Re: tg3_read_partno(): possible array overrun

From: Michael Chan
Date: Mon Nov 06 2006 - 14:14:42 EST


On Mon, 2006-11-06 at 10:45 +0100, Adrian Bunk wrote:
> The Coverity checker noted the following in drivers/net/tg3.c:
>
> <-- snip -->
>
> The problem is that vpd_data[i + 2] could be vpd_data[255 + 2].

Thanks. This should fix it:

[TG3]: Fix array overrun in tg3_read_partno().

Use proper upper limits for the loops and check for all error
conditions.

The problem was noticed by Adrian Bunk.

Signed-off-by: Michael Chan <mchan@xxxxxxxxxxxx>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 8f059b7..06e4f77 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -10212,7 +10212,7 @@ skip_phy_reset:
static void __devinit tg3_read_partno(struct tg3 *tp)
{
unsigned char vpd_data[256];
- int i;
+ unsigned int i;
u32 magic;

if (tg3_nvram_read_swab(tp, 0x0, &magic))
@@ -10258,9 +10258,9 @@ static void __devinit tg3_read_partno(st
}

/* Now parse and find the part number. */
- for (i = 0; i < 256; ) {
+ for (i = 0; i < 254; ) {
unsigned char val = vpd_data[i];
- int block_end;
+ unsigned int block_end;

if (val == 0x82 || val == 0x91) {
i = (i + 3 +
@@ -10276,21 +10276,26 @@ static void __devinit tg3_read_partno(st
(vpd_data[i + 1] +
(vpd_data[i + 2] << 8)));
i += 3;
- while (i < block_end) {
+
+ if (block_end > 256)
+ goto out_not_found;
+
+ while (i < (block_end - 2)) {
if (vpd_data[i + 0] == 'P' &&
vpd_data[i + 1] == 'N') {
int partno_len = vpd_data[i + 2];

- if (partno_len > 24)
+ i += 3;
+ if (partno_len > 24 || (partno_len + i) > 256)
goto out_not_found;

memcpy(tp->board_part_number,
- &vpd_data[i + 3],
- partno_len);
+ &vpd_data[i], partno_len);

/* Success. */
return;
}
+ i += 3 + vpd_data[i + 2];
}

/* Part number not found. */



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/