Re: [PATCH 1/1] filesystem: Disk Errors at boot-time caused by probe of partitions

[Eric D. Mudama]

On 2/1/07, TJ <linux@xxxxxxxxxxx> wrote:
> ---- short extract ---
> DC202XX: Primary channel reset.
> ide2: reset: success
> hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> hde: task_in_intr: error=0x04 { DriveStatusError }
> ide: failed opcode was: unknown
> end_request: I/O error, dev hde, sector 238276076
> printk: 8 messages suppressed.
> Buffer I/O error on device hde2, logical block 47279294
> hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
> hde: task_in_intr: error=0x04 { DriveStatusError }
> ide: failed opcode was: unknown
> hde: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest
> Error }
...
> The Model number is Maxtor 6Y060L0.

In the log you posted, the drive posted 51/04 to your out-of-bounds
request, but these are 59/04, do they span the end of the device or
something?

I'd be surprised if the drive clunked because of an out of range
command, that model of drive used a very mature interface firmware
with many generations of testing and qualification.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/