[QUESTION] ATA: abnormal status 0x80 on port 0xCC07

[Michal Piotrowski]

Hi Jeff,

What does this mean?

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:67:40:68/00:00:00:00:00/e3 tag 0 cdb 0x0 data 4096 in
        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:00:c3:52:43/00:00:00:00:00/ea tag 0 cdb 0x0 data 131072 in
        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:00:c3:52:43/00:00:00:00:00/ea tag 0 cdb 0x0 data 131072 in
        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/133
ata1: EH complete
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ATA: abnormal status 0x80 on port 0xCC07
ATA: abnormal status 0x80 on port 0xCC07
ATA: abnormal status 0x80 on port 0xCC07
ata1.00: limiting speed to UDMA/100
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ca/00:38:8f:7a:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 28672 out
        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/100
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO                                             or FUA
ATA: abnormal status 0x80 on port 0xCC07
ATA: abnormal status 0x80 on port 0xCC07
ATA: abnormal status 0x80 on port 0xCC07
ata1.00: limiting speed to UDMA/66
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd ca/00:40:ab:e2:4a/00:00:00:00:00/ea tag 0 cdb 0x0 data 32768 out
        res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1: soft resetting port
ata1.00: configured for UDMA/66
ata1: EH complete
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO                                             or FUA

Is this a hardware problem?

Regards,
Michal

--
Michal K. K. Piotrowski
LTG - Linux Testers Group
(http://www.stardust.webpages.pl/ltg/)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/