Re: sata_sil24 resetting controller...

[Tejun Heo]

jason wrote:
> Jan Dittmer wrote
>
>
> > I shifted the sata card into a 66MHz, 32bit PCI slot now and the
> > problems went away. Just for the record, this is an Asus PU-DLS
> > mainboard with E7501 chipset. Now I can dd from all devices without
> > any error messages, giving me about 360mb/s continuous throughput for
> > 6 devices which isn't that bad I suppose.
> > The card gets assigned irq 22 in both configurations but in the
> > latter the irq is shared with the on-board usb-uhci controller
> > which somehow seems to work better...
>
> push a 64bit+ 133Mhz+ non bridge PCI-X device into a 32bit slot? Is it 
> right?
> I am confused...

Well, it's not optimal, but most PCI-X cards including sil3124 are 
backward compatible with PCI, so....

--
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/