Re: [2.6.16.11] Xircom RealPort RBEM56G-100 link change issue

[Grant Coady]

On Wed, 26 Apr 2006 23:46:27 +0200 (CEST), Karel Gardas <kgardas@xxxxxxxxxxxxxxxxxx> wrote:

>
>Hello,
>
>I'm trying to get working linux with Xircom RealPort CardBus Ethernet 
>10/100+Modem 56 PCMCIA card. I only need ethernet working. The problem 
>with this is that I'm losing too many packets while syslog is filled with 
>messages like:
>
>Apr 26 23:17:31 thinkpad kernel: pccard: CardBus card inserted into slot 1
>Apr 26 23:18:13 thinkpad kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
>Apr 26 23:18:13 thinkpad kernel: PCI: Setting latency timer of device 0000:06:00.0 to 64
>Apr 26 23:18:13 thinkpad kernel: eth1: Xircom cardbus revision 3 at irq 11
>Apr 26 23:19:31 thinkpad kernel: xircom cardbus adaptor found, registering as eth1, using irq 11
>Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link status has changed
>Apr 26 23:19:52 thinkpad kernel: xircom_cb: Link is 100 mbit

I use same driver with Xircom RBE-100, no problems, .config + dmesg on 
  http://bugsplatter.mine.nu/test/boxen/tosh/

The xircom_cb driver on 2.6.16.11 is okay here.

Grant.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/