Re: [BUG] PATA_PCMCIA does not work

[Komuro]

>> [pata_pcmcia dmesg]
>> ata1.00: CFA, max PIO0, 20480 sectors: LBA 
>> ata1.00: ata1: dev 0 multi count 0
>> ata1.01: CFA, max PIO0, 20480 sectors: LBA 
>> ata1.01: ata1: dev 1 multi count 0

>Do you have two cards here ?

No. one card.
I am not sure why two devices are detected.


Actually, this card works properly with ide-cs driver.
but it displays some warning message.


hde: SunDisk SDP5-10, CFA DISK drive
hdf: SunDisk SDP5-10, CFA DISK drive
ide-probe: ignoring undecoded slave
ide2 at 0xd100-0xd107,0xd10e on irq 3
hde: max request size: 128KiB
hde: 20480 sectors (10 MB) w/1KiB Cache, CHS=320/2/32
 hde:hde: set_geometry_intr: status=0x51 { DriveReady SeekComplete Error }
hde: set_geometry_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: unknown
 hde1
ide-cs: hde: Vpp = 0.0


Best Regards
Komuro
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/