D-Link DFE-580TX adapter problems
From: Anders Karlsson
Date: Sun Jan 07 2007 - 08:40:26 EST
Hi there,
I am having problems getting a network adapter going. I should see
eth1-eth4 from this adapter, but they do not show up with 'ifconfig -a'.
'alta-diag' and 'lspci' show the four NICs, which is what confuses me. I
even added some printk's in sundance.c to find out what happens, and as
far as I can see, the NICs get enabled - so why don't they show up for
ifconfig? I've tried both 2.6.19.1 (SMP) and 2.6.20-rc3 (both UP and
SMP) in addition to the 2.6.15-27 kernel of Ubuntu 6.06.
I have attached outputs from 'alta-diag', 'dmidecode' and 'lspci -vvv'
in the hope that someone might be able to give me a hint at what is
going wrong. I have searched the LKML archive and Googled and not found
anything related. :-/
Any hints or help appreciated.
--
Anders Karlsson <trudheim@xxxxxxxxx>
alta-diag.c:v2.04 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
Index #1: Found a Sundance Technology Alta adapter at 0x8800.
Station address 00:05:5d:e6:3e:1d.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
Index #2: Found a Sundance Technology Alta adapter at 0x8400.
Station address 00:05:5d:e6:3e:1e.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
Index #3: Found a Sundance Technology Alta adapter at 0x8000.
Station address 00:05:5d:e6:3e:1f.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
Index #4: Found a Sundance Technology Alta adapter at 0x7800.
Station address 00:05:5d:e6:3e:20.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0100: Link status changed
alta-diag.c:v2.04 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
Index #1: Found a Sundance Technology Alta adapter at 0x8800.
Station address 00:05:5d:e6:3e:1d.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
EEPROM address length 8, 256 words.
EEPROM Subsystem IDs, Vendor 1186 Device 1012.
EEPROM Station address is 00:05:5d:e6:3e:1d.
Configuration 2afc, ASIC Control c063.
Checksum 6dc1
Index #2: Found a Sundance Technology Alta adapter at 0x8400.
Station address 00:05:5d:e6:3e:1e.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
EEPROM address length 8, 256 words.
EEPROM Subsystem IDs, Vendor 1186 Device 1012.
EEPROM Station address is 00:05:5d:e6:3e:1e.
Configuration 2afc, ASIC Control c063.
Checksum 954d
Index #3: Found a Sundance Technology Alta adapter at 0x8000.
Station address 00:05:5d:e6:3e:1f.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
EEPROM address length 8, 256 words.
EEPROM Subsystem IDs, Vendor 1186 Device 1012.
EEPROM Station address is 00:05:5d:e6:3e:1f.
Configuration 2afc, ASIC Control c063.
Checksum c2c9
Index #4: Found a Sundance Technology Alta adapter at 0x7800.
Station address 00:05:5d:e6:3e:20.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0100: Link status changed
EEPROM address length 8, 256 words.
EEPROM Subsystem IDs, Vendor 1186 Device 1012.
EEPROM Station address is 00:05:5d:e6:3e:20.
Configuration 2afc, ASIC Control c063.
Checksum f37d
alta-diag.c:v2.04 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
Index #1: Found a Sundance Technology Alta adapter at 0x8800.
Station address 00:05:5d:e6:3e:1d.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
MII PHY found at address 0, status 0x7809.
MII PHY found at address 1, status 0x7809.
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY #1 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
libmii.c:v2.11 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1100: Auto-negotiation enabled.
Basic mode status register 0x7809 ... 7809.
Link status: not established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation not complete.
Vendor ID is 00:08:85:--:--:--, model 35 rev. 0.
Vendor/Part: Alta/Kendin Sundance.
I'm advertising 01e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 0000:.
Negotiation did not complete.
Index #2: Found a Sundance Technology Alta adapter at 0x8400.
Station address 00:05:5d:e6:3e:1e.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
MII PHY found at address 0, status 0x7809.
MII PHY found at address 1, status 0x7809.
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY #1 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
libmii.c:v2.11 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1100: Auto-negotiation enabled.
Basic mode status register 0x7809 ... 7809.
Link status: not established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation not complete.
Vendor ID is 00:08:85:--:--:--, model 35 rev. 0.
Vendor/Part: Alta/Kendin Sundance.
I'm advertising 01e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 0000:.
Negotiation did not complete.
Index #3: Found a Sundance Technology Alta adapter at 0x8000.
Station address 00:05:5d:e6:3e:1f.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0000: No interrupts pending.
MII PHY found at address 0, status 0x7809.
MII PHY found at address 1, status 0x7809.
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY #1 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
libmii.c:v2.11 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
MII PHY #0 transceiver registers:
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
1100 7809 0022 1630 01e1 0000 0004 2001
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1100: Auto-negotiation enabled.
Basic mode status register 0x7809 ... 7809.
Link status: not established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation not complete.
Vendor ID is 00:08:85:--:--:--, model 35 rev. 0.
Vendor/Part: Alta/Kendin Sundance.
I'm advertising 01e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 0000:.
Negotiation did not complete.
Index #4: Found a Sundance Technology Alta adapter at 0x7800.
Station address 00:05:5d:e6:3e:20.
Receive mode is 0x00: Uninitialized/disabled.
MAC mode is 0000: half duplex.
Tx status 00, threshold 8188.
Interrupt status is 0100: Link status changed
MII PHY found at address 0, status 0x782d.
MII PHY found at address 1, status 0x782d.
MII PHY #0 transceiver registers:
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
0000 0000 0000 0000 0000 0000 0000 0000.
MII PHY #1 transceiver registers:
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
0000 0000 0000 0000 0000 0000 0000 0000.
libmii.c:v2.11 2/28/2005 Donald Becker (becker@xxxxxxxxx)
http://www.scyld.com/diag/index.html
MII PHY #0 transceiver registers:
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
1100 782d 0022 1630 01e1 45e1 0007 2001
0000 0000 0000 0000 0000 0000 0000 0000.
Basic mode control register 0x1100: Auto-negotiation enabled.
Basic mode status register 0x782d ... 782d.
Link status: established.
Capable of 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Able to perform Auto-negotiation, negotiation complete.
Vendor ID is 00:08:85:--:--:--, model 35 rev. 0.
Vendor/Part: Alta/Kendin Sundance.
I'm advertising 01e1: 100baseTx-FD 100baseTx 10baseT-FD 10baseT
Advertising no additional info pages.
IEEE 802.3 CSMA/CD protocol.
Link partner capability is 45e1: Flow-control 100baseTx-FD 100baseTx 10baseT-FD 10baseT.
Negotiation completed.
# dmidecode 2.7
SMBIOS 2.3 present.
54 structures occupying 1448 bytes.
Table at 0x000F38A0.
Handle 0x0000, DMI type 0, 20 bytes.
BIOS Information
Vendor: Award Software, Inc.
Version: ASUS A7V600 ACPI BIOS Revision 1008
Release Date: 09/02/2004
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 256 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
Handle 0x0001, DMI type 1, 25 bytes.
System Information
Manufacturer: System Manufacturer
Product Name: System Name
Version: System Version
Serial Number: SYS-1234567890
UUID: Not Settable
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes.
Base Board Information
Manufacturer: ASUSTeK Computer INC.
Product Name: A7V600
Version: REV 1.xx
Serial Number: xxxxxxxxxxx
Handle 0x0003, DMI type 3, 17 bytes.
Chassis Information
Manufacturer: Chassis Manufacture
Type: Tower
Lock: Not Present
Version: Chassis Version
Serial Number: Chassis Serial Number
Asset Tag: Asset-1234567890
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: Unknown
OEM Information: 0x00000002
Handle 0x0004, DMI type 4, 32 bytes.
Processor Information
Socket Designation: SOCKET A
Type: Central Processor
Family: Other
Manufacturer: AuthenticAMD
ID: A0 06 00 00 FF FB 83 03
Version: AMD Sempron(TM) 3000+
Voltage: 1.5 V
External Clock: 166 MHz
Max Speed: 2250 MHz
Current Speed: 2000 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0009
L2 Cache Handle: 0x000A
L3 Cache Handle: Not Provided
Handle 0x0005, DMI type 5, 22 bytes.
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
Other
Supported Interleave: Unknown
Current Interleave: Unknown
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 3072 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
ECC
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 3
0x0006
0x0007
0x0008
Enabled Error Correcting Capabilities:
Unknown
Handle 0x0006, DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: DIMM 1
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: DIMM 2
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 6, 12 bytes.
Memory Module Information
Socket Designation: DIMM 3
Bank Connections: 4 5
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 1024 MB (Double-bank Connection)
Enabled Size: 1024 MB (Double-bank Connection)
Error Status: OK
Handle 0x0009, DMI type 7, 19 bytes.
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Pipeline Burst
Synchronous
Installed SRAM Type: Pipeline Burst Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Data
Associativity: 4-way Set-associative
Handle 0x000A, DMI type 7, 19 bytes.
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 KB
Maximum Size: 8192 KB
Supported SRAM Types:
Pipeline Burst
Synchronous
Installed SRAM Type: Pipeline Burst Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Data
Associativity: 4-way Set-associative
Handle 0x000B, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: PRIMARY IDE/HDD
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: None
Handle 0x000C, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: SECONDARY IDE/HDD
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: None
Handle 0x000D, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: None
Handle 0x000E, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000F, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0011, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0012, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0013, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0014, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB7
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0015, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB8
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0016, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: PS/2 Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x0017, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0018, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Parallel Port
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x0019, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Serial Port 1
External Connector Type: DB-9 male
Port Type: Serial Port 16550 Compatible
Handle 0x001A, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Serial Port 2
External Connector Type: DB-9 male
Port Type: Serial Port 16550 Compatible
Handle 0x001B, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Joystick Port
External Connector Type: DB-15 female
Port Type: Joystick Port
Handle 0x001C, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: MIDI Port
External Connector Type: DB-15 female
Port Type: MIDI Port
Handle 0x001D, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Line In Jack
External Connector Type: Mini Jack (headphones)
Port Type: Audio Port
Handle 0x001E, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Lan
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x001F, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Serial ATA1
External Connector Type: Other
Port Type: None
Handle 0x0020, DMI type 8, 9 bytes.
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Serial ATA2
External Connector Type: Other
Port Type: None
Handle 0x0021, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0022, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 2
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0023, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 3
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 3
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0024, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 4
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 4
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0025, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 5
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 5
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0026, DMI type 9, 13 bytes.
System Slot Information
Designation: PCI 6
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 6
Characteristics:
5.0 V is provided
3.3 V is provided
PME signal is supported
Handle 0x0027, DMI type 9, 13 bytes.
System Slot Information
Designation: AGP
Type: 32-bit AGP 8x
Current Usage: In Use
Length: Short
Characteristics:
3.3 V is provided
Handle 0x0028, DMI type 11, 5 bytes.
OEM Strings
String 1: 0
String 2: 0
Handle 0x0029, DMI type 13, 22 bytes.
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x002A, DMI type 14, 14 bytes.
Group Associations
Name: Cpu Module
Items: 3
0x0004 (Processor)
0x0009 (Cache)
0x000A (Cache)
Handle 0x002B, DMI type 14, 29 bytes.
Group Associations
Name: Memory Module Set
Items: 8
0x0029 (Physical Memory Array)
0x002A (Memory Device)
0x002E (Memory Device Mapped Address)
0x002B (Memory Device)
0x002F (Memory Device Mapped Address)
0x002C (Memory Device)
0x0030 (Memory Device Mapped Address)
0x002D (Memory Array Mapped Address)
Handle 0x002C, DMI type 16, 15 bytes.
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 3
Handle 0x002D, DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DDR 1
Bank Locator: Not Specified
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x002E, DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 2
Locator: DDR 2
Bank Locator: Not Specified
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x002F, DMI type 17, 23 bytes.
Memory Device
Array Handle: 0x002C
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: 3
Locator: DDR 3
Bank Locator: Not Specified
Type: DRAM
Type Detail: Synchronous
Speed: Unknown
Handle 0x0030, DMI type 19, 15 bytes.
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x0029
Partition Width: 0
Handle 0x0031, DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002D
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 1
Handle 0x0032, DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 2
Handle 0x0033, DMI type 20, 19 bytes.
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x002F
Memory Array Mapped Address Handle: 0x002D
Partition Row Position: 3
Handle 0x0034, DMI type 32, 11 bytes.
System Boot Information
Status: No errors detected
Handle 0x0035, DMI type 127, 4 bytes.
End Of Table
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8,x@
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: de800000-dfdfffff
Prefetchable memory behind bridge: e0000000-fbffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
Subsystem: ASUSTeK Computer Inc. P4P800/K8V Deluxe motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at b800 [size=256]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
0000:00:0a.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02)
Subsystem: Silicon Image, Inc. Winic W-680 (Silicon Image 680 based)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x01 (4 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a400 [size=4]
Region 4: I/O ports at a000 [size=16]
Region 5: Memory at dd800000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 88100000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:00:0d.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07)
Subsystem: LSI Logic / Symbios Logic LSI21002 PCI to Dual Channel Ultra2 SCSI host adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at dd000000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at dc800000 (64-bit, non-prefetchable) [size=8K]
Expansion ROM at 88180000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0d.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07)
Subsystem: LSI Logic / Symbios Logic LSI21002 PCI to Dual Channel Ultra2 SCSI host adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 0x10 (64 bytes)
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at dc000000 (64-bit, non-prefetchable) [size=1K]
Region 3: Memory at db800000 (64-bit, non-prefetchable) [size=8K]
Expansion ROM at 88190000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0e.0 PCI bridge: Intel Corporation 21152 PCI-to-PCI Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 00007000-00008fff
Memory behind bridge: 88000000-880fffff
Prefetchable memory behind bridge: 00000000dfe00000-00000000dfe00000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 6800 [size=8]
Region 1: I/O ports at 6400 [size=4]
Region 2: I/O ports at 6000 [size=8]
Region 3: I/O ports at 5800 [size=4]
Region 4: I/O ports at 5400 [size=16]
Region 5: I/O ports at 5000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 17
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 4800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 4400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 4000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x10 (64 bytes)
Interrupt: pin C routed to IRQ 19
Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe motherboard (ADI AD1980 codec [SoundMAX])
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at e500 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01) (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7c26
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
Subsystem: PC Partner Limited: Unknown device 7c27
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 0x08 (32 bytes)
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at de800000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:02:04.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12)
Subsystem: D-Link System Inc DFE-580TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 8800 [size=128]
Expansion ROM at dfe00000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:05.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12)
Subsystem: D-Link System Inc DFE-580TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 8400 [size=128]
Expansion ROM at dfe10000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:06.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12)
Subsystem: D-Link System Inc DFE-580TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 8000 [size=128]
Expansion ROM at dfe20000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0000:02:07.0 Ethernet controller: D-Link System Inc DL10050 Sundance Ethernet (rev 12)
Subsystem: D-Link System Inc DFE-580TX
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 7800 [size=128]
Expansion ROM at dfe30000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux lenin 2.6.20-rc3 #0 SMP Wed Jan 3 13:51:02 GMT 2007 i686 GNU/Linux
Gnu C 4.0.3
Gnu make 3.81beta4
binutils 2.16.91
util-linux 2.12r
mount 2.12r
module-init-tools 3.2.2
e2fsprogs 1.38
jfsutils 1.1.8
reiserfsprogs 3.6.19
reiser4progs 1.0.5
xfsprogs 2.7.7
pcmciautils 012
pcmcia-cs 3.2.8
quota-tools 3.13.
PPP 2.4.4b1
nfs-utils 1.0.7
Linux C Library 2.3.6
Dynamic linker (ldd) 2.3.6
Procps 3.2.6
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.93
udev 079
wireless-tools 28
Modules Loaded nls_cp437 isofs udf radeon drm radeonfb i2c_algo_bit fb_ddc fbcon tileblit font bitblit softcursor binfmt_misc rfcomm l2cap pktcdvd nfsd exportfs lockd sunrpc autofs4 capability commoncap cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_ondemand freq_table cpufreq_conservative video sbs i2c_ec dock button battery container ac asus_acpi backlight ipv6 quota_v2 snd_seq_dummy snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq ipt_MASQUERADE ipt_REJECT ipt_LOG xt_tcpudp xt_state xt_multiport iptable_filter iptable_nat nf_nat ip_tables x_tables nf_conntrack_ipv4 nf_conntrack nfnetlink hci_usb bluetooth usblp snd_via82xx_modem snd_pcm_oss snd_mixer_oss snd_via82xx gameport snd_ac97_codec ac97_bus snd_mpu401_uart snd_rawmidi snd_seq_device snd_pcm snd_timer serio_raw sundance mii snd floppy soundcore snd_page_alloc sk98lin pata_sil680 ata_generic pata_via shpchp pci_hotplug skge via_agp agpgart sg evdev it87 hwmon_vid eeprom i2c_isa i2c_viapro i2c_core softdog psmouse parport_pc lp parport ext3 jbd mbcache dm_mirror ide_generic ehci_hcd uhci_hcd usbcore generic sd_mod sata_via sym53c8xx scsi_transport_spi ide_cd cdrom ide_disk thermal processor fan raid1 md_mod dm_mod via82cxxx siimage
Attachment:
smime.p7s
Description: S/MIME cryptographic signature