Re: [PATCH] libata-sff: Don't call bmdma_stop on non DMA capablecontrollers

[Jeff Garzik]

Alan wrote:
> Fixes bogus accesses to ports 0-15 with a non DMA capable controller.
> This I think should go in for 2.6.20

applied to #upstream-fixes, but it's a hack based on a misunderstanding. 
 See comments below for further work needed.


> Arguably it shouldn't be called for PIO commands at all but thats a
> matter for Jeff to decide 

You are getting misled by the function name.

ata_bmdma_post_internal_cmd() is the common ->post_internal_cmd() hook 
for BMDMA-like (SFF-like) controllers.  ->post_internal_cmd() hook will 
always be called, for all commands, when present.

For PIO-only controllers, simply delete the post_internal_cmd hook from 
that specific driver's ata_port_operations.  (assuming no other cleanup 
is needed)

For other SFF controllers, perhaps ata_bmdma_post_internal_cmd() should 
be revised to check the taskfile protocol (PIO, DMA, ...)?

I leave that up to your judgement, to figure out what's best.  I 
certainly AGREE that an unconditional ata_bmdma_stop() for all commands, 
for all taskfile protocols, sounds wrong.

	Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/