RE: 2.6.18 bug in gdth.c [solved]

From: Leubner, Achim
Date: Fri Oct 13 2006 - 07:38:51 EST


Thanks for fixing the problem. If pci_map_page() can handle a call with
scp->request_bufflen=0 as a parameter then reverting this line should be ok. Otherwise we should not remove the line but add the initialization of
cmdp->u.raw64.sg_ranz respective cmdp->u.raw.sg_ranz to 0 before (where the initialization of all other elements like "reserved", "mdisc_time" etc. take place).

Thanks,
Achim Leubner

=======================
Achim Leubner
Software Engineer / RAID drivers
ICP vortex GmbH / Adaptec Inc.
Phone: +49-351-8718291
 
________________________________________
From: Jerome Borsboom [mailto:j.borsboom@xxxxxxxxxxxx]
Sent: Freitag, 13. Oktober 2006 13:04
To: linux-kernel@xxxxxxxxxxxxxxx
Cc: Leubner, Achim
Subject: 2.6.18 bug in gdth.c [solved]

Recent changes in the gdth.c driver introduced an 'unable to handle kernel paging request' bug. The offending change seems to be following change in 'gdth_fill_raw_cmd':

@@ -3022,7 +3148,7 @@ #ifdef GDTH_STATISTICS
             }
#endif
-        } else {
+        } else if (scp->request_bufflen) {
             scp->SCp.Status = GDTH_MAP_SINGLE;
             scp->SCp.Message = PCI_DMA_BIDIRECTIONAL;
             page = virt_to_page(scp->request_buffer);

Reverting this line, make the driver stable again. My hypothesis is that when scp->request_bufflen is 0, then cmdp->u.raw.sg_ranz will not be assigned which makes the subsequent ha->cmd_len calculation misbehave. When you compare gdth_fill_raw_cmd with gdth_fill_cache_cmd, then in the latter function cmdp- >u.cache.sg_canz IS assigned before the conditional 'if (scp- >use_sg)...'


Jerome Borsboom

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/