Re: debug prism wlan
Date: Sat Aug 12 2006 - 16:47:06 EST
*grrrr* it is too late on evening (I'm living in germany ;) )...
I also fogot to tell following:
Error for wireless request "Set Frequency" (8B04) :
SET failed on device eth2 ; Input/output error.
I got this message if I try to start the net device with the init.d script.
If I try to set the channel per hand I got no error but the channel gets not
set (it still is 0). But I am able to set the mode and the essid.
Am Samstag, 12. August 2006 22:26 schrieb Daniel:
> Oh, sorry I have forgotten to tell:
> drunken init # lspci |grep Prism
> 00:08.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism
> Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
> So I'm using the prism54 driver (CONFIG_PRISM54). My version of
> wireless-tools is 29_pre10 and the version of the used firmware is 18.104.22.168.
> BTW: I tried
> # modprobe prism54 pc_debug=1
> # modprobe prism54 pc_debug=9999999
> But it doesn't increased the verbose level.
> The firmware upload was successfull (according to dmesg).
> Am Samstag, 12. August 2006 20:15 schrieben Sie:
> > On Saturday 12 August 2006 22:40, Daniel wrote:
> > > Hi,
> > > my wlan gives up working somewhere between upgrading to gcc-4.1,
> > > changing some kernel options and upgrading to linux-2.8.16-r4.
> > Hi Daniel,
> > Which driver does this card use? There's a couple Prism 1/2/2.5 802.11b
> > drivers and a Prism54 driver for 802.11g cards. Any ideas?
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/