[2.6.20-rc3] PATA_MARVELL: total machine freeze
From: Paolo Ornati
Date: Mon Jan 01 2007 - 09:39:15 EST
Hello,
Hardware
MOBO Intel DG965SS (chipset G965 Express)
PATA CDRW LG GCE-8400B
I'm using PATA_MARVELL driver, and trying to burn a CD results in a
total machine freeze (no SysRq / no output over serial console).
The freeze doesn't happens immediately: the writing process stalls for
several seconds during which the machine works flawlessy.
I've found that even a simple "sdparm -a /dev/sr0" have the same
effect, so I've done an strace:
execve("/usr/bin/sdparm", ["sdparm", "-a", "/dev/sr0"], [/* 63 vars */]) = 0
brk(0) = 0x52c000
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0b3000
uname({sys="Linux", node="tux", ...}) = 0
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=129796, ...}) = 0
mmap(NULL, 129796, PROT_READ, MAP_PRIVATE, 3, 0) = 0x2b3bfa0b4000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0000\322\1"..., 832) = 832
fstat(3, {st_mode=S_IFREG|0755, st_size=1256568, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0d4000
mmap(NULL, 2273448, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x2b3bfa1b4000
mprotect(0x2b3bfa2d6000, 1048576, PROT_NONE) = 0
mmap(0x2b3bfa3d6000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x122000) = 0x2b3bfa3d6000
mmap(0x2b3bfa3db000, 16552, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa3db000
close(3) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa3e0000
arch_prctl(ARCH_SET_FS, 0x2b3bfa3e06d0) = 0
mprotect(0x2b3bfa3d6000, 12288, PROT_READ) = 0
mprotect(0x2b3bfa1b2000, 4096, PROT_READ) = 0
munmap(0x2b3bfa0b4000, 129796) = 0
open("/dev/sr0", O_RDONLY|O_NONBLOCK) = 3
brk(0) = 0x52c000
brk(0x54d000) = 0x54d000
ioctl(3, SG_IO, 0x52c010) = 0
fstat(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 1), ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x2b3bfa0b4000
write(1, " /dev/sr0: HL-DT-ST CD-RW GC"..., 57) = 57
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Read write error recovery mode p"..., 37) = 37
write(1, " AWRE 0 [cha: n, def: "..., 35) = 35
write(1, " ARRE 0 [cha: n, def: "..., 35) = 35
write(1, " TB 0 [cha: n, def: "..., 35) = 35
write(1, " RC 0 [cha: n, def: "..., 35) = 35
write(1, " EER 0 [cha: n, def: "..., 35) = 35
write(1, " PER 0 [cha: n, def: "..., 35) = 35
write(1, " DTE 0 [cha: n, def: "..., 35) = 35
write(1, " DCR 0 [cha: y, def: "..., 35) = 35
write(1, " RRC 32 [cha: y, def: 3"..., 35) = 35
write(1, " COR_S 0 [cha: n, def: "..., 35) = 35
write(1, " HOC 0 [cha: n, def: "..., 35) = 35
write(1, " DSOC 0 [cha: n, def: "..., 35) = 35
write(1, " EMCDR 0 [cha: n, def: "..., 35) = 35
write(1, " WRC 0 [cha: n, def: "..., 35) = 35
write(1, " ERTL 0 [cha: n, def: "..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Write parameters (MMC) mode page"..., 34) = 34
write(1, " BUFE 0 [cha: y, def: "..., 35) = 35
write(1, " LS_V 0 [cha: n, def: "..., 35) = 35
write(1, " TST_W 0 [cha: y, def: "..., 35) = 35
write(1, " WR_T 1 [cha: y, def: "..., 35) = 35
write(1, " MULTI_S 0 [cha: y, def: "..., 35) = 35
write(1, " FP 0 [cha: y, def: "..., 35) = 35
write(1, " COPY 0 [cha: y, def: "..., 35) = 35
write(1, " TRACK_M 4 [cha: y, def: "..., 35) = 35
write(1, " DBT 8 [cha: y, def: "..., 35) = 35
write(1, " LINK_S 0 [cha: n, def: "..., 35) = 35
write(1, " IAC 0 [cha: y, def: "..., 35) = 35
write(1, " SESS_F 0 [cha: y, def: "..., 35) = 35
write(1, " PACK_S 0 [cha: y, def: "..., 35) = 35
write(1, " APL 150 [cha: y, def:15"..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Protocol specific logical unit m"..., 42) = 42
write(1, " LUPID 0 [cha: n, def: "..., 35) = 35
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
write(1, "Power condition mode page:\n", 27) = 27
write(1, " IDLE 1 [cha: n, def: "..., 35) = 35
write(1, " STANDBY 1 [cha: n, def: "..., 35) = 35
write(1, " ICT 1200 [cha: n, def:1"..., 37) = 37
write(1, " SCT 2400 [cha: n, def:2"..., 37) = 37
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO, 0x52c010) = 0
ioctl(3, SG_IO
^^^^^^^^^^^^^^^^^^^
I don't know why the output is truncated that way... anyway, as said
before, the machine works for something like 30s after this (in the
above example it survived >60s).
dmesg / lspci / config attached
Any idea?
--
Paolo Ornati
Linux 2.6.20-rc3 on x86_64
[ 0.000000] Linux version 2.6.20-rc3 (paolo@tux) (gcc version 4.1.1 (Gentoo 4.1.1-r1)) #46 SMP Tue Jan 2 10:46:33 CET 2007
[ 0.000000] Command line: root=/dev/sda6 video=intelfb:1024x768@60
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e599000 (usable)
[ 0.000000] BIOS-e820: 000000003e599000 - 000000003e5a6000 (reserved)
[ 0.000000] BIOS-e820: 000000003e5a6000 - 000000003e655000 (usable)
[ 0.000000] BIOS-e820: 000000003e655000 - 000000003e6a6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6a6000 - 000000003e6ab000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ab000 - 000000003e6ac000 (usable)
[ 0.000000] BIOS-e820: 000000003e6ac000 - 000000003e6f2000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e6f2000 - 000000003e6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
[ 0.000000] BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL DG965SS 0x00000629 0x01000013) @ 0x000000003e6fd038
[ 0.000000] ACPI: FADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6fc000
[ 0.000000] ACPI: MADT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f6000
[ 0.000000] ACPI: WDDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f5000
[ 0.000000] ACPI: MCFG (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f4000
[ 0.000000] ACPI: ASF! (v032 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f3000
[ 0.000000] ACPI: HPET (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x000000003e6f2000
[ 0.000000] ACPI: SSDT (v001 INTEL CpuPm 0x00000629 MSFT 0x01000013) @ 0x000000003e6aa000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a9000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a8000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a7000
[ 0.000000] ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000629 MSFT 0x01000013) @ 0x000000003e6a6000
[ 0.000000] ACPI: DSDT (v001 INTEL DG965SS 0x00000629 MSFT 0x01000013) @ 0x0000000000000000
[ 0.000000] Entering add_active_range(0, 0, 143) 0 entries of 256 used
[ 0.000000] Entering add_active_range(0, 256, 255385) 1 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255398, 255573) 2 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255659, 255660) 3 entries of 256 used
[ 0.000000] Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0 -> 143
[ 0.000000] 0: 256 -> 255385
[ 0.000000] 0: 255398 -> 255573
[ 0.000000] 0: 255659 -> 255660
[ 0.000000] 0: 255743 -> 255744
[ 0.000000] On node 0 totalpages: 255449
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1186 pages reserved
[ 0.000000] DMA zone: 2741 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3440 pages used for memmap
[ 0.000000] DMA32 zone: 248026 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000008f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e0000
[ 0.000000] Nosave address range: 00000000000e0000 - 0000000000100000
[ 0.000000] Nosave address range: 000000003e599000 - 000000003e5a6000
[ 0.000000] Nosave address range: 000000003e655000 - 000000003e6a6000
[ 0.000000] Nosave address range: 000000003e6a6000 - 000000003e6ab000
[ 0.000000] Nosave address range: 000000003e6ac000 - 000000003e6f2000
[ 0.000000] Nosave address range: 000000003e6f2000 - 000000003e6ff000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
[ 0.000000] PERCPU: Allocating 32192 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 250767
[ 0.000000] Kernel command line: root=/dev/sda6 video=intelfb:1024x768@60
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 30.695838] Console: colour VGA+ 80x25
[ 30.698825] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 30.699246] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 30.699375] Checking aperture...
[ 30.709425] Memory: 998844k/1022976k available (2528k kernel code, 22412k reserved, 1477k data, 232k init)
[ 30.768911] Calibrating delay using timer specific routine.. 3732.22 BogoMIPS (lpj=1866110)
[ 30.769204] Mount-cache hash table entries: 256
[ 30.769519] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.769583] CPU: L2 cache: 2048K
[ 30.769625] using mwait in idle threads.
[ 30.769668] CPU: Physical Processor ID: 0
[ 30.769711] CPU: Processor Core ID: 0
[ 30.769759] CPU0: Thermal monitoring enabled (TM2)
[ 30.769816] Freeing SMP alternatives: 28k freed
[ 30.769876] ACPI: Core revision 20060707
[ 30.787318] Using local APIC timer interrupts.
[ 30.840977] result 16650039
[ 30.841018] Detected 16.650 MHz APIC timer.
[ 30.842418] Booting processor 1/2 APIC 0x1
[ 30.853049] Initializing CPU#1
[ 30.912874] Calibrating delay using timer specific routine.. 3729.65 BogoMIPS (lpj=1864828)
[ 30.912881] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.912883] CPU: L2 cache: 2048K
[ 30.912886] CPU: Physical Processor ID: 0
[ 30.912887] CPU: Processor Core ID: 1
[ 30.912894] CPU1: Thermal monitoring enabled (TM2)
[ 30.913233] Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
[ 30.913885] Brought up 2 CPUs
[ 30.914323] testing NMI watchdog ... OK.
[ 30.924395] time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
[ 30.924444] time.c: Detected 1864.805 MHz processor.
[ 30.970831] migration_cost=25
[ 30.971498] NET: Registered protocol family 16
[ 30.971717] ACPI: bus type pci registered
[ 30.971766] PCI: Using configuration type 1
[ 30.982561] ACPI: Interpreter enabled
[ 30.982605] ACPI: Using IOAPIC for interrupt routing
[ 30.983723] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 30.983771] PCI: Probing PCI hardware (bus 00)
[ 30.983802] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 30.986227] Boot video device is 0000:00:02.0
[ 30.986935] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 30.986985] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 30.987956] PCI: Transparent bridge - 0000:00:1e.0
[ 30.988065] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 31.000280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 31.001963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.002617] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 31.003278] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.003934] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.004594] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
[ 31.005255] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 31.005913] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 31.006565] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 31.009995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 31.010531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 31.011077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 31.011612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 31.012153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 31.015799] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.015864] pnp: PnP ACPI init
[ 31.021767] pnp: PnP ACPI: found 13 devices
[ 31.022911] SCSI subsystem initialized
[ 31.023017] libata version 2.00 loaded.
[ 31.023140] usbcore: registered new interface driver usbfs
[ 31.023270] usbcore: registered new interface driver hub
[ 31.023408] usbcore: registered new device driver usb
[ 31.023596] PCI: Using ACPI for IRQ routing
[ 31.023640] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.023806] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 31.023930] hpet0: 3 64-bit timers, 14318180 Hz
[ 31.024989] PCI-GART: No AMD northbridge found.
[ 31.025165] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 31.025215] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 31.025264] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 31.026116] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 31.026166] PCI: Bridge: 0000:00:1c.0
[ 31.026208] IO window: disabled.
[ 31.026252] MEM window: 50400000-504fffff
[ 31.026297] PREFETCH window: disabled.
[ 31.026342] PCI: Bridge: 0000:00:1c.1
[ 31.026385] IO window: 2000-2fff
[ 31.026429] MEM window: 50100000-501fffff
[ 31.026475] PREFETCH window: disabled.
[ 31.026520] PCI: Bridge: 0000:00:1c.2
[ 31.026562] IO window: disabled.
[ 31.026606] MEM window: 50500000-505fffff
[ 31.026651] PREFETCH window: disabled.
[ 31.026696] PCI: Bridge: 0000:00:1c.3
[ 31.026737] IO window: disabled.
[ 31.026782] MEM window: 50600000-506fffff
[ 31.026827] PREFETCH window: disabled.
[ 31.026876] PCI: Bridge: 0000:00:1c.4
[ 31.026918] IO window: disabled.
[ 31.026962] MEM window: 50700000-507fffff
[ 31.027007] PREFETCH window: disabled.
[ 31.027052] PCI: Bridge: 0000:00:1e.0
[ 31.027095] IO window: 1000-1fff
[ 31.027140] MEM window: 50000000-500fffff
[ 31.027184] PREFETCH window: disabled.
[ 31.027246] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 31.027334] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 31.027349] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 31.027435] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 31.027451] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 31.027537] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 31.027552] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 31.027638] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 31.027652] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[ 31.027739] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 31.027748] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 31.027819] NET: Registered protocol family 2
[ 31.040181] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 31.040510] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 31.041444] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 31.042143] TCP: Hash tables configured (established 131072 bind 65536)
[ 31.042193] TCP reno registered
[ 31.045808] checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
[ 31.048307] Freeing initrd memory: 2000k freed
[ 31.050066] IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
[ 31.051776] fuse init (API version 7.8)
[ 31.052029] io scheduler noop registered
[ 31.052121] io scheduler cfq registered (default)
[ 31.052905] input: Power Button (FF) as /class/input/input0
[ 31.052953] ACPI: Power Button (FF) [PWRF]
[ 31.053121] input: Sleep Button (CM) as /class/input/input1
[ 31.053174] ACPI: Sleep Button (CM) [SLPB]
[ 31.053609] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 31.053804] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 31.053895] ACPI: Getting cpuindex for acpiid 0x3
[ 31.053944] ACPI: Getting cpuindex for acpiid 0x4
[ 31.060298] Real Time Clock Driver v1.12ac
[ 31.060450] hpet_resources: 0xfed00000 is busy
[ 31.060456] Linux agpgart interface v0.101 (c) Dave Jones
[ 31.060584] agpgart: Detected an Intel 965G Chipset.
[ 31.063093] agpgart: Detected 7676K stolen memory.
[ 31.075915] agpgart: AGP aperture is 512M @ 0x40000000
[ 31.076011] [drm] Initialized drm 1.1.0 20060810
[ 31.076078] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.076290] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 31.076338] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[ 31.076409] intelfb: Version 0.9.4
[ 31.076533] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[ 31.076770] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.077661] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 31.078009] Floppy drive(s): fd0 is 1.44M
[ 31.092438] FDC 0 is a National Semiconductor PC87306
[ 31.095086] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
[ 31.095941] loop: loaded (max 8 devices)
[ 31.095984] Intel(R) PRO/10GbE Network Driver - version 1.0.117-k2
[ 31.096032] Copyright (c) 1999-2006 Intel Corporation.
[ 31.096660] 8139too Fast Ethernet driver 0.9.28
[ 31.096726] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.097207] eth0: RealTek RTL8139 at 0xffffc2000000e000, 00:e0:4c:f0:a9:84, IRQ 21
[ 31.097274] eth0: Identified 8139 chip type 'RTL-8139C'
[ 31.097279] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 31.097328] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 31.097521] Probing IDE interface ide0...
[ 31.610694] Probing IDE interface ide1...
[ 32.124312] ahci 0000:00:1f.2: version 2.0
[ 32.124325] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 33.125036] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 33.125042] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 33.125113] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
[ 33.125320] ata1: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0x0 bmdma 0x0 irq 19
[ 33.125488] ata2: SATA max UDMA/133 cmd 0xFFFFC20000024180 ctl 0x0 bmdma 0x0 irq 19
[ 33.125625] ata3: DUMMY
[ 33.125734] ata4: DUMMY
[ 33.125877] ata5: SATA max UDMA/133 cmd 0xFFFFC20000024300 ctl 0x0 bmdma 0x0 irq 19
[ 33.126047] ata6: SATA max UDMA/133 cmd 0xFFFFC20000024380 ctl 0x0 bmdma 0x0 irq 19
[ 33.126124] scsi0 : ahci
[ 33.584213] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.585522] ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 31/32)
[ 33.586989] ata1.00: configured for UDMA/133
[ 33.587039] scsi1 : ahci
[ 33.889314] ata2: SATA link down (SStatus 0 SControl 300)
[ 33.889368] scsi2 : ahci
[ 33.889520] scsi3 : ahci
[ 33.889656] scsi4 : ahci
[ 34.192407] ata5: SATA link down (SStatus 0 SControl 300)
[ 34.192462] scsi5 : ahci
[ 34.495480] ata6: SATA link down (SStatus 0 SControl 300)
[ 34.495671] scsi 0:0:0:0: Direct-Access ATA ST380817AS 3.42 PQ: 0 ANSI: 5
[ 34.495990] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.496050] sda: Write Protect is off
[ 34.496093] sda: Mode Sense: 00 3a 00 00
[ 34.496116] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.496249] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 34.496309] sda: Write Protect is off
[ 34.496351] sda: Mode Sense: 00 3a 00 00
[ 34.496374] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.496466] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 34.550843] sd 0:0:0:0: Attached scsi disk sda
[ 34.551052] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.551222] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.551325] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 34.551399] ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2026 bmdma 0x2000 irq 17
[ 34.551460] scsi6 : pata_marvell
[ 34.551614] BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
[ 34.858084] ata7.00: ATAPI, max MWDMA2
[ 35.013190] ata7.00: configured for MWDMA2
[ 35.013501] scsi 6:0:0:0: CD-ROM HL-DT-ST CD-RW GCE-8400B 1.03 PQ: 0 ANSI: 5
[ 35.016392] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 35.016445] Uniform CD-ROM driver Revision: 3.20
[ 35.016644] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 35.016805] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 35.016962] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.017057] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 35.017060] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 35.017212] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 35.017335] ehci_hcd 0000:00:1a.7: debug port 1
[ 35.017383] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 35.017396] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x50325c00
[ 35.021323] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.021660] usb usb1: configuration #1 chosen from 1 choice
[ 35.021803] hub 1-0:1.0: USB hub found
[ 35.021853] hub 1-0:1.0: 4 ports detected
[ 35.122200] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.122295] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 35.122298] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 35.122440] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 35.122561] ehci_hcd 0000:00:1d.7: debug port 1
[ 35.122608] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 35.122617] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50325800
[ 35.126553] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 35.126849] usb usb2: configuration #1 chosen from 1 choice
[ 35.126992] hub 2-0:1.0: USB hub found
[ 35.127042] hub 2-0:1.0: 6 ports detected
[ 35.228192] USB Universal Host Controller Interface driver v3.0
[ 35.228357] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.228448] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 35.228451] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 35.228579] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 35.228675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
[ 35.229004] usb usb3: configuration #1 chosen from 1 choice
[ 35.229147] hub 3-0:1.0: USB hub found
[ 35.229197] hub 3-0:1.0: 2 ports detected
[ 35.330216] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 35.330308] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 35.330311] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 35.330452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 35.330546] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
[ 35.330866] usb usb4: configuration #1 chosen from 1 choice
[ 35.331016] hub 4-0:1.0: USB hub found
[ 35.331066] hub 4-0:1.0: 2 ports detected
[ 35.432238] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 35.432329] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.432332] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.432479] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 35.432569] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[ 35.432882] usb usb5: configuration #1 chosen from 1 choice
[ 35.433026] hub 5-0:1.0: USB hub found
[ 35.433076] hub 5-0:1.0: 2 ports detected
[ 35.534251] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 35.534342] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.534345] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.534489] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 35.534580] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[ 35.534905] usb usb6: configuration #1 chosen from 1 choice
[ 35.535045] hub 6-0:1.0: USB hub found
[ 35.535097] hub 6-0:1.0: 2 ports detected
[ 35.636320] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 35.636420] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 35.636423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 35.636585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 35.636675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[ 35.636995] usb usb7: configuration #1 chosen from 1 choice
[ 35.637149] hub 7-0:1.0: USB hub found
[ 35.637199] hub 7-0:1.0: 2 ports detected
[ 35.738468] usbcore: registered new interface driver cdc_acm
[ 35.738519] drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 35.738675] usbcore: registered new interface driver usblp
[ 35.738723] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 35.738775] Initializing USB Mass Storage driver...
[ 35.738893] usbcore: registered new interface driver usb-storage
[ 35.738941] USB Mass Storage support registered.
[ 35.739163] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 35.742158] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 35.742206] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 35.742393] mice: PS/2 mouse device common for all mice
[ 35.742801] i2c /dev entries driver
[ 35.743009] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21
[ 35.763620] EDAC MC: Ver: 2.0.1 Jan 1 2007
[ 35.764033] Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Wed Dec 20 08:11:48 2006 UTC).
[ 35.764808] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 35.764908] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 35.886596] ALSA device list:
[ 35.886644] #0: HDA Intel at 0x50320000 irq 22
[ 35.886718] nf_conntrack version 0.5.0 (3996 buckets, 31968 max)
[ 35.886890] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 35.928506] TCP cubic registered
[ 35.928567] NET: Registered protocol family 1
[ 35.928629] NET: Registered protocol family 17
[ 35.930585] NET: Registered protocol family 15
[ 36.463434] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[ 36.486984] input: AT Translated Set 2 keyboard as /class/input/input3
[ 36.538215] RAMDISK: ext2 filesystem found at block 0
[ 36.538269] RAMDISK: Loading 2000KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done.
[ 36.544842] VFS: Mounted root (ext2 filesystem).
[ 36.566730] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 36.566733] EXT3-fs: write access will be enabled during recovery.
[ 36.607168] kjournald starting. Commit interval 5 seconds
[ 36.607180] EXT3-fs: recovery complete.
[ 36.607634] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.607751] VFS: Mounted root (ext3 filesystem) readonly.
[ 36.607754] Trying to move old root to /initrd ... /initrd does not exist. Ignored.
[ 36.611497] Unmounting old root
[ 36.611708] Trying to free ramdisk memory ... okay
[ 36.612004] Freeing unused kernel memory: 232k freed
[ 41.326389] EXT3 FS on sda6, internal journal
[ 44.093173] kjournald starting. Commit interval 5 seconds
[ 44.093377] EXT3 FS on sda8, internal journal
[ 44.093381] EXT3-fs: mounted filesystem with ordered data mode.
[ 44.161756] Adding 1004016k swap on /dev/sda7. Priority:-1 extents:1 across:1004016k
[ 65.317093] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 330.980512] Machine check events logged
[ 434.698062] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 434.715801] ISO 9660 Extensions: RRIP_1991A
00:00.0 Host bridge: Intel Corporation Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation HECI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation Ethernet Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation LPC Interface Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation SATA Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation SMBus Controller (rev 02)
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Attachment:
config.gz
Description: GNU Zip compressed data