[BUG?] 2.6.17.x suspend problems

From: Patrizio Bassi
Date: Mon Aug 28 2006 - 07:44:35 EST


when i try to suspend my notebook i have problems with ide controller.
the copy lasts a lot and i get oops.


Stopping tasks: ==========================================|
Shrinking memory... done (22776 pages freed)
pnp: Device 00:08 disabled.
swsusp: Need to copy 30898 pages
ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI - using IRQ 14
eth0: Media Link Off
ACPI: PCI Interrupt 0000:00: 01.2[D] -> Link [LNKD] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level,
low) -> IRQ 5
ACPI: PCI Interrupt 0000:00:01.6[B] -> Link [LNKB] -> GSI 5 (level,
low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:02.0 to 64
PM: Writing back config space on device 0000:00:0a.0 at offset 1 (was
82100003, writing 82100007)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 11 (level,
low) -> IRQ 11
PM: Writing back config space on device 0000:00:0a.1 at offset 1 (was
2100003, writing 82100007)
ACPI: PCI Interrupt 0000:00: 0a.1[B] -> Link [LNKC] -> GSI 5 (level,
low) -> IRQ 5
pnp: Device 00:08 activated.
pnp: Failed to activate device 00:0c.
pnp: Failed to activate device 00:0d.
irq 14: nobody cared (try booting with the "irqpoll" option)
<c012c987> __report_bad_irq+0x2b/0x69 <c012cb3d> note_interrupt+0x178/0x1a7
<c012c53d> handle_IRQ_event+0x22/0x4e <c012c5ce> __do_IRQ+0x65/0x8f
<c0104b2d> do_IRQ+0x19/0x24 <c01033da> common_interrupt+0x1a/0x20
<c0118f4b> __do_softirq+0x2c/0x7f <c0118fc0> do_softirq+0x22/0x26
<c0104b32> do_IRQ+0x1e/0x24 <c01033da> common_interrupt+0x1a/0x20
<c0214224> acpi_processor_idle+0x157/0x323 <c0101da2> cpu_idle+0x3a/0x4f
<c03b0635> start_kernel+0x29c/0x29e
handlers:
[<c0230301>] (ide_intr+0x0/0x16c)
Disabling IRQ #14
Restarting tasks... done
hda: dma_timer_expiry: dma status == 0x24
hda: DMA interrupt recovery
hda: lost interrupt

CPU0
0: 431861 XT-PIC timer
1: 638 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC yenta, ohci_hcd:usb1, ohci_hcd:usb2,
Trident Audio, SiS630, eth0
7: 0 XT-PIC parport0
8: 2 XT-PIC rtc
9: 1 XT-PIC acpi
11: 0 XT-PIC yenta
12: 10982 XT-PIC i8042
14: 200771 XT-PIC ide0
15: 26 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 80)
00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 07)
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 01)
00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
Controller (rev a0)
00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
PCI-to-PCI bridge (AGP)
00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter (rev 11)



I have another two problems too:
1) have to disable synaptics driver (editing sources) otherwise i get
kernel panic
2) dri accelleration is working no more after suspend. glxgears shows
a black window only.

i think i should open 2 different threads for the last two.

please CC me, i'm not subscribed.


--

Patrizio Bassi
www.patriziobassi.it
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/