Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)

From: Avi Kivity
Date: Wed Oct 18 2006 - 01:32:48 EST


Ryan Richter wrote:

> > Try adding all-generic-ide to the kernel command line, and if that
> > fails, post your lspci output.
>
I tried this and also the Marvell PATA driver you posted, and still
nothing.

Here's my lspci output and my current .config:


02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])


My own lspci says:

02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)

and the DVD works:

Unknown: IDE controller at PCI slot 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Unknown: chipset revision 177
Unknown: 100% native mode on irq 169
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive
ide0 at 0x2018-0x201f,0x2026 on irq 169

Since I'm running a Fedora kernel, you might want to look at their patchlist and .config. I briefly ran mainline, but I can't remember if I accessed the drive while running that.

--
Do not meddle in the internals of kernels, for they are subtle and quick to panic.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/