Re: single bit errors on files stored on USB-HDDs via USB2/usb_storage

[Stefan Richter]

Matthias Schniedermeyer wrote:
> Robert Hancock wrote:
>> Matthias Schniedermeyer wrote:
>>> I have a 1,5 Meter and a 4,5 Meter cable connected to the USB-Controller
>>> and i only use of them depending on where the HDD is placed in my room,
>>> the other one is dangling unconnected.
>>>
>>> Then i will unconnect the short cable and use the long cable exclusivly
>>> and see if it gets better(tm).

BTW, I suspect front panel connectors could introduce noise too, via the
jumper cables from motherboard to the panel.

>> That long cable could be part of the problem - I don't think the USB
>> specification allows for cables that long (something like a 6 foot max
>> as I recall).
> 
> http://en.wikipedia.org/wiki/USB2
> 
> Says that 5 meters are allowed.

I don't know about USB 2.0, but in case of FireWire, ~4.5m long cables
are theoretically in spec too. I've got a FireWire 400 and a FireWire
800 cable this long, and both don't work very unreliable. Depending on
what's connected, they fail sooner or later. However due to how FireWire
works, this is immediately noticed as data CRC errors or bus resets.
I.e. it's nearly impossible for noisy hardware to _silently_ cause data
corruption. I would suppose USB has similar CRC checks.

Also, you mentioned that the corruption occurs systematically on certain
byte patterns. Therefore it's certainly not related to the cables.
-- 
Stefan Richter
-=====-=-==- ==-- -=---
http://arcgraph.de/sr/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/