/* * File: drivers/serial/bfin_5xx.c * Based on: Based on drivers/serial/sa1100.c * Author: Aubrey Li * * Created: * Description: Driver for blackfin 5xx serial ports * * Rev: $Id: bfin_5xx.c 2704 2007-01-30 09:53:59Z aubrey $ * * Modified: * Copyright 2006 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see the file COPYING, or write * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_SERIAL_BFIN_DMA #include #include #include #include #endif /* We've been assigned a range on the "Low-density serial ports" major */ #define SERIAL_BFIN_MAJOR TTY_MAJOR #define MINOR_START 64 /* * Setup for console. Argument comes from the menuconfig */ #if defined(CONFIG_BAUD_9600) #define CONSOLE_BAUD_RATE 9600 #elif defined(CONFIG_BAUD_19200) #define CONSOLE_BAUD_RATE 19200 #elif defined(CONFIG_BAUD_38400) #define CONSOLE_BAUD_RATE 38400 #elif defined(CONFIG_BAUD_57600) #define CONSOLE_BAUD_RATE 57600 #elif defined(CONFIG_BAUD_115200) #define CONSOLE_BAUD_RATE 115200 #endif #define DMA_RX_XCOUNT 512 #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES 5 #ifdef CONFIG_SERIAL_BFIN_DMA wait_queue_head_t bfin_serial_tx_queue[NR_PORTS]; static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); #else static void bfin_serial_do_work(void *); static void bfin_serial_tx_chars(struct bfin_serial_port *uart); static void local_put_char(struct bfin_serial_port *uart, char ch); #endif static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static int bfin_serial_calc_baud(unsigned int uartclk, unsigned int baud); /* * interrupts are disabled on entry */ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); #else unsigned short ier; ier = UART_GET_IER(uart); ier &= ~ETBEI; UART_PUT_IER(uart, ier); #endif } /* * port is locked and interrupts are disabled */ static void bfin_serial_start_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA bfin_serial_dma_tx_chars(uart); #else unsigned short ier; ier = UART_GET_IER(uart); ier |= ETBEI; UART_PUT_IER(uart, ier); bfin_serial_tx_chars(uart); #endif } /* * Interrupts are enabled */ static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned short ier; ier = UART_GET_IER(uart); ier &= ERBFI; UART_PUT_IER(uart, ier); } /* * Set the modem control timer to fire immediately. */ static void bfin_serial_enable_ms(struct uart_port *port) { } #ifdef CONFIG_SERIAL_BFIN_PIO static void local_put_char(struct bfin_serial_port *uart, char ch) { unsigned short status; int flags = 0; local_irq_save(flags); do { status = UART_GET_LSR(uart); } while (!(status & THRE)); UART_PUT_CHAR(uart, ch); local_irq_restore(flags); } static void bfin_serial_rx_chars(struct bfin_serial_port *uart) { struct tty_struct *tty = uart->port.info?uart->port.info->tty:0; unsigned int status, ch, flg; #if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) static int in_break = 0; #endif status = UART_GET_LSR(uart); ch = UART_GET_CHAR(uart); uart->port.icount.rx++; #if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) if (in_break) { if (ch != 0) { in_break = 0; ch = UART_GET_CHAR(uart); } return; } #endif if (status & BI) { #if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533) in_break = 1; #endif uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto ignore_char; flg = TTY_BREAK; } else if (status & PE) { flg = TTY_PARITY; uart->port.icount.parity++; } else if (status & OE) { flg = TTY_OVERRUN; uart->port.icount.overrun++; } else if (status & FE) { flg = TTY_FRAME; uart->port.icount.frame++; } else flg = TTY_NORMAL; if (uart_handle_sysrq_char(&uart->port, ch)) goto ignore_char; if (tty) uart_insert_char(&uart->port, status, 2, ch, flg); ignore_char: if (tty) tty_flip_buffer_push(tty); } static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; return; } /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { bfin_serial_stop_tx(&uart->port); return; } local_put_char(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uart->port.icount.tx++; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); if (uart_circ_empty(xmit)) bfin_serial_stop_tx(&uart->port); } static irqreturn_t bfin_serial_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short status; spin_lock(&uart->port.lock); status = UART_GET_IIR(uart); do { if ((status & IIR_STATUS) == IIR_TX_READY) bfin_serial_tx_chars(uart); if ((status & IIR_STATUS) == IIR_RX_READY) bfin_serial_rx_chars(uart); status = UART_GET_IIR(uart); } while (status &(IIR_TX_READY | IIR_RX_READY)); spin_unlock(&uart->port.lock); return IRQ_HANDLED; } static void bfin_serial_do_work(void *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; bfin_serial_mctrl_check(uart); } #endif #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; unsigned short ier; int flags = 0; if (!uart->tx_done) return; uart->tx_done = 0; if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; uart->tx_done = 1; return; } /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { bfin_serial_stop_tx(&uart->port); uart->tx_done = 1; return; } local_irq_save(flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); set_dma_config(uart->tx_dma_channel, set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, INTR_ON_BUF, DIMENSION_LINEAR, DATA_SIZE_8)); set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); set_dma_x_count(uart->tx_dma_channel, uart->tx_count); set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); ier = UART_GET_IER(uart); ier |= ETBEI; UART_PUT_IER(uart, ier); local_irq_restore(flags); } static void bfin_serial_dma_rx_chars(struct bfin_serial_port * uart) { struct tty_struct *tty = uart->port.info->tty; int i, flg, status; status = UART_GET_LSR(uart); uart->port.icount.rx += CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, UART_XMIT_SIZE);; if (status & BI) { uart->port.icount.brk++; if (uart_handle_break(&uart->port)) goto dma_ignore_char; flg = TTY_BREAK; } else if (status & PE) { flg = TTY_PARITY; uart->port.icount.parity++; } else if (status & OE) { flg = TTY_OVERRUN; uart->port.icount.overrun++; } else if (status & FE) { flg = TTY_FRAME; uart->port.icount.frame++; } else flg = TTY_NORMAL; for (i = uart->rx_dma_buf.head; i < uart->rx_dma_buf.tail; i++) { if (uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) goto dma_ignore_char; uart_insert_char(&uart->port, status, 2, uart->rx_dma_buf.buf[i], flg); } dma_ignore_char: tty_flip_buffer_push(tty); } void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) { int x_pos, pos; int flags = 0; bfin_serial_dma_tx_chars(uart); local_irq_save(flags); x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); if (x_pos == DMA_RX_XCOUNT) x_pos = 0; pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; if (pos>uart->rx_dma_buf.tail) { uart->rx_dma_buf.tail = pos; bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.head = uart->rx_dma_buf.tail; } local_irq_restore(flags); uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); } static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; struct circ_buf *xmit = &uart->port.info->xmit; unsigned short ier; spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { clear_dma_irqstat(uart->tx_dma_channel); disable_dma(uart->tx_dma_channel); ier = UART_GET_IER(uart); ier &= ~ETBEI; UART_PUT_IER(uart, ier); xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1); uart->port.icount.tx+=uart->tx_count; if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); if (uart_circ_empty(xmit)) bfin_serial_stop_tx(&uart->port); uart->tx_done = 1; } spin_unlock(&uart->port.lock); return IRQ_HANDLED; } static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; unsigned short irqstat; uart->rx_dma_nrows++; if (uart->rx_dma_nrows == DMA_RX_YCOUNT) { uart->rx_dma_nrows = 0; uart->rx_dma_buf.tail = DMA_RX_XCOUNT*DMA_RX_YCOUNT; bfin_serial_dma_rx_chars(uart); uart->rx_dma_buf.head = uart->rx_dma_buf.tail = 0; } spin_lock(&uart->port.lock); irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); clear_dma_irqstat(uart->rx_dma_channel); spin_unlock(&uart->port.lock); return IRQ_HANDLED; } #endif /* * Return TIOCSER_TEMT when transmitter is not busy. */ static unsigned int bfin_serial_tx_empty(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned short lsr; lsr = UART_GET_LSR(uart); if (lsr & THRE) return TIOCSER_TEMT; else return 0; } static unsigned int bfin_serial_get_mctrl(struct uart_port *port) { /* Hardware flow control is only supported on the first port */ #ifdef CONFIG_SERIAL_BFIN_CTSRTS if ((bfin_read16(CTS_PORT) & (1 << CTS_PIN)) && (port->line == 0)) return TIOCM_DSR | TIOCM_CAR; else #endif return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; } static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) { #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (mctrl & TIOCM_RTS) bfin_write16(RTS_PORT, bfin_read16(RTS_PORT) & (~1 << RTS_PIN)); else bfin_write16(RTS_PORT, bfin_read16(RTS_PORT) | (1 << RTS_PIN)); #endif } /* * Handle any change of modem status signal since we were last called. */ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) { #ifdef CONFIG_SERIAL_BFIN_CTSRTS unsigned int status; # ifdef CONFIG_SERIAL_BFIN_DMA struct uart_info *info = uart->port.info; struct tty_struct *tty = info->tty; status = bfin_serial_get_mctrl(&uart->port); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; } else { tty->hw_stopped = 0; } # else status = bfin_serial_get_mctrl(&uart->port); uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) schedule_work(&uart->cts_workqueue); # endif #endif } /* * Interrupts are always disabled. */ static void bfin_serial_break_ctl(struct uart_port *port, int break_state) { } static int bfin_serial_startup(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA dma_addr_t dma_handle; if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); return -EBUSY; } if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); free_dma(uart->rx_dma_channel); return -EBUSY; } set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); uart->rx_dma_buf.head = 0; uart->rx_dma_buf.tail = 0; uart->rx_dma_nrows = 0; set_dma_config(uart->rx_dma_channel, set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, INTR_ON_ROW, DIMENSION_2D, DATA_SIZE_8)); set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); set_dma_x_modify(uart->rx_dma_channel, 1); set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); set_dma_y_modify(uart->rx_dma_channel, 1); set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); enable_dma(uart->rx_dma_channel); uart->rx_dma_timer.data = (unsigned long)(uart); uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; add_timer(&(uart->rx_dma_timer)); #else if (request_irq (uart->port.irq, bfin_serial_int, SA_INTERRUPT | SA_SHIRQ, "BFIN_UART0_RX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); return -EBUSY; } if (request_irq (uart->port.irq+1, bfin_serial_int, SA_INTERRUPT | SA_SHIRQ, "BFIN_UART0_TX", uart)) { printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); free_irq(uart->port.irq, uart); return -EBUSY; } #endif UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); return 0; } static void bfin_serial_shutdown(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; #ifdef CONFIG_SERIAL_BFIN_DMA disable_dma(uart->tx_dma_channel); free_dma(uart->tx_dma_channel); disable_dma(uart->rx_dma_channel); free_dma(uart->rx_dma_channel); del_timer(&(uart->rx_dma_timer)); #else free_irq(uart->port.irq, uart); free_irq(uart->port.irq+1, uart); #endif } static void bfin_serial_set_termios(struct uart_port *port, struct termios *termios, struct termios *old) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; unsigned long flags; unsigned int baud, quot; unsigned short val, ier; baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); quot = bfin_serial_calc_baud(port->uartclk, baud); spin_lock_irqsave(&uart->port.lock, flags); /* Disable UART */ ier = UART_GET_IER(uart); UART_PUT_IER(uart, 0); /* Set DLAB in LCR to Access DLL and DLH */ val = UART_GET_LCR(uart); val |= DLAB; UART_PUT_LCR(uart, val); __builtin_bfin_ssync(); UART_PUT_DLL(uart, quot & 0xFF); __builtin_bfin_ssync(); UART_PUT_DLH(uart, (quot >> 8) & 0xFF); __builtin_bfin_ssync(); /* Clear DLAB in LCR to Access THR RBR IER */ val = UART_GET_LCR(uart); val &= ~DLAB; UART_PUT_LCR(uart, val); __builtin_bfin_ssync(); /* Enable UART */ UART_PUT_IER(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; UART_PUT_GCTL(uart, val); spin_unlock_irqrestore(&uart->port.lock, flags); } static const char *bfin_serial_type(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; } /* * Release the memory region(s) being used by 'port'. */ static void bfin_serial_release_port(struct uart_port *port) { } /* * Request the memory region(s) being used by 'port'. */ static int bfin_serial_request_port(struct uart_port *port) { return 0; } /* * Configure/autoconfigure the port. */ static void bfin_serial_config_port(struct uart_port *port, int flags) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; if (flags & UART_CONFIG_TYPE && bfin_serial_request_port(&uart->port) == 0) uart->port.type = PORT_BFIN; } /* * Verify the new serial_struct (for TIOCSSERIAL). * The only change we allow are to the flags and type, and * even then only between PORT_BFIN and PORT_UNKNOWN */ static int bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) { return 0; } static struct uart_ops bfin_serial_pops = { .tx_empty = bfin_serial_tx_empty, .set_mctrl = bfin_serial_set_mctrl, .get_mctrl = bfin_serial_get_mctrl, .stop_tx = bfin_serial_stop_tx, .start_tx = bfin_serial_start_tx, .stop_rx = bfin_serial_stop_rx, .enable_ms = bfin_serial_enable_ms, .break_ctl = bfin_serial_break_ctl, .startup = bfin_serial_startup, .shutdown = bfin_serial_shutdown, .set_termios = bfin_serial_set_termios, .type = bfin_serial_type, .release_port = bfin_serial_release_port, .request_port = bfin_serial_request_port, .config_port = bfin_serial_config_port, .verify_port = bfin_serial_verify_port, }; static int bfin_serial_calc_baud(unsigned int uartclk, unsigned int baud) { int quot; quot = uartclk / (baud * 8); if ((quot & 0x1) == 1) { quot++; } return quot/2; } static void __init bfin_serial_init_ports(void) { static int first = 1; int i; unsigned short val; int quot; if (!first) return; first = 0; bfin_serial_hw_init(); for (i = 0; i < NR_PORTS; i++) { bfin_serial_ports[i].port.uartclk = get_sclk(); bfin_serial_ports[i].port.ops = &bfin_serial_pops; bfin_serial_ports[i].port.line = i; bfin_serial_ports[i].port.iotype = UPIO_MEM; bfin_serial_ports[i].port.membase = (void __iomem *)uart_base_addr[i]; bfin_serial_ports[i].port.mapbase = uart_base_addr[i]; bfin_serial_ports[i].port.irq = uart_irq[i]; bfin_serial_ports[i].port.flags = UPF_BOOT_AUTOCONF; #ifdef CONFIG_SERIAL_BFIN_DMA bfin_serial_ports[i].tx_done = 1; bfin_serial_ports[i].tx_count = 0; bfin_serial_ports[i].tx_dma_channel = uart_tx_dma_channel[i]; bfin_serial_ports[i].rx_dma_channel = uart_rx_dma_channel[i]; init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #else INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work, &bfin_serial_ports[i]); #endif quot = bfin_serial_calc_baud(bfin_serial_ports[i].port.uartclk, CONSOLE_BAUD_RATE); /* Disable UART */ UART_PUT_GCTL(&bfin_serial_ports[i], 0); /* Set DLAB in LCR to Access DLL and DLH */ val = UART_GET_LCR(&bfin_serial_ports[i]); val |= DLAB; UART_PUT_LCR(&bfin_serial_ports[i], val); UART_PUT_DLL(&bfin_serial_ports[i], quot & 0xFF); UART_PUT_DLH(&bfin_serial_ports[i], (quot >> 8) & 0xFF); /* Clear DLAB in LCR to Access THR RBR IER */ val = UART_GET_LCR(&bfin_serial_ports[i]); val &= ~DLAB; UART_PUT_LCR(&bfin_serial_ports[i], val); /* Set LCR to Word Lengh 8-bit word select */ val = WLS(8); UART_PUT_LCR(&bfin_serial_ports[i], val); /* Enable UART */ val = UART_GET_GCTL(&bfin_serial_ports[i]); val |= UCEN; UART_PUT_GCTL(&bfin_serial_ports[i], val); } } #ifdef CONFIG_SERIAL_BFIN_CONSOLE /* * Interrupts are disabled on entering */ static void bfin_serial_console_write(struct console *co, const char *s, unsigned int count) { struct bfin_serial_port *uart = &bfin_serial_ports[co->index]; int flags = 0; unsigned short status, tmp; int i; local_irq_save(flags); for (i = 0; i < count; i++) { do { status = UART_GET_LSR(uart); } while (!(status & THRE)); tmp = UART_GET_LCR(uart); tmp &= ~DLAB; UART_PUT_LCR(uart, tmp); UART_PUT_CHAR(uart, s[i]); if (s[i] == '\n') { do { status = UART_GET_LSR(uart); } while(!(status & THRE)); UART_PUT_CHAR(uart, '\r'); } } local_irq_restore(flags); } /* * If the port was already initialised (eg, by a boot loader), * try to determine the current setup. */ static void __init bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, int *parity, int *bits) { unsigned short status; status = UART_GET_IER(uart) & (ERBFI | ETBEI); if (status == (ERBFI | ETBEI)) { /* ok, the port was enabled */ unsigned short lcr, val; unsigned short dlh, dll; lcr = UART_GET_LCR(uart); *parity = 'n'; if (lcr & PEN) { if (lcr & EPS) *parity = 'e'; else *parity = 'o'; } switch (lcr & 0x03) { case 0: *bits = 5; break; case 1: *bits = 6; break; case 2: *bits = 7; break; case 3: *bits = 8; break; } /* Set DLAB in LCR to Access DLL and DLH */ val = UART_GET_LCR(uart); val |= DLAB; UART_PUT_LCR(uart, val); dll = UART_GET_DLL(uart); dlh = UART_GET_DLH(uart); /* Clear DLAB in LCR to Access THR RBR IER */ val = UART_GET_LCR(uart); val &= ~DLAB; UART_PUT_LCR(uart, val); *baud = get_sclk() / (16*(dll | dlh << 8)); } pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits); } static int __init bfin_serial_console_setup(struct console *co, char *options) { struct bfin_serial_port *uart; int baud = CONSOLE_BAUD_RATE; int bits = 8; int parity = 'n'; #ifdef CONFIG_SERIAL_BFIN_CTSRTS int flow = 'r'; #else int flow = 'n'; #endif /* * Check whether an invalid uart number has been specified, and * if so, search for the first available port that does have * console support. */ if (co->index == -1 || co->index >= NR_PORTS) co->index = 0; uart = &bfin_serial_ports[co->index]; if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else bfin_serial_console_get_options(uart, &baud, &parity, &bits); return uart_set_options(&uart->port, co, baud, parity, bits, flow); } static struct uart_driver bfin_serial_reg; static struct console bfin_serial_console = { .name = "ttyS", .write = bfin_serial_console_write, .device = uart_console_device, .setup = bfin_serial_console_setup, .flags = CON_PRINTBUFFER, .index = -1, .data = &bfin_serial_reg, }; static int __init bfin_serial_rs_console_init(void) { bfin_serial_init_ports(); register_console(&bfin_serial_console); return 0; } console_initcall(bfin_serial_rs_console_init); #define BFIN_SERIAL_CONSOLE &bfin_serial_console #else #define BFIN_SERIAL_CONSOLE NULL #endif static struct uart_driver bfin_serial_reg = { .owner = THIS_MODULE, .driver_name = "bfin-uart", .dev_name = "ttyS", .major = SERIAL_BFIN_MAJOR, .minor = MINOR_START, .nr = NR_PORTS, .cons = BFIN_SERIAL_CONSOLE, }; static int bfin_serial_suspend(struct platform_device *dev, pm_message_t state) { struct bfin_serial_port *uart = platform_get_drvdata(dev); if (uart) uart_suspend_port(&bfin_serial_reg, &uart->port); return 0; } static int bfin_serial_resume(struct platform_device *dev) { struct bfin_serial_port *uart = platform_get_drvdata(dev); if (uart) uart_resume_port(&bfin_serial_reg, &uart->port); return 0; } static int bfin_serial_probe(struct platform_device *dev) { struct resource *res = dev->resource; int i; for (i = 0; i < dev->num_resources; i++, res++) if (res->flags & IORESOURCE_MEM) break; if (i < dev->num_resources) { for (i = 0; i < NR_PORTS; i++, res++) { if (bfin_serial_ports[i].port.mapbase != res->start) continue; bfin_serial_ports[i].port.dev = &dev->dev; uart_add_one_port(&bfin_serial_reg, &bfin_serial_ports[i].port); platform_set_drvdata(dev, &bfin_serial_ports[i]); } } return 0; } static int bfin_serial_remove(struct platform_device *pdev) { struct bfin_serial_port *uart = platform_get_drvdata(pdev); platform_set_drvdata(pdev, NULL); if (uart) uart_remove_one_port(&bfin_serial_reg, &uart->port); return 0; } static struct platform_driver bfin_serial_driver = { .probe = bfin_serial_probe, .remove = bfin_serial_remove, .suspend = bfin_serial_suspend, .resume = bfin_serial_resume, .driver = { .name = "bfin-uart", }, }; static int __init bfin_serial_init(void) { int ret; pr_info("Serial: Blackfin serial driver\n"); bfin_serial_init_ports(); ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); uart_unregister_driver(&bfin_serial_reg); } } return ret; } static void __exit bfin_serial_exit(void) { platform_driver_unregister(&bfin_serial_driver); uart_unregister_driver(&bfin_serial_reg); } module_init(bfin_serial_init); module_exit(bfin_serial_exit); MODULE_AUTHOR("Aubrey.Li "); MODULE_DESCRIPTION("Blackfin generic serial port driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_BFIN_MAJOR);