Re: 2.6.18-rc4-mm1: eth0: trigger_send() called with the transmitterbusy
From: Laurent Riffard
Date: Mon Aug 14 2006 - 16:02:47 EST
Le 14.08.2006 19:47, Laurent Riffard a écrit :
> Le 14.08.2006 18:50, Andrew Morton a écrit :
>> On Mon, 14 Aug 2006 16:38:47 +0200
>> Laurent Riffard <laurent.riffard@xxxxxxx> wrote:
>>> Le 13.08.2006 10:24, Andrew Morton a __crit :
>>> This morning, while trying to suspend to disk, my box started to loop
>>> displaying the following message:
>>> eth0: trigger_send() called with the transmitter busy.
>>> Here is the scenario. I booted 2.6.18-rc4-mm1 with this command line:
>>> root=/dev/vglinux1/lvroot video=vesafb:ywrap,mtrr splash=silent resume=/dev/hdb7 netconsole=@xxxxxxxxxxx/,@192.168.0.1/00:0E:9B:91:ED:72 init 1
>>> Then I issued:
>>> # echo 6 > /proc/sys/kernel/printk
>>> # echo disk > /sys/power/state
>> ne2k isn't <ahem> the most actively-maintained driver.
>> But most (I think all) net drivers have problems during suspend when
>> netconsole is active. Does disabling netconsole help?
> Yes it does.
>> Did this operation work OK in earlier kernels, with netconsole enabled?
> It's the first time I see such a message. I can't speak for 2.6.18-rc3-mm2
> because it could not suspend at all (did hang right after
> "echo disk > /sys/power/state"), but it worked in earlier kernels.
> I'll try with plain 2.6.18-rc4.
Same problem with 2.6.18-rc4. I'll try earlier -rc kernel tomorrow.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/