problem after s2ram restore with password-protected hdd
From: Jody Belka
Date: Thu Nov 16 2006 - 08:30:51 EST
[Please cc me on any reply, as i'm not subscribed]
I tried to use s2ram today on my Dell Inspiron 6000, but i'm having problems
after wake-up when I have the hard drives internal password enabled (the
normal state for this machine). If i turn the password off, everything works
fine. I note that the password screen doesn't appear during wake-up, although
the bios help text implies that it should do.
Well, works fine as long as I follow the advice at en.opensuse.org/S2ram
and don't include vga=795 on the command-line, as I have an ATI Radeon
graphics chipset. annoying, although I am in X usually anyway. Any news on
that front?
J
--
Jody Belka
<knew (at) pimb (dot) org>
uname -a: Linux atlas 2.6.18-rc6-local-evms #1 PREEMPT Tue Sep 12 14:37:12 BST
2006 i686 GNU/Linux
s2ram -i:
=====================
This machine can be identified by:
sys_vendor = "Dell Inc."
sys_product = "Inspiron 6000 "
sys_version = ""
bios_version = "A09"
See http://en.opensuse.org/S2ram for details.
If you report a problem, please include the complete output above.
=====================
netconsole log (trimmed, it went on for 8 megs):
[ 203.368000] netconsole: network logging started
<<< s2ram >>>
[ 217.372000] Stopping tasks: ========================================================|
<<< wake-up >>>
[ 231.680000] ata2.00: configured for UDMA/33
[ 231.712000] ata1.00: configured for UDMA/100
[ 231.712000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 231.712000] sda: Write Protect is off
[ 231.712000] SCSI device sda: drive cache: write back
[ 233.200000] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 233.200000] b44: eth0: Flow control is off for TX and off for RX.
<<< at this point I triggered some disk activity with a 'ls /' >>>
[ 243.412000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.412000] ata1.00: (BMDMA stat 0x0)
[ 243.412000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.416000] ata1.00: (BMDMA stat 0x0)
[ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.416000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.416000] ata1.00: (BMDMA stat 0x0)
[ 243.416000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.416000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.420000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.420000] ata1: EH complete
[ 243.420000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.420000] ata1.00: (BMDMA stat 0x0)
[ 243.420000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.424000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 243.424000] sda: Current: sense key: Aborted Command
[ 243.424000] Additional sense: No additional sense information
[ 243.424000] end_request: I/O error, dev sda, sector 39892208
[ 243.424000] device-mapper: bbr: dm-bbr: device 254:0: I/O failure on sector 39619103. Scheduling for retry.
[ 243.424000] ata1: EH complete
[ 243.424000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 243.424000] sda: Write Protect is off
[ 243.428000] SCSI device sda: drive cache: write back
[ 243.428000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 243.428000] sda: Write Protect is off
[ 243.428000] SCSI device sda: drive cache: write back
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.436000] ata1: EH complete
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.436000] ata1: EH complete
[ 243.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.436000] ata1.00: (BMDMA stat 0x0)
[ 243.436000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: EH complete
[ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 243.440000] ata1.00: (BMDMA stat 0x0)
[ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: EH complete
[ 243.440000] ata1.00: limiting speed to UDMA/66
[ 243.440000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.440000] ata1.00: (BMDMA stat 0x0)
[ 243.440000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.440000] ata1: soft resetting port
[ 243.596000] ata1.00: configured for UDMA/66
[ 243.596000] ata1: EH complete
[ 243.596000] ata1.00: limiting speed to UDMA/44
[ 243.596000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.596000] ata1.00: (BMDMA stat 0x0)
[ 243.596000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.600000] ata1: soft resetting port
[ 243.756000] ata1.00: configured for UDMA/44
[ 243.756000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 243.756000] sda: Current: sense key: Aborted Command
[ 243.756000] Additional sense: No additional sense information
[ 243.756000] end_request: I/O error, dev sda, sector 39892208
[ 243.756000] ata1: EH complete
[ 243.760000] ata1.00: limiting speed to UDMA/33
[ 243.760000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.760000] ata1.00: (BMDMA stat 0x0)
[ 243.760000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.760000] ata1: soft resetting port
[ 243.916000] ata1.00: configured for UDMA/33
[ 243.916000] ata1: EH complete
[ 243.916000] ata1.00: limiting speed to UDMA/25
[ 243.916000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 243.916000] ata1.00: (BMDMA stat 0x0)
[ 243.916000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 243.916000] ata1: soft resetting port
[ 244.072000] ata1.00: configured for UDMA/25
[ 244.072000] ata1: EH complete
[ 244.072000] ata1.00: limiting speed to UDMA/16
[ 244.072000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.072000] ata1.00: (BMDMA stat 0x0)
[ 244.072000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.076000] ata1: soft resetting port
[ 244.232000] ata1.00: configured for UDMA/16
[ 244.232000] ata1: EH complete
[ 244.232000] ata1.00: limiting speed to PIO4
[ 244.232000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.232000] ata1.00: (BMDMA stat 0x0)
[ 244.232000] ata1.00: tag 0 cmd 0xc8 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.232000] ata1: soft resetting port
[ 244.388000] ata1.00: configured for PIO4
[ 244.388000] ata1: EH complete
[ 244.392000] ata1.00: limiting speed to PIO3
[ 244.392000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.392000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.392000] ata1: soft resetting port
[ 244.548000] ata1.00: configured for PIO3
[ 244.548000] ata1: EH complete
[ 244.548000] ata1.00: limiting speed to PIO2
[ 244.548000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.548000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.548000] ata1: soft resetting port
[ 244.708000] ata1.00: configured for PIO2
[ 244.708000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 244.708000] sda: Current: sense key: Aborted Command
[ 244.708000] Additional sense: No additional sense information
[ 244.708000] end_request: I/O error, dev sda, sector 39892208
[ 244.708000] ata1: EH complete
[ 244.708000] device-mapper: bbr: dm-bbr: device 254:0: Trying to remap bad sector 39619103 to sector 137
[ 244.708000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 244.712000] ata1.00: limiting speed to PIO1
[ 244.712000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.712000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.712000] ata1: soft resetting port
[ 244.868000] ata1.00: configured for PIO1
[ 244.868000] ata1: EH complete
[ 244.868000] ata1.00: limiting speed to PIO0
[ 244.868000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 244.868000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 244.872000] ata1: soft resetting port
[ 245.028000] ata1.00: configured for PIO0
[ 245.028000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.032000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.032000] ata1: EH complete
[ 245.032000] ata1.00: speed down requested but no transfer mode left
[ 245.032000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.032000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.036000] ata1: EH complete
[ 245.036000] ata1.00: speed down requested but no transfer mode left
[ 245.036000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 245.036000] ata1.00: tag 0 cmd 0x20 Emask 0x1 stat 0x51 err 0x4 (device error)
[ 245.036000] sd 0:0:0:0: SCSI error: return code = 0x08000002
[ 245.036000] sda: Current: sense key: Aborted Command
[ 245.036000] Additional sense: No additional sense information
[ 245.036000] end_request: I/O error, dev sda, sector 273242
[ 245.036000] ata1: EH complete
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/