Re: [linux-usb-devel] Problem with USB storage devices, error -110

[Jan-Hendrik Zab]

On Fri, 1 Sep 2006 10:12:35 -0400 (EDT)
Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote:

> It seems pretty clear that the UHCI controller hardware on your PCI
> card isn't working.  The "len=-8/64" messages are a dead giveaway;
> you can't get a negative length with a timeout failure if the
> controller is working right.  At least, not unless you have some
> other USB devices already attached to the same controller and using
> up all the bandwidth.
> 
> The fact that it fails in the same way with all the USB devices you
> attach is another indicator that the controller is bad.

Thanks for the answers. :)

There is also a HP Deskjet 5652 attached to the card which is
recognized correctly and works just fine, as long as I do not insert
any USB storage device. Of course the printer is just a USB 1.1 device.
So I've tried without the ehci_hcd module loaded and everything seemed
to work as it should. (Well, sorry for not trying this earlier.) So, at
least the UHCI part seems to work as long as there are no EHCI
'functions' involved.
I'll try to get a new adaptor card then. 

Greets,
    Jan-Hendrik Zab

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/