Re: events/0 eats 100% cpu on core duo laptop

From: Dimitris Zilaskos
Date: Wed May 17 2006 - 03:11:24 EST

Next message: Jim Cromie: "Re: 2.6.17-rc4-mm1 nfsroot build err, looks related to klibc"
Previous message: David S. Miller: "Re: [PATCH] fix mem-leak in netfilter"
In reply to: Stephen Hemminger: "Re: events/0 eats 100% cpu on core duo laptop"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I have just installed 2.6.17-rc4 and the problems I mentioned have vanished. However I am now flooded with messages during boot:

Linux version 2.6.17-rc4 (root@mitsos) (Ýęäďóç gcc 3.3.6) #1 SMP PREEMPT Wed May 17 09:49:38 EEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f660000 (usable)
BIOS-e820: 000000001f660000 - 000000001f66b000 (ACPI data)
BIOS-e820: 000000001f66b000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
On node 0 totalpages: 128608
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 124512 pages, LIFO batch:31
DMI 2.4 present.
ACPI: RSDP (v000 FUJ ) @ 0x000f5b90
ACPI: RSDT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f6632ac
ACPI: FADT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af8c
ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x1f669e42
ACPI: MCFG (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66a0a7
ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66a0e3
ACPI: SSDT (v001 FUJ FJNB1AF 0x01100000 INTL 0x20050624) @ 0x1f66ac93
ACPI: MADT (v001 FUJ FJNB1AF 0x01100000 LTP 0x00000000) @ 0x1f66aec4
ACPI: HPET (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af2c
ACPI: BOOT (v001 FUJ FJNB1AF 0x01100000 FUJ 0x00000100) @ 0x1f66af64
ACPI: DSDT (v001 FUJ FJNB1AF 0x01100000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:d8000000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=805
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1663.504 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 504572k/514432k available (3167k kernel code, 9364k reserved, 1187k data, 216k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3328.95 BogoMIPS (lpj=1664476)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 20k freed
CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3324.58 BogoMIPS (lpj=1662294)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
Total of 2 processors activated (6653.54 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=1000
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area is not E820-reserved
PCI: Not using MMCONFIG.
PCI: BIOS BUG #81[000fdc70] found
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #09 (-#0c) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
PCI: Bus #0d (-#10) is hidden behind transparent bridge #08 (-#09) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
PCI: Cannot allocate resource region 0 of device 0000:05:00.0
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: f0000000-f00fffff
PREFETCH window: 34000000-340fffff
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
IO window: disabled.
MEM window: 34100000-341fffff
PREFETCH window: disabled.
PCI: Bus 9, cardbus bridge: 0000:08:03.0
IO window: 00003000-000030ff
IO window: 00003400-000034ff
PREFETCH window: 30000000-31ffffff
MEM window: 36000000-37ffffff
PCI: Bus 13, cardbus bridge: 0000:08:03.1
IO window: 00003800-000038ff
IO window: 00003c00-00003cff
PREFETCH window: 32000000-33ffffff
MEM window: 38000000-39ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 3000-3fff
MEM window: f0200000-f02fffff
PREFETCH window: 30000000-33ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 22 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Enabling device 0000:08:03.1 (0080 -> 0083)
ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x7b set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1147860151.851:1): initialized
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NTFS driver 2.1.27 [Flags: R/W].
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Thermal Zone [TZ00] (27 C)
ACPI: Thermal Zone [TZ01] (27 C)
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.0.1 20051102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
floppy0: no floppy controllers found
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.3 addr 0xf0000000 irq 19 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:17:42:04:0c:3e
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
hda: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ata1: SATA max UDMA/133 cmd 0xE002E500 ctl 0x0 bmdma 0x0 irq 21
ata2: SATA max UDMA/133 cmd 0xE002E580 ctl 0x0 bmdma 0x0 irq 21
ata3: SATA max UDMA/133 cmd 0xE002E600 ctl 0x0 bmdma 0x0 irq 21
ata4: SATA max UDMA/133 cmd 0xE002E680 ctl 0x0 bmdma 0x0 irq 21
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ata1: SATA link up 1.5 Gbps (SStatus 113)
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3f01 87:6003 88:20ff
ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ahci
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ata2: SATA link down (SStatus 0)
scsi1 : ahci
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ata3: SATA link down (SStatus 0)
scsi2 : ahci
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ata4: SATA link down (SStatus 0)
scsi3 : ahci
Vendor: ATA Model: SAMSUNG HM080JI Rev: YC10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda:<4>sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sda1 sda2 <<4>sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:08:03.4[A] -> GSI 16 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[f0201000-f02017ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 22, io mem 0xf0644000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 22, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
usb 2-2: new low speed USB device using uhci_hcd and address 2
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
usb 2-2: configuration #1 chosen from 1 choice
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input0
input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.0-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 17 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
input: AT Translated Set 2 keyboard as /class/input/input1
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
ALSA device list:
#0: HDA Intel at 0xf0640000 irq 23
ip_conntrack version 2.4 (4019 buckets, 32152 max) - 224 bytes per conntrack
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e1003435956]
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 216k freed
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04793/0x302000
serio: Synaptics pass-through port at isa0060/serio4/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
Adding 248968k swap on /dev/sda6. Priority:-1 extents:1 across:248968k
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
EXT3 FS on sda5, internal journal
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
NTFS volume version 3.1.
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
input: PS/2 Generic Mouse as /class/input/input3
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: phy read timeout
sky2 eth0: enabling interface
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control none
ACPI: PCI Interrupt 0000:08:03.0[A] -> GSI 16 (level, low) -> IRQ 19
Yenta: CardBus bridge found at 0000:08:03.0 [10cf:131e]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 19
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: PCI Interrupt 0000:08:03.1[A] -> GSI 16 (level, low) -> IRQ 19
Yenta: CardBus bridge found at 0000:08:03.1 [10cf:131e]
Yenta: ISA IRQ mask 0x0c38, PCI irq 19
Socket status: 30000410
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
cs: IO port probe 0x3000-0x3fff: clean.
pcmcia: parent PCI bridge Memory window: 0xf0200000 - 0xf02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
pccard: PCMCIA card inserted into slot 1
mtrr: no more MTRRs available
mtrr: no more MTRRs available

That's my driver. I put a lot of fixes in for 2.6.17, one of which changes
the setup of the chip type used in this machine. The driver is significantly
changed from 2.6.16 so best bet is to just take the 2.6.17 latest version
and compile it on 2.6.16 (or update to 2.6.17). I got reports from Fujitsu E610
user that it now works fine.

Best regards,

--
============================================================================

Dimitris Zilaskos

Department of Physics @ Aristotle University of Thessaloniki , Greece
PGP key : http://tassadar.physics.auth.gr/~dzila/pgp_public_key.asc
http://egnatia.ee.auth.gr/~dzila/pgp_public_key.asc
MD5sum : de2bd8f73d545f0e4caf3096894ad83f pgp_public_key.asc
============================================================================

Next message: Jim Cromie: "Re: 2.6.17-rc4-mm1 nfsroot build err, looks related to klibc"
Previous message: David S. Miller: "Re: [PATCH] fix mem-leak in netfilter"
In reply to: Stephen Hemminger: "Re: events/0 eats 100% cpu on core duo laptop"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]