[PATCH] drivers: PMC MSP71xx LED driver
From: Marc St-Jean
Date: Mon Feb 26 2007 - 18:49:27 EST
[PATCH] drivers: PMC MSP71xx LED driver
Patch to add LED driver for the PMC-Sierra MSP71xx devices.
This patch references some platform support files previously
submitted to the linux-mips@xxxxxxxxxxxxxx list.
Thanks,
Marc
Signed-off-by: Marc St-Jean <Marc_St-Jean@xxxxxxxxxxxxxx>
---
drivers/i2c/chips/Kconfig | 9
drivers/i2c/chips/Makefile | 1
drivers/i2c/chips/pmctwiled.c | 464 +++++++++++++++++++
include/asm-mips/pmc-sierra/msp71xx/msp_led_macros.h | 282 +++++++++++
4 files changed, 756 insertions(+)
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 87ee3ce..3bef46b 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -50,6 +50,15 @@ config SENSORS_PCF8574
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_PMCTWILED
+ tristate "PMC Led-over-TWI driver"
+ depends on I2C && PMC_MSP
+ help
+ The new VPE-safe backend driver for all the LEDs on the 7120 platform.
+
+ While you may build this as a module, it is recommended you build it
+ into the kernel monolithic so all drivers may access it at all times.
+
config SENSORS_PCA9539
tristate "Philips PCA9539 16-bit I/O port"
depends on I2C && EXPERIMENTAL
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 779868e..4e79e27 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_SENSORS_M41T00) += m41t00.o
obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o
obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_PMCTWILED) += pmctwiled.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
diff --git a/drivers/i2c/chips/pmctwiled.c b/drivers/i2c/chips/pmctwiled.c
new file mode 100644
index 0000000..66de608
--- /dev/null
+++ b/drivers/i2c/chips/pmctwiled.c
@@ -0,0 +1,464 @@
+/*
+ Special LED-over-TWI-PCA9554 driver for PMC Sierra's Garibaldi
+ (and potentially other) boards
+
+ Based on pca9539.c Copyright (C) 2005 Ben Gardner <bgardner@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/i2c.h>
+
+#include <msp_led_macros.h>
+
+#define POLL_PERIOD msecs_to_jiffies(125) /* Poll at 125ms */
+
+/* The externally available "registers" */
+/* TODO: We must somehow ensure these are in "shared memory" for the other VPE
+ * to access */
+u32 _msp_led_register[MSP_LED_COUNT];
+
+/* Internal polling data */
+static struct i2c_client *pmctwiled_device[MSP_LED_NUM_DEVICES];
+static int pmctwiled_running;
+static struct task_struct *pmctwiled_pollthread;
+static u32 private_msp_led_register[MSP_LED_COUNT];
+static u16 current_period;
+
+/* Addresses to scan */
+#define PMCTWILED_BASEADDRESS (0x38)
+
+static unsigned short normal_i2c[] = {
+ PMCTWILED_BASEADDRESS + 0,
+ PMCTWILED_BASEADDRESS + 1,
+ PMCTWILED_BASEADDRESS + 2,
+ PMCTWILED_BASEADDRESS + 3,
+ PMCTWILED_BASEADDRESS + 4,
+ I2C_CLIENT_END
+};
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(pmctwiled);
+
+enum pca9554_cmd {
+ PCA9554_INPUT = 0,
+ PCA9554_OUTPUT = 1,
+ PCA9554_INVERT = 2,
+ PCA9554_DIRECTION = 3,
+};
+
+static int pmctwiled_attach_adapter(struct i2c_adapter *adapter);
+static int pmctwiled_detect(struct i2c_adapter *adapter, int address, int kind);
+static int pmctwiled_detach_client(struct i2c_client *client);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pmctwiled_driver = {
+ .driver = {
+ .name = "pmctwiled",
+ },
+ .attach_adapter = pmctwiled_attach_adapter,
+ .detach_client = pmctwiled_detach_client,
+};
+
+struct pmctwiled_data {
+ struct i2c_client client;
+};
+
+static int pmctwiled_attach_adapter( struct i2c_adapter *adapter )
+{
+ return i2c_probe(adapter, &addr_data, pmctwiled_detect);
+}
+
+/* This function is called by i2c_probe */
+static int pmctwiled_detect( struct i2c_adapter *adapter, int address, int kind )
+{
+ struct i2c_client *new_client = NULL; /* client structure */
+ struct pmctwiled_data *data = NULL; /* local data structure */
+ int err = 0;
+ int devId = address - PMCTWILED_BASEADDRESS;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ goto exit;
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet. */
+ if (!(data = kzalloc(sizeof(struct pmctwiled_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ memset (data, 0x00, sizeof(*data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ new_client->adapter = adapter;
+ new_client->driver = &pmctwiled_driver;
+ new_client->flags = 0;
+
+ /* Detection:
+ * The pca9554 only has 4 registers (0-3).
+ * All other reads should fail
+ */
+ if( i2c_smbus_read_byte_data(new_client, 3) < 0
+ || i2c_smbus_read_byte_data(new_client, 4) >= 0 )
+ goto exit_kfree;
+
+ /* Found PCA9554 (probably) */
+ strlcpy(new_client->name, "pca9554", I2C_NAME_SIZE);
+ printk( "Detected PCA9554 I/O chip (device %d) at 0x%02x\n",
+ devId, address);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto exit_kfree;
+
+ /* Register this in the list of available devices, and set up the
+ * initial state */
+ i2c_smbus_write_byte_data( new_client, PCA9554_OUTPUT,
+ i2c_smbus_read_byte_data(new_client, PCA9554_INPUT) );
+ i2c_smbus_write_byte_data( new_client, PCA9554_DIRECTION,
+ (u8)mspLedInitialInputState[devId] );
+ pmctwiled_device[devId] = new_client;
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int pmctwiled_detach_client( struct i2c_client *client )
+{
+ int err;
+ int devId = client->addr - PMCTWILED_BASEADDRESS;
+
+ /* Clear reference so poll thread doesn't use while detaching */
+ pmctwiled_device[devId] = NULL;
+
+ /* Remove this device from the list of devices */
+ if ((err = i2c_detach_client(client)))
+ return err;
+
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+/**
+ * mode_bits_update - Sets the mode bits of the given led register
+ * @ledRegPtr: Pointer to the led register value that needs to be updated with
+ * the given mode.
+ * @mode: new mode value to be set to the register
+ *
+ * Sets the given mode value to the given led register.
+ **/
+inline void mode_bits_update( u32 *ledRegPtr, msp_led_mode_t mode )
+{
+ /* TODO: validate mode*/
+ *ledRegPtr |= MSP_LED_MODE_MASK;
+ *ledRegPtr &= (~((u32) MSP_LED_MODE_MASK) | mode);
+}
+
+/**
+ * sync_led_timer_with_polling_count - Synchronizes the led timer with polling thread
+ * count
+ * @ledId: Index for the private led register used to obtain timer information
+ * @ledRegPtr: Pointer to the new led register value
+ *
+ * returns 0: If led is in its final period
+ * returns 1: If led is in its initial period
+ *
+ * This function determines if the led timer is in its initial period or the final,
+ * relative to the TWI-polling thread count (current_period) and updates the previous
+ * timer value in the private led register. If the state of the led needs to be
+ * turned off (i.e. when the led has timed out) then the mode bits in the current led
+ * register pointer is set to MSP_LED_OFF and the other data bits are set to 0.
+ *
+ **/
+inline int sync_led_timer_with_polling_count( int ledId, u32 *ledRegPtr )
+{
+ /* Timer variables */
+ int isInInitialPeriod = 0;
+ u8 timer, ledTimeOut,initialPeriod, finalPeriod;
+ u16 totalPeriod;
+
+ /* determine the progress into the current cycle, relative to the POLL_PERIOD */
+ initialPeriod = (u8)(*ledRegPtr >> MSP_LED_INITIALPERIOD_SHIFT);
+ finalPeriod = (u8)(*ledRegPtr >> MSP_LED_FINALPERIOD_SHIFT);
+ ledTimeOut = (u8)(*ledRegPtr >> MSP_LED_WATCHDOG_SHIFT);
+ timer = (u8)(private_msp_led_register[ledId] >> MSP_LED_WATCHDOG_SHIFT);
+
+ totalPeriod = (u16)initialPeriod + (u16)finalPeriod;
+ if (totalPeriod != 0) {
+ isInInitialPeriod = (current_period % totalPeriod) < initialPeriod;
+ }
+
+ /* if the ledTimeOut is set, adjust the current state to be either ON or OFF */
+ if (ledTimeOut > 0) {
+ if (timer >= ledTimeOut) {
+ /* set the register to OFF state */
+ mode_bits_update(ledRegPtr,MSP_LED_OFF);
+ timer = 0;
+
+ /*
+ * TODO:
+ * This introduces a race condition with other thread using
+ * shared memory and must be fixed.
+ */
+ msp_led_turn_off(ledId);
+ }
+ else {
+ timer += 1;
+ }
+ /* update timer */
+ *ledRegPtr &= ~(0xff << MSP_LED_WATCHDOG_SHIFT);
+ *ledRegPtr |= (timer << MSP_LED_WATCHDOG_SHIFT);
+ }
+
+ return isInInitialPeriod;
+}
+
+/**
+ * led_update - Sets the mode bits of the given led register
+ * @ledId - id pertaining to the led that needs update
+ * @prevDirectionBitsPtr - points to the previous direction bits on the bus
+ * @prevDataBitsPtr - points to the previous data bits on the bus
+ * @currDirectionBitsPtr - points to the new direction bits for bus update
+ * @currDataBitsPtr - points to the new data bits for bus update
+ *
+ * returns 1 - led is in output mode
+ * 0 - led is in input mode and hasn't been updated
+ *
+ * Sets the given mode value to the given led register.
+ **/
+inline int led_update( int ledId, u8 *prevDirectionBitsPtr, u8 *prevDataBitsPtr,
+ u8 *currDirectionBitsPtr, u8 *currDataBitsPtr )
+{
+ u32 currLedReg;
+ msp_led_mode_t currMode, prevMode;
+ msp_led_direction_t currDirection, prevDirection;
+ int isInInitialPeriod;
+
+ /* Read the shared memory into a temporary variable */
+ int pin = ledId % MSP_LED_NUM_DEVICE_PINS;
+ currLedReg = _msp_led_register[ledId];
+
+ /* Check if the input direction has changed to output */
+ prevDirection = (msp_led_direction_t)
+ ((private_msp_led_register[ledId] & MSP_LED_DIRECTION_MASK) >>
+ MSP_LED_DIRECTION_SHIFT);
+ currDirection = (msp_led_direction_t)
+ ((currLedReg & MSP_LED_DIRECTION_MASK) >>
+ MSP_LED_DIRECTION_SHIFT);
+ if ((prevDirection == MSP_LED_INPUT) && (currDirection != MSP_LED_OUTPUT))
+ return 0;
+
+ /* get the previous mode of the LED */
+ prevMode = (msp_led_mode_t)(private_msp_led_register[ledId] & MSP_LED_MODE_MASK);
+
+ if (prevMode == MSP_LED_ON)
+ *prevDataBitsPtr |= (1 << pin);
+
+ if (prevDirection == MSP_LED_INPUT)
+ *prevDirectionBitsPtr |= (1 << pin);
+
+
+ /* Update timer and obtain the current period */
+ isInInitialPeriod = sync_led_timer_with_polling_count(ledId, &currLedReg);
+
+ /* get the current mode of the LED */
+ currMode = (msp_led_mode_t)(currLedReg & MSP_LED_MODE_MASK);
+
+ switch (currMode) {
+ case MSP_LED_BLINK:
+ if (isInInitialPeriod) {
+ *currDataBitsPtr |= (1 << pin);
+ mode_bits_update(&currLedReg, MSP_LED_ON);
+ } else {
+ mode_bits_update(&currLedReg,MSP_LED_OFF);
+ }
+ break;
+ case MSP_LED_BLINK_INVERT:
+ if (!isInInitialPeriod) {
+ *currDataBitsPtr |= (1 << pin);
+ mode_bits_update(&currLedReg, MSP_LED_ON);
+ } else {
+ mode_bits_update(&currLedReg,MSP_LED_OFF);
+
+ }
+ break;
+ case MSP_LED_OFF:
+ /* Assuming that the led be turned off when set to output mode */
+ break;
+ case MSP_LED_ON:
+ *currDataBitsPtr |= (1 << pin);
+ break;
+ }
+
+ if (currDirection == MSP_LED_INPUT)
+ *currDirectionBitsPtr |= (1 << pin);
+
+ /* save the current mode */
+ private_msp_led_register[ledId] = currLedReg;
+
+ return 1;
+}
+
+/**
+ * device_update - Updates led device(s) on GPIO
+ * @devId - id pertaining to the device that needs update
+ *
+ * returns 1 - device exists
+ * 0 - device does not exist
+ *
+ * Every pin connected to the GPIO is updated if the state of the pin has changed
+ * from its previous value stored in the memory register. A temporary variable,
+ * currLedReg is used to store the current value of the register corresponding to
+ * the pin under focus. curLedReg gets its value from the global shared memory
+ * registers for leds. This value is compared with the previous value to determine
+ * if a change to the led pin is required. The previous values are stored in the
+ * private led register, private_msp_led_register.
+ *
+ **/
+inline int device_update( int devId )
+{
+ int pin;
+ u8 currDirectionBits, currDataBits, prevDataBits, prevDirectionBits;
+ currDirectionBits = currDataBits = prevDataBits = prevDirectionBits = 0;
+
+ /* if the device wasn't detected */
+ if (pmctwiled_device[devId] == NULL)
+ return 0;
+
+ /* iterate through each pin of the device and update register as necessary */
+ for (pin=0; pin < MSP_LED_NUM_DEVICE_PINS; pin++) {
+ int ledId = MSP_LED_DEVPIN(devId, pin);
+ led_update(ledId, &prevDirectionBits, &prevDataBits,
+ &currDirectionBits, &currDataBits);
+ }
+
+ /* BUS OPERATIONS: if the previous state is different from the current state */
+ if (currDataBits != prevDataBits) {
+ i2c_smbus_write_byte_data(
+ pmctwiled_device[devId], PCA9554_OUTPUT,
+ ~(currDataBits) );
+ }
+ if (currDirectionBits != prevDirectionBits) {
+ i2c_smbus_write_byte_data(
+ pmctwiled_device[devId], PCA9554_DIRECTION,
+ currDirectionBits );
+ }
+
+ return 1;
+}
+
+static int pmctwiled_poll( void *data )
+{
+ pmctwiled_running = 1;
+ current_period = 0;
+
+ /* start the polling loop */
+ while( pmctwiled_running ) {
+ /* Starting Time */
+ unsigned long pollEnd;
+ unsigned long timeLeft;
+ unsigned int pollStart = jiffies;
+
+ /* update every device in here for the current period */
+ int devId;
+ for (devId = 0; devId < MSP_LED_NUM_DEVICES; devId++)
+ device_update(devId);
+
+ /* Ending Time */
+ pollEnd = jiffies;
+ if (pollEnd >= pollStart) {
+ timeLeft = POLL_PERIOD - (pollEnd - pollStart);
+ } else {
+ timeLeft = POLL_PERIOD - ((0xffffffff - pollStart) + pollEnd);
+ printk( "Warning: Delaying for %lu jiffies. This may not be correct because of clock wrapping\n", timeLeft );
+ }
+ if (timeLeft > POLL_PERIOD) {
+ printk( "Warning: Delay of %lu jiffies requested, defaulting back to %lu\n", timeLeft, POLL_PERIOD );
+ timeLeft = POLL_PERIOD;
+ }
+
+ /* reshedule next polling interval */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(timeLeft);
+ current_period++;
+ }
+
+ return 0;
+}
+
+void __init pmctwiled_setup(void)
+{
+ static int called;
+ int dev;
+
+ /* check if already initialized */
+ if( called )
+ return;
+
+ /* initialize LEDs to default state */
+ for( dev = 0; dev < MSP_LED_NUM_DEVICES; dev++ ) {
+ int pin;
+ pmctwiled_device[dev] = NULL;
+
+ for( pin = 0; pin < 8; pin++ ) {
+ int led = MSP_LED_DEVPIN(dev,pin);
+ if (mspLedInitialInputState[dev] & (1 << pin)) {
+ msp_led_disable(led);
+ } else {
+ msp_led_enable(led);
+ if (mspLedInitialPinState[dev] & (1 << pin))
+ msp_led_turn_on(led);
+ else
+ msp_led_turn_off(led);
+ }
+
+ /* Initialize the private led register memory */
+ private_msp_led_register[led] = 0;
+ }
+ }
+
+ /* indicate initialised */
+ called++;
+}
+
+static int __init pmctwiled_init( void )
+{
+ /* setup twi led interface */
+ pmctwiled_setup();
+
+ /* start the polling thread */
+ pmctwiled_pollthread = kthread_run(pmctwiled_poll, NULL,
+ "PMCTwiLedPoller");
+ if (pmctwiled_pollthread == NULL) {
+ printk( "Could not start polling thread\n" );
+ return -ENOMEM;
+ }
+
+ return i2c_add_driver( &pmctwiled_driver );
+}
+
+static void __exit pmctwiled_exit( void )
+{
+ /* stop the polling thread */
+ pmctwiled_running = 0;
+ kthread_stop( pmctwiled_pollthread );
+
+ i2c_del_driver( &pmctwiled_driver );
+}
+
+MODULE_DESCRIPTION("PMC-TWI-LED driver");
+MODULE_LICENSE("GPL");
+
+module_init(pmctwiled_init);
+module_exit(pmctwiled_exit);
diff --git a/include/asm-mips/pmc-sierra/msp71xx/msp_led_macros.h b/include/asm-mips/pmc-sierra/msp71xx/msp_led_macros.h
new file mode 100644
index 0000000..7f4de2f
--- /dev/null
+++ b/include/asm-mips/pmc-sierra/msp71xx/msp_led_macros.h
@@ -0,0 +1,282 @@
+/*
+ * $Id: msp_led_macros.h,v 1.3 2006/12/18 18:16:19 stjeanma Exp $
+ *
+ * Macros for external SMP-safe access to the PMC Athena (MSP7120) reference
+ * board LEDs (over TWI)
+ *
+ * Copyright 2005 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MSP_LED_MACROS_H__
+#define __MSP_LED_MACROS_H__
+
+/* For ll/sc macros */
+#include <asm/regops.h>
+
+/* Generic macros for board setup */
+#define MSP_LED_DEVPIN(DEVICE,PIN) ( (DEVICE * 8) + PIN )
+
+/* ----- Per-board configuration ----- */
+
+/* TODO: Maybe break this out into one file per board? */
+
+#ifdef CONFIG_PMC_MSP7120_GW
+/* Specific LEDs and PINs which can be controlled on the Garibaldi board: */
+#define MSP_LED_PWRSTANDBY_RED MSP_LED_DEVPIN(2,0)
+#define MSP_LED_PWRSTANDBY_GREEN MSP_LED_DEVPIN(2,1)
+#define MSP_LED_LAN1_10 MSP_LED_DEVPIN(2,2)
+#define MSP_LED_LAN1_100 MSP_LED_DEVPIN(2,3)
+#define MSP_LED_LAN2_10 MSP_LED_DEVPIN(2,4)
+#define MSP_LED_LAN2_100 MSP_LED_DEVPIN(2,5)
+#define MSP_LED_LAN3_10 MSP_LED_DEVPIN(2,6)
+#define MSP_LED_LAN3_100 MSP_LED_DEVPIN(2,7)
+#define MSP_LED_LAN4_10 MSP_LED_DEVPIN(3,0)
+#define MSP_LED_LAN4_100 MSP_LED_DEVPIN(3,1)
+#define MSP_LED_LAN5_10 MSP_LED_DEVPIN(3,2)
+#define MSP_LED_LAN5_100 MSP_LED_DEVPIN(3,3)
+#define MSP_LED_RFU_10 MSP_LED_LAN5_10
+#define MSP_LED_RFU_100 MSP_LED_LAN5_100
+#define MSP_PIN_FLASH_RESETB MSP_LED_DEVPIN(3,4)
+#define MSP_LED_PSTN MSP_LED_DEVPIN(3,5)
+#define MSP_PIN_FLASH_BANK MSP_LED_DEVPIN(3,6)
+#define MSP_PIN_USB_HOST_DEV MSP_LED_DEVPIN(3,7)
+#define MSP_LED_PHONE1 MSP_LED_DEVPIN(4,0)
+#define MSP_LED_PHONE2 MSP_LED_DEVPIN(4,1)
+#define MSP_LED_USB MSP_LED_DEVPIN(4,2)
+#define MSP_LED_WIRELESS MSP_LED_DEVPIN(4,3)
+#define MSP_LED_DSL_RED MSP_LED_DEVPIN(4,4)
+#define MSP_LED_DSL_GREEN MSP_LED_DEVPIN(4,5)
+#define MSP_LED_INTERNET_RED MSP_LED_DEVPIN(4,6)
+#define MSP_LED_INTERNET_GREEN MSP_LED_DEVPIN(4,7)
+
+#define MSP_LED_NUM_DEVICES 5
+#define MSP_LED_NUM_DEVICE_PINS 8
+#define MSP_LED_COUNT (MSP_LED_NUM_DEVICE_PINS * MSP_LED_NUM_DEVICES)
+#define MSP_LED_INPUT_MODE 0xff
+#define MSP_LED_OUTPUT_MODE 0x00
+
+/* For each device, which pins will be in "input" mode:
+ * One byte per device:
+ * 0 = Output
+ * 1 = Input
+ */
+static const u8 mspLedInitialInputState[] = {
+ /* No outputs on device 0 or 1, these are inputs only */
+ MSP_LED_INPUT_MODE, MSP_LED_INPUT_MODE,
+ /* All outputs on device 2 through 4 */
+ MSP_LED_OUTPUT_MODE, MSP_LED_OUTPUT_MODE, MSP_LED_OUTPUT_MODE,
+};
+
+/* For each device, which output pins should start on and off:
+ * One byte per device:
+ * 0 = OFF = HI
+ * 1 = ON = Lo
+ */
+static const u8 mspLedInitialPinState[] = {
+ 0, 0, /* No initial state, these are input only */
+ (1 << 1), /* PWR_GREEN LED on, all others off */
+ 0, /* All off */
+ 0, /* All off */
+};
+#endif /* CONFIG_PMC_MSP7120_GW */
+
+/* ----- End of Per-board configuration ----- */
+
+/* Definitions for LED blink rate value */
+#define MSP_LED_RATE_MAX 0xff
+
+/* -- The actual LED register list -- */
+extern u32 _msp_led_register[];
+
+/* Each 'register' has the following format:
+ *
+ * +-------+-----------------------------+
+ * | BITS | DESCRIPTION |
+ * +-------+-----------------------------+
+ * | 31:24 | Watchdog timer |
+ * | | Set to non-zero to start |
+ * | | or to kick, this number |
+ * | | will be decremented every |
+ * | | 125ms, if it reaches zero |
+ * | | the LED will be turned off|
+ * +-------+-----------------------------+
+ * | 23:16 | Initial Period |
+ * | | 125ms increments |
+ * +-------+-----------------------------+
+ * | 15:8 | Final Period |
+ * | | 125ms increments |
+ * +-------+-----------------------------+
+ * | 7:7 | Direction |
+ * | | See msp_led_direction_t |
+ * +-------+-----------------------------+
+ * | 6:0 | Mode |
+ * | | See msp_led_mode_t |
+ * +-------+-----------------------------+
+ *
+ * Note: You should probably not affect these registers directly but use the
+ * macros in this file. That said, if you need to touch them, be sure to use
+ * ll/sc instructions (or the macros in regops.h) so that values are preserved
+ * safely.
+ */
+
+/* Direction modes */
+typedef enum {
+ MSP_LED_INPUT = 0,
+ MSP_LED_OUTPUT,
+} msp_led_direction_t;
+
+/* Output modes */
+typedef enum {
+ MSP_LED_OFF = 0, /* Off steady */
+ MSP_LED_ON, /* On steady */
+ MSP_LED_BLINK, /* On for initialPeriod, off for finalPeriod */
+ MSP_LED_BLINK_INVERT, /* Off for initialPeriod, on for finalPeriod */
+} msp_led_mode_t;
+
+#define MSP_LED_MODE_MASK 0x7f
+#define MSP_LED_DIRECTION_MASK 0x80
+#define MSP_LED_DIRECTION_SHIFT 7
+#define MSP_LED_INITIALPERIOD_SHIFT 8
+#define MSP_LED_FINALPERIOD_SHIFT 16
+#define MSP_LED_WATCHDOG_SHIFT 24
+
+/* -- Public API functions -- */
+
+/* Low-level macro, explicitly sets the specified LED with the values */
+static inline void msp_led_set_mode( u16 led,
+ msp_led_mode_t mode, u8 initialPeriod,
+ u8 finalPeriod, u8 watchdogTimeout )
+{
+ set_value_reg32( &_msp_led_register[led],
+ 0xffffff7f,
+ watchdogTimeout << MSP_LED_WATCHDOG_SHIFT |
+ initialPeriod << MSP_LED_INITIALPERIOD_SHIFT |
+ finalPeriod << MSP_LED_FINALPERIOD_SHIFT |
+ ((u8)mode & MSP_LED_MODE_MASK)
+ );
+}
+
+static inline void msp_led_set_direction( u16 led,
+ msp_led_direction_t direction )
+{
+ set_value_reg32( &_msp_led_register[led],
+ 0x00000080,
+ ((u8)direction << MSP_LED_DIRECTION_SHIFT)
+ );
+}
+
+/* Turns the LED on */
+static inline void msp_led_turn_on( u16 led )
+{
+ msp_led_set_mode( led, MSP_LED_ON, 0, 0, 0 );
+}
+
+/* Turns the LED off */
+static inline void msp_led_turn_off( u16 led )
+{
+ msp_led_set_mode( led, MSP_LED_OFF, 0, 0, 0 );
+}
+
+/* For non-LED pins, these macros set HI and LO accordingly */
+#define msp_led_pin_hi msp_led_turn_off
+#define msp_led_pin_lo msp_led_turn_on
+
+/* Blinks a single LED
+ * Period is specified in 125ms chunks */
+static inline void msp_led_blink( u16 led, u8 initialPeriod, u8 finalPeriod )
+{
+ msp_led_set_mode( led, MSP_LED_BLINK, initialPeriod,
+ finalPeriod, 0 );
+}
+
+static inline void msp_led_blink_2Hz( u16 led)
+{
+ msp_led_set_mode( led, MSP_LED_BLINK, 2, 2, 0 );
+}
+
+static inline void msp_led_blink_4Hz( u16 led)
+{
+ msp_led_set_mode( led, MSP_LED_BLINK, 1, 1, 0 );
+}
+
+/* Blinks one LED, then the other
+ * Period is specified in 125ms chunks */
+static inline void msp_led_alternate( u16 led1, u16 led2,
+ u8 led1Period, u8 led2Period )
+{
+ msp_led_set_mode( led1, MSP_LED_BLINK, led1Period,
+ led2Period, 0 );
+ msp_led_set_mode( led2, MSP_LED_BLINK_INVERT, led1Period,
+ led2Period, 0 );
+}
+
+/* Stops both alternating LEDs from blinking, leaving 'onLed' on and 'offLed'
+ * off */
+static inline void msp_led_alternate_stop( u16 onLed, u16 offLed )
+{
+ msp_led_turn_on( onLed );
+ msp_led_turn_off( offLed );
+}
+
+/* Starts the LED blinking at the specified rate until the watchdogTimeout
+ * (specified in 125ms increments) expires, when the LED is turned off.
+ *
+ * This can also be used to kick the watchdog.
+ *
+ * Calling any other 'msp_led_...' macro will disable the watchdog, as will
+ * kicking this watchdog with a watchdogtimeout value of 0. When the watchdog
+ * is disabled, the LED will blink forever.
+ */
+static inline void msp_led_watchdog_init( u16 led, u8 initialPeriod,
+ u8 finalPeriod, u8 watchdogTimeout )
+{
+ msp_led_set_mode( led, MSP_LED_BLINK, initialPeriod,
+ finalPeriod, watchdogTimeout );
+}
+
+/* Kicks a 'watchdog' LED. If the LED is already blinking or on,
+ * it will start the watchdog countdown. If the LED is already off or the
+ * wathdog timeout given is 0, it will ensure the LED is off and the watchdog
+ * timer has stopped.
+ */
+static inline void msp_led_watchdog_kick( u16 led, u8 watchdogTimeout )
+{
+ set_value_reg32( &_msp_led_register[led],
+ 0xff << MSP_LED_WATCHDOG_SHIFT,
+ watchdogTimeout << MSP_LED_WATCHDOG_SHIFT );
+}
+
+/*
+ * Set the direction of the led pins.
+ */
+static inline void msp_led_enable( u16 led )
+{
+ msp_led_set_direction( led, MSP_LED_OUTPUT );
+}
+
+static inline void msp_led_disable( u16 led )
+{
+ msp_led_set_direction( led, MSP_LED_INPUT );
+}
+
+#endif /* __MSP_LED_MACROS_H__ */
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/