[Patch] PCI: check szhi when sz is 0 for 64 bit pref mem

From: Yinghai Lu
Date: Sat Nov 04 2006 - 01:01:18 EST


Please check the patch. [Patch] PCI: check szhi when sz is 0 for 64 bit pref mem

For co-prcessor with mem installed, the ram will be treated to pref mem.
Under 64bit kernel, when 64bit pref mem size is above 4G, sz from pci_size in low bits, will get 0,
at this point, we need to check szhi too. Otherwise the pre-set value by firmware can not be read
to resrource struct, it will skip that resource, and try to hi 32 bit as another 32bit resource.

Cc: Myles Watson <myles@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Yinghai Lu <yinghai.lu@xxxxxxx>


--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -165,8 +165,13 @@ static void pci_read_bases(struct pci_de
l = 0;
if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
- if (!sz)
- continue;
+ /* for 64bit pref, sz could be 0, if the real size is bigger than 4G,
+ so need to check szhi for it
+ */
+ if ((l & (PCI_BASE_ADDRESS_SPACE | PCI_BASE_ADDRESS_MEM_TYPE_MASK))
+ != (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64))
+ if (!sz)
+ continue;
res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
} else {
@@ -188,6 +193,12 @@ static void pci_read_bases(struct pci_de
szhi = pci_size(lhi, szhi, 0xffffffff);
next++;
#if BITS_PER_LONG == 64
+ if( !sz && !szhi) {
+ res->start = 0;
+ res->end = 0;
+ res->flags = 0;
+ continue;
+ }
res->start |= ((unsigned long) lhi) << 32;
res->end = res->start + sz;
if (szhi) {