[PATCH] Still more typo fixes for RC1

From: Matt LaPlante
Date: Fri Jul 07 2006 - 13:46:21 EST


Here's another set of typo fixes for RC1. They should all be unique from previous patches.

By my count, this is in addition to 6 previous patches which are now waiting to be included in RC1. I've not yet received any feedback regarding them, so hopefully they are all clear to merge. If necessary, I can combine them all into a single patch at the request of the maintainers.

--
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
kernel1@xxxxxxxxxxxxxxxx
--

diff -ru a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
--- a/arch/arm/mach-s3c2410/Kconfig 2006-07-06 10:48:48.000000000 -0400
+++ b/arch/arm/mach-s3c2410/Kconfig 2006-07-06 11:28:09.000000000 -0400
@@ -6,7 +6,7 @@
bool "Simtec Electronics ANUBIS"
select CPU_S3C2440
help
- Say Y gere if you are using the Simtec Electronics ANUBIS
+ Say Y here if you are using the Simtec Electronics ANUBIS
development system

config MACH_OSIRIS
diff -ru a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig
--- a/arch/ppc/platforms/85xx/Kconfig 2006-07-06 10:42:57.000000000 -0400
+++ b/arch/ppc/platforms/85xx/Kconfig 2006-07-06 13:15:13.000000000 -0400
@@ -24,12 +24,12 @@
config MPC8548_CDS
bool "Freescale MPC8548 CDS"
help
- This option enablese support for the MPC8548 CDS evaluation board.
+ This option enables support for the MPC8548 CDS evaluation board.

config MPC8555_CDS
bool "Freescale MPC8555 CDS"
help
- This option enablese support for the MPC8555 CDS evaluation board.
+ This option enables support for the MPC8555 CDS evaluation board.

config MPC8560_ADS
bool "Freescale MPC8560 ADS"
@@ -51,22 +51,22 @@
config TQM8540
bool "TQ Components TQM8540"
help
- This option enablese support for the TQ Components TQM8540 board.
+ This option enables support for the TQ Components TQM8540 board.

config TQM8541
bool "TQ Components TQM8541"
help
- This option enablese support for the TQ Components TQM8541 board.
+ This option enables support for the TQ Components TQM8541 board.

config TQM8555
bool "TQ Components TQM8555"
help
- This option enablese support for the TQ Components TQM8555 board.
+ This option enables support for the TQ Components TQM8555 board.

config TQM8560
bool "TQ Components TQM8560"
help
- This option enablese support for the TQ Components TQM8560 board.
+ This option enables support for the TQ Components TQM8560 board.

endchoice

@@ -94,7 +94,7 @@
default y

config 85xx_PCI2
- bool "Supprt for 2nd PCI host controller"
+ bool "Support for 2nd PCI host controller"
depends on MPC8555_CDS
default y

diff -ru a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
--- a/arch/xtensa/Kconfig 2006-07-06 10:49:01.000000000 -0400
+++ b/arch/xtensa/Kconfig 2006-07-06 11:30:58.000000000 -0400
@@ -206,7 +206,7 @@

endmenu

-menu "Exectuable file formats"
+menu "Executable file formats"

# only elf supported
config KCORE_ELF
@@ -241,7 +241,7 @@
bool "Embed root filesystem ramdisk into the kernel"

config EMBEDDED_RAMDISK_IMAGE
- string "Filename of gziped ramdisk image"
+ string "Filename of gzipped ramdisk image"
depends on EMBEDDED_RAMDISK
default "ramdisk.gz"
help
diff -ru a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig
--- a/drivers/infiniband/ulp/ipoib/Kconfig 2006-07-06 10:45:13.000000000 -0400
+++ b/drivers/infiniband/ulp/ipoib/Kconfig 2006-07-06 13:50:52.000000000 -0400
@@ -27,7 +27,7 @@
bool "IP-over-InfiniBand data path debugging"
depends on INFINIBAND_IPOIB_DEBUG
---help---
- This option compiles debugging code into the the data path
+ This option compiles debugging code into the data path
of the IPoIB driver. The output can be turned on via the
data_debug_level module parameter; however, even with output
turned off, this debugging code will have some performance
diff -ru a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
--- a/drivers/media/video/cx88/Kconfig 2006-07-06 10:49:13.000000000 -0400
+++ b/drivers/media/video/cx88/Kconfig 2006-07-06 12:21:12.000000000 -0400
@@ -88,7 +88,7 @@
select DVB_MT352
---help---
This adds DVB-T support for cards based on the
- Connexant 2388x chip and the MT352 demodulator.
+ Conexant 2388x chip and the MT352 demodulator.

config VIDEO_CX88_DVB_VP3054
bool "VP-3054 Secondary I2C Bus Support"
@@ -97,7 +97,7 @@
select VIDEO_CX88_VP3054
---help---
This adds DVB-T support for cards based on the
- Connexant 2388x chip and the MT352 demodulator,
+ Conexant 2388x chip and the MT352 demodulator,
which also require support for the VP-3054
Secondary I2C bus, such at DNTV Live! DVB-T Pro.

@@ -108,7 +108,7 @@
select DVB_ZL10353
---help---
This adds DVB-T support for cards based on the
- Connexant 2388x chip and the ZL10353 demodulator,
+ Conexant 2388x chip and the ZL10353 demodulator,
successor to the Zarlink MT352.

config VIDEO_CX88_DVB_OR51132
@@ -118,7 +118,7 @@
select DVB_OR51132
---help---
This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the OR51132 demodulator.
+ Conexant 2388x chip and the OR51132 demodulator.

config VIDEO_CX88_DVB_CX22702
bool "Conexant CX22702 DVB-T Support"
@@ -127,7 +127,7 @@
select DVB_CX22702
---help---
This adds DVB-T support for cards based on the
- Connexant 2388x chip and the CX22702 demodulator.
+ Conexant 2388x chip and the CX22702 demodulator.

config VIDEO_CX88_DVB_LGDT330X
bool "LG Electronics DT3302/DT3303 ATSC Support"
@@ -136,7 +136,7 @@
select DVB_LGDT330X
---help---
This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the LGDT3302/LGDT3303 demodulator.
+ Conexant 2388x chip and the LGDT3302/LGDT3303 demodulator.

config VIDEO_CX88_DVB_NXT200X
bool "NXT2002/NXT2004 ATSC Support"
@@ -145,7 +145,7 @@
select DVB_NXT200X
---help---
This adds ATSC 8VSB and QAM64/256 support for cards based on the
- Connexant 2388x chip and the NXT2002/NXT2004 demodulator.
+ Conexant 2388x chip and the NXT2002/NXT2004 demodulator.

config VIDEO_CX88_DVB_CX24123
bool "Conexant CX24123 DVB-S Support"
@@ -155,4 +155,4 @@
select DVB_ISL6421
---help---
This adds DVB-S support for cards based on the
- Connexant 2388x chip and the CX24123 demodulator.
+ Conexant 2388x chip and the CX24123 demodulator.
diff -ru a/drivers/net/Kconfig b/drivers/net/Kconfig
--- a/drivers/net/Kconfig 2006-07-06 10:49:13.000000000 -0400
+++ b/drivers/net/Kconfig 2006-07-06 13:48:38.000000000 -0400
@@ -2071,7 +2071,7 @@
depends on PCI && EXPERIMENTAL
select CRC32
---help---
- This driver supports Gigabit Ethernet adapters based on the the
+ This driver supports Gigabit Ethernet adapters based on the
Marvell Yukon 2 chipset:
Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/
88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21
diff -ru a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
--- a/drivers/pci/hotplug/Kconfig 2006-07-06 10:44:29.000000000 -0400
+++ b/drivers/pci/hotplug/Kconfig 2006-07-06 14:05:06.000000000 -0400
@@ -165,7 +165,7 @@
tristate "RPA PCI Hotplug driver"
depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
help
- Say Y here if you have a a RPA system that supports PCI Hotplug.
+ Say Y here if you have a RPA system that supports PCI Hotplug.

To compile this driver as a module, choose M here: the
module will be called rpaphp.
diff -ru a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig
--- a/drivers/usb/atm/Kconfig 2006-07-06 10:44:33.000000000 -0400
+++ b/drivers/usb/atm/Kconfig 2006-07-06 13:56:14.000000000 -0400
@@ -64,7 +64,7 @@
Say Y here if you have a DSL USB modem not explicitly supported by
another USB DSL drivers. In order to use your modem you will need to
pass the vendor ID, product ID, and endpoint numbers for transmission
- and reception as module parameters. You may need to initialize the
+ and reception as module parameters. You may need to initialize
the modem using a user space utility (a firmware loader for example).

To compile this driver as a module, choose M here: the
diff -ru a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
--- a/drivers/usb/gadget/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/drivers/usb/gadget/Kconfig 2006-07-06 14:04:48.000000000 -0400
@@ -7,7 +7,7 @@
#
# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
-# - Some systems have both kinds of of controller.
+# - Some systems have both kinds of controllers.
#
# With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
diff -ru a/drivers/video/Kconfig b/drivers/video/Kconfig
--- a/drivers/video/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/drivers/video/Kconfig 2006-07-06 13:56:46.000000000 -0400
@@ -181,7 +181,7 @@
bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
help
This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
- color QVGA, HRTFT panel. The LogicPD device includes an
+ color QVGA, HRTFT panel. The LogicPD device includes
an integrated HRTFT controller IC.
The native resolution is 240x320.

diff -ru a/fs/cifs/README b/fs/cifs/README
--- a/fs/cifs/README 2006-07-06 10:49:20.000000000 -0400
+++ b/fs/cifs/README 2006-07-06 14:09:41.000000000 -0400
@@ -269,7 +269,7 @@
(gid) mount option is specified. For the uid (gid) of newly
created files and directories, ie files created since
the last mount of the server share, the expected uid
- (gid) is cached as as long as the inode remains in
+ (gid) is cached as long as the inode remains in
memory on the client. Also note that permission
checks (authorization checks) on accesses to a file occur
at the server, but there are cases in which an administrator
@@ -375,7 +375,7 @@
the local process on newly created files, directories, and
devices (create, mkdir, mknod). If the CIFS Unix Extensions
are not negotiated, for newly created files and directories
- instead of using the default uid and gid specified on the
+ instead of using the default uid and gid specified on
the mount, cache the new file's uid and gid locally which means
that the uid for the file can change when the inode is
reloaded (or the user remounts the share).
@@ -440,7 +440,7 @@
create device files and fifos in a format compatible with
Services for Unix (SFU). In addition retrieve bits 10-12
of the mode via the SETFILEBITS extended attribute (as
- SFU does). In the future the bottom 9 bits of the mode
+ SFU does). In the future the bottom 9 bits of the
mode also will be emulated using queries of the security
descriptor (ACL).
sign Must use packet signing (helps avoid unwanted data modification
diff -ru a/fs/Kconfig b/fs/Kconfig
--- a/fs/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/fs/Kconfig 2006-07-06 14:02:55.000000000 -0400
@@ -1319,7 +1319,7 @@

If you have floppies or hard disk partitions like that, it is likely
that they contain binaries from those other Unix systems; in order
- to run these binaries, you will want to install linux-abi which is a
+ to run these binaries, you will want to install linux-abi which is
a set of kernel modules that lets you run SCO, Xenix, Wyse,
UnixWare, Dell Unix and System V programs under Linux. It is
available via FTP (user: ftp) from
diff -ru a/net/ipv4/ipvs/Kconfig b/net/ipv4/ipvs/Kconfig
--- a/net/ipv4/ipvs/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/net/ipv4/ipvs/Kconfig 2006-07-06 13:49:13.000000000 -0400
@@ -204,7 +204,7 @@
connections to the server with the shortest expected delay. The
expected delay that the job will experience is (Ci + 1) / Ui if
sent to the ith server, in which Ci is the number of connections
- on the the ith server and Ui is the fixed service rate (weight)
+ on the ith server and Ui is the fixed service rate (weight)
of the ith server.

If you want to compile it in kernel, say Y. To compile it as a
diff -ru a/net/ipv4/Kconfig b/net/ipv4/Kconfig
--- a/net/ipv4/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/net/ipv4/Kconfig 2006-07-06 11:56:11.000000000 -0400
@@ -556,7 +556,7 @@
default n
---help---
TCP Low Priority (TCP-LP), a distributed algorithm whose goal is
- to utiliza only the excess network bandwidth as compared to the
+ to utilize only the excess network bandwidth as compared to the
``fair share`` of bandwidth as targeted by TCP.
See http://www-ece.rice.edu/networks/TCP-LP/

diff -ru a/security/selinux/Kconfig b/security/selinux/Kconfig
--- a/security/selinux/Kconfig 2006-07-06 11:14:24.000000000 -0400
+++ b/security/selinux/Kconfig 2006-07-06 13:57:18.000000000 -0400
@@ -122,5 +122,5 @@
well as any conntrack helpers for protocols which you
wish to control.

- If you are unsure what do do here, select N.
+ If you are unsure what to do here, select N.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/