[PATCH] SGI IOC4: Detect IO card variant

From: Brent Casavant
Date: Wed May 03 2006 - 18:23:59 EST


There are three different IO cards which an SGI IOC4 controller may find
itself on. One of these variants does not bring out the IDE and serial
signals, so we need to disable attaching the corresponding IOC4 subdrivers
to such cards.

Signed-off-by: Brent Casavant <bcasavan@xxxxxxx>

---

drivers/ide/pci/sgiioc4.c | 10 +++++++
drivers/serial/ioc4_serial.c | 13 +++++++++
drivers/sn/ioc4.c | 61 +++++++++++++++++++++++++++++++++++++++++++ include/linux/ioc4.h | 5 +++
4 files changed, 89 insertions(+)

---

diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 43b96e2..e0ba8b5 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -717,6 +717,16 @@ static ide_pci_device_t sgiioc4_chipsets
int
ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
+ /* IO9-RT does not bring out IDE connection.
+ * Do not attach to this particular IOC4.
+ */
+ if (idd->idd_variant == IOC4_VARIANT_IO9_RT) {
+ printk(KERN_INFO
+ "sgiioc4: Not needed for IO9-RT card at %s.\n",
+ pci_name(idd->idd_pdev));
+ return 0;
+ }
+
return pci_init_sgiioc4(idd->idd_pdev,
&sgiioc4_chipsets[idd->idd_pci_id->driver_data]);
}
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index c620209..d53df57 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -2646,7 +2646,10 @@ static int ioc4_serial_remove_one(struct
struct ioc4_port *port;
struct ioc4_soft *soft;

+ /* If serial driver did not attach, don't try to detach */
control = idd->idd_serial_data;
+ if (!control)
+ return 0;

for (port_num = 0; port_num < IOC4_NUM_SERIAL_PORTS; port_num++) {
for (port_type = UART_PORT_MIN;
@@ -2778,6 +2781,16 @@ ioc4_serial_attach_one(struct ioc4_drive
DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev,
idd->idd_pci_id));

+ /* IO9-RT does not bring out serial connections.
+ * Do not attach to this particular IOC4.
+ */
+ if (idd->idd_variant == IOC4_VARIANT_IO9_RT) {
+ printk(KERN_INFO
+ "ioc4_serial: Not needed for IO9-RT card at %s.\n",
+ pci_name(idd->idd_pdev));
+ return 0;
+ }
+
/* request serial registers */
tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;

diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index 67140a5..d21980f 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -222,6 +222,60 @@ ioc4_clock_calibrate(struct ioc4_driver_
idd->count_period = period;
}

+/* There are three variants of IOC4 cards: IO9, IO10, and IO9-RT.
+ * Each brings out different combinations of IOC4 signals, thus.
+ * the IOC4 subdrivers need to know to which we're attached.
+ *
+ * We look for the presence of a SCSI (IO9) or SATA (IO10) controller
+ * on the same PCI bus at slot number 3 to differentiate IO9 from IO10.
+ * If neither is present, it's an IO9-RT.
+ */
+#ifndef PCI_DEVICE_ID_QLOGIC_ISP12160
+#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216
+#endif
+#ifndef PCI_VENDOR_ID_VITESSE
+#define PCI_VENDOR_ID_VITESSE 0x1725
+#endif
+#ifndef PCI_DEVICE_ID_VITESSE_7174
+#define PCI_DEVICE_ID_VITESSE_7174 0x7174
+#endif
+static unsigned int
+ioc4_variant(struct ioc4_driver_data *idd)
+{
+ struct pci_dev *pdev = NULL;
+ int found = 0;
+
+ /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */
+ do {
+ pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC,
+ PCI_DEVICE_ID_QLOGIC_ISP12160, pdev);
+ if (pdev &&
+ idd->idd_pdev->bus->number == pdev->bus->number &&
+ 3 == PCI_SLOT(pdev->devfn))
+ found = 1;
+ pci_dev_put(pdev);
+ } while (pdev && !found);
+ if (NULL != pdev)
+ return IOC4_VARIANT_IO9;
+
+ /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */
+ pdev = NULL;
+ do {
+ pdev = pci_get_device(PCI_VENDOR_ID_VITESSE,
+ PCI_DEVICE_ID_VITESSE_7174, pdev);
+ if (pdev &&
+ idd->idd_pdev->bus->number == pdev->bus->number &&
+ 3 == PCI_SLOT(pdev->devfn))
+ found = 1;
+ pci_dev_put(pdev);
+ } while (pdev && !found);
+ if (NULL != pdev)
+ return IOC4_VARIANT_IO10;
+
+ /* IO9-RT: No SCSI/SATA controller will be present */
+ return IOC4_VARIANT_IO9_RT;
+}
+
/* Adds a new instance of an IOC4 card */
static int
ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
@@ -286,6 +340,13 @@ ioc4_probe(struct pci_dev *pdev, const s

/* Failsafe portion of per-IOC4 initialization */

+ /* Detect card variant */
+ idd->idd_variant = ioc4_variant(idd);
+ printk(KERN_INFO "IOC4 at %s resides on %s card.\n", pci_name(pdev),
+ idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" :
+ idd->idd_variant == IOC4_VARIANT_IO9_RT ? "IO9-RT" :
+ idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown");
+
/* Initialize IOC4 */
pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd);
pci_write_config_dword(idd->idd_pdev, PCI_COMMAND,
diff --git a/include/linux/ioc4.h b/include/linux/ioc4.h
index 3dd18b7..1a9c074 100644
--- a/include/linux/ioc4.h
+++ b/include/linux/ioc4.h
@@ -147,6 +147,10 @@ struct ioc4_misc_regs {
#define IOC4_GPCR_EDGE_6 0x40
#define IOC4_GPCR_EDGE_7 0x80

+#define IOC4_VARIANT_IO9 0x0900
+#define IOC4_VARIANT_IO9_RT 0x0901
+#define IOC4_VARIANT_IO10 0x1000
+
/* One of these per IOC4 */
struct ioc4_driver_data {
struct list_head idd_list;
@@ -156,6 +160,7 @@ struct ioc4_driver_data {
struct __iomem ioc4_misc_regs *idd_misc_regs;
unsigned long count_period;
void *idd_serial_data;
+ unsigned int idd_variant;
};

/* One per submodule */


--
Brent Casavant All music is folk music. I ain't
bcasavan@xxxxxxx never heard a horse sing a song.
Silicon Graphics, Inc. -- Louis Armstrong
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/