Re: [patch 2/3] add CSA accounting to taskstats

[Shailabh Nagar]

Jay Lan wrote:
> This patch add CSA accounting fields to the taskstats struct
> and a kernel/csa.c to fill the data on exit.
> 
> 
> Signed-off-by:  Jay Lan <jlan@xxxxxxx>
> 
> 
> ------------------------------------------------------------------------
> 
> Index: linux/include/linux/taskstats.h
> ===================================================================
> --- linux.orig/include/linux/taskstats.h	2006-07-31 11:42:10.000000000 -0700
> +++ linux/include/linux/taskstats.h	2006-07-31 11:50:00.412433042 -0700
> @@ -107,6 +107,21 @@ struct taskstats {
>  	__u64	ac_utime;		/* User CPU time [usec] */
>  	__u64	ac_stime;		/* SYstem CPU time [usec] */
>  	/* Basic Accounting Fields end */
> +
> + 	/* CSA accounting fields start */
> + 	__u16	csa_revision;		/* CSA Revision */

May be helpful to add a note here that every time csa_revision is changed,
TASKSTATS_VERSION also needs to be bumped up.

> + 	__u16	csa_pad[3];		/* Unused */


> + 	__u64	acct_rss_mem1;		/* accumulated rss usage */
> + 	__u64	acct_vm_mem1;		/* accumulated virtual memory usage */
> + 	__u64	hiwater_rss;		/* High-watermark of RSS usage */
> + 	__u64	hiwater_vm;		/* High-water virtual memory usage */


> + 	__u64	ac_minflt;		/* Minor Page Fault */
> + 	__u64	ac_majflt;		/* Major Page Fault */

Can the number of prefixes be reduced ? In the space of a few fields, we have
ac_*, csa_*, acct_* and plain (for hiwater_rss/vm)


> + 	__u64	ac_chr;			/* bytes read */
> + 	__u64	ac_chw;			/* bytes written */
> + 	__u64	ac_scr;			/* read syscalls */
> + 	__u64	ac_scw;			/* write syscalls */

read_char,
write_char,
read_syscalls,
write_syscalls,

perhaps (esp. if you're dropping the ac_ prefix) ?

> + 	/* CSA accounting fields end */
>  };


>  
>  
> Index: linux/init/Kconfig
> ===================================================================
> --- linux.orig/init/Kconfig	2006-07-31 11:38:21.000000000 -0700
> +++ linux/init/Kconfig	2006-07-31 11:47:23.214410140 -0700
> @@ -182,6 +182,31 @@ config TASK_DELAY_ACCT
>  
>  	  Say N if unsure.
>  
> +config CSA_ACCT
> +	bool "Enable CSA Job Accounting (EXPERIMENTAL)"
> +	depends on TASKSTATS
> +	help
> +	  Comprehensive System Accounting (CSA) provides job level
> +	  accounting of resource usage.  The accounting records are
> +	  written by the kernel into a file.  CSA user level scripts
> +	  and commands process the binary accounting records and
> +	  combine them by job identifier within system boot uptime
> +	  periods.  These accounting records are then used to produce
> +	  reports and charge fees to users.
> +
> +	  Say Y here if you want job level accounting to be compiled
> +	  into the kernel.  Say M here if you want the writing of
> +	  accounting records portion of this feature to be a loadable
> +	  module.  Say N here if you do not want job level accounting
> +	  (the default).

The description above is tied to jobs which don't exist in the kernel.
There's no dependency of CSA on kernel-visible jobs anymore, right ?
Perhaps the blurb can clarify that jobs are defined in user space.

> +
> +	  The CSA commands and scripts package needs to be installed
> +	  to process the CSA accounting records.  See
> +	  http://oss.sgi.com/projects/csa for further information
> +	  about CSA and download instructions for the CSA commands
> +	  package and documentation.
> +
> +
>  config SYSCTL
>  	bool "Sysctl support" if EMBEDDED
>  	default y
> Index: linux/kernel/Makefile
> ===================================================================
> --- linux.orig/kernel/Makefile	2006-07-31 11:38:21.000000000 -0700
> +++ linux/kernel/Makefile	2006-07-31 11:47:23.218410191 -0700
> @@ -50,6 +50,7 @@ obj-$(CONFIG_RCU_TORTURE_TEST) += rcutor
>  obj-$(CONFIG_RELAY) += relay.o
>  obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
>  obj-$(CONFIG_TASKSTATS) += taskstats.o
> +obj-$(CONFIG_CSA_ACCT) += csa.o
>  
>  ifneq ($(CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER),y)
>  # According to Alan Modra <alan@xxxxxxxxxxxxxxxx>, the -fno-omit-frame-pointer is
> Index: linux/kernel/csa.c
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ linux/kernel/csa.c	2006-07-31 11:47:23.218410191 -0700
> @@ -0,0 +1,46 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (c) 2006 Silicon Graphics, Inc All Rights Reserved.
> + */
> +
> +
> +/*
> + *  CSA (Comprehensive System Accounting)
> + *  Job Accounting for Linux
> + *
> + *  This header file contains the definitions needed for job
> + *  accounting. The kernel CSA accounting module code and all
> + *  user-level programs that try to write or process the binary job
> + *  accounting data must include this file.

Again, job dependency might need some clarification.

> + *
> + *  This kernel header file and the csa.h in the csa userland source
> + *  rpm share same data struct declaration and #define's. Do not modify
> + *  one without modify the other one as well. The compatibility between
> + *  userland and the kernel is ensured by using the 'ah_revision' field
> + *  of struct achead.

Leftover from older documentation ?

> + *
> + */
> +
> +#include <linux/taskstats.h>
> +#include <linux/csa_kern.h>
> +#include <linux/sched.h>
> +
> +void csa_add_tsk(struct taskstats *stats, struct task_struct *p)
> +{
> +	stats->csa_revision = REV_CSA;
> +	stats->acct_rss_mem1 = p->acct_rss_mem1;
> +	stats->acct_vm_mem1  = p->acct_vm_mem1;
> +	if (p->mm) {
> +		stats->hiwater_rss   = p->mm->hiwater_rss;
> +		stats->hiwater_vm    = p->mm->hiwater_vm;
> +	}
> +	stats->ac_minflt = p->min_flt;
> +	stats->ac_majflt = p->maj_flt;
> +	stats->ac_chr	= p->rchar;
> +	stats->ac_chw	= p->wchar;
> +	stats->ac_scr	= p->syscr;
> +	stats->ac_scw	= p->syscw;
> +}
> Index: linux/kernel/taskstats.c
> ===================================================================
> --- linux.orig/kernel/taskstats.c	2006-07-31 11:44:54.000000000 -0700
> +++ linux/kernel/taskstats.c	2006-07-31 11:47:23.218410191 -0700
> @@ -21,6 +21,7 @@
>  #include <linux/taskstats_kern.h>
>  #include <linux/acct.h>
>  #include <linux/delayacct.h>
> +#include <linux/csa_kern.h>
>  #include <linux/cpumask.h>
>  #include <linux/percpu.h>
>  #include <net/genetlink.h>
> @@ -252,6 +253,9 @@ static int fill_pid(pid_t pid, struct ta
>  	/* fill in basic acct fields */
>  	bacct_add_tsk(stats, tsk);
>  
> +	/* fill in csa fields */
> +	csa_add_tsk(stats, tsk);
> +
>  	/* Define err: label here if needed */
>  	put_task_struct(tsk);
>  	return rc;
> Index: linux/include/linux/csa_kern.h
> ===================================================================
> --- /dev/null	1970-01-01 00:00:00.000000000 +0000
> +++ linux/include/linux/csa_kern.h	2006-07-31 11:47:23.218410191 -0700
> @@ -0,0 +1,31 @@
> +/*
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (c) 2006 Silicon Graphics, Inc All Rights Reserved.
> + */
> +
> +#ifndef _CSA_KERN_H
> +#define _CSA_KERN_H
> +
> +#ifdef CONFIG_CSA_ACCT
> +extern void csa_add_tsk(struct taskstats *, struct task_struct *);
> +#else
> +#define csa_add_tsk(x)		do { } while (0)

This won't compile right...number of args differ.

> +#endif
> +
> +/*
> + * Record revision levels.
> + *
> + * These are incremented to indicate that a record's format has changed since
> + * a previous release.
> + *
> + * History:     05000   The first rev in Linux
> + *              06000   Major rework to clean up unused fields and features.
> + *                      No binary compatibility with earlier rev.
> + *		07000	Convert to taskstats interface
> + */
> +#define REV_CSA		07000	/* Kernel: CSA base record */
> +
> +#endif	/* _CSA_KERN_H */
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/