_midi_event      6144  3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
> snd_seq                50448  8 
> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
> hci_usb                14100  5
> emu10k1_gp              3072  0
> snd_emu10k1           116388  2 snd_emu10k1_synth
> snd_rawmidi            20896  3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
> snd_seq_device          7308  7 
> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec         91040  1 snd_emu10k1
> snd_pcm                80772  3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
> snd_timer              21636  3 snd_seq,snd_emu10k1,snd_pcm
> snd_ac97_bus            2176  1 snd_ac97_codec
> snd_page_alloc          8584  2 snd_emu10k1,snd_pcm
> snd_util_mem            3584  2 snd_emux_synth,snd_emu10k1
> snd_hwdep               7456  2 snd_emux_synth,snd_emu10k1
> snd                    48356  15 
> snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
> soundcore               8032  1 snd
> video_buf              17284  0
> ir_kbd_i2c              6924  0
> ir_common               8324  1 ir_kbd_i2c
> videodev                7680  0
> i2c_i801                8076  0
> i2c_core               17536  4 w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801
> intel_agp              20380  1
> agpgart                28880  1 intel_agp
> r8169                  23816  0
> 
> 
> The state after the saa7134-dvb loaded :
> 
> saa7134_dvb            10500  0
> mt352                   6276  1 saa7134_dvb
> saa7134               108896  1 saa7134_dvb
> v4l2_common             4992  1 saa7134
> v4l1_compat            13700  1 saa7134
> video_buf_dvb           4868  1 saa7134_dvb
> dvb_core               76584  1 video_buf_dvb
> nxt200x                14724  1 saa7134_dvb
> dvb_pll                 9092  2 saa7134_dvb,nxt200x
> tda1004x               15108  1 saa7134_dvb
> firmware_class          8320  3 saa7134_dvb,nxt200x,tda1004x
> w83627hf               24080  0
> hwmon_vid               2432  1 w83627hf
> i2c_isa                 3840  1 w83627hf
> snd_seq_midi            7072  0
> snd_emu10k1_synth       7040  0
> snd_emux_synth         35456  1 snd_emu10k1_synth
> snd_seq_virmidi         6272  1 snd_emux_synth
> snd_seq_midi_emul       7040  1 snd_emux_synth
> snd_pcm_oss            48800  0
> snd_mixer_oss          17280  1 snd_pcm_oss
> snd_seq_oss            33152  0
> snd_seq_midi_event      6144  3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
> snd_seq                50448  8 
> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
> hci_usb                14100  5
> emu10k1_gp              3072  0
> snd_emu10k1           116388  2 snd_emu10k1_synth
> snd_rawmidi            20896  3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
> snd_seq_device          7308  7 
> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
> snd_ac97_codec         91040  1 snd_emu10k1
> snd_pcm                80772  3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
> snd_timer              21636  3 snd_seq,snd_emu10k1,snd_pcm
> snd_ac97_bus            2176  1 snd_ac97_codec
> snd_page_alloc          8584  2 snd_emu10k1,snd_pcm
> snd_util_mem            3584  2 snd_emux_synth,snd_emu10k1
> snd_hwdep               7456  2 snd_emux_synth,snd_emu10k1
> snd                    48356  15 
> snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
> soundcore               8032  1 snd
> video_buf              17284  3 saa7134_dvb,saa7134,video_buf_dvb
> ir_kbd_i2c              6924  1 saa7134
> ir_common               8324  2 saa7134,ir_kbd_i2c
> videodev                7680  1 saa7134
> i2c_i801                8076  0
> i2c_core               17536  9 
> saa7134_dvb,mt352,saa7134,nxt200x,tda1004x,w83627hf,i2c_isa,ir_kbd_i2c,i2c_i801
> intel_agp              20380  1
> agpgart                28880  1 intel_agp
> r8169                  23816  0
> 
> There is this and only this message, coming from saa7134, in teh 
> /var/log/messages file :
> 
> saa7130/34: v4l2 driver version 0.2.14 loaded
> ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
> saa7134[0]: found at 0000:02:03.0, rev: 1, irq: 19, latency: 32, mmio: 
> 0xffdffc00
> saa7134[0]: subsystem: 1489:0301, board: UNKNOWN/GENERIC 
> [card=0,autodetected]
> saa7134[0]: board init: gpio is 10000
> saa7134[0]: i2c eeprom 00: 89 14 01 03 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 20: 01 40 01 02 03 ff 01 03 08 ff 01 ec ff ff ff ff
> saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 40: ff 1b 00 c0 ff 10 ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> saa7134[0]: registered device video0 [v4l2]
> saa7134[0]: registered device vbi0
> 
> There is no support for that card at linuxtv.org site.
> 
> Is there possibility to get the card working?
> 
> Thank you very much, David Kredba
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
Cheers, 
Mauro.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/