Re: [PATCH] Make ati_remote button repeat sensitivity soft-configurable

[Vincent Vanackere]

On 4/4/07, Éric Piel <Eric.Piel@xxxxxxxxxxxxxxxx> wrote:

> This default value is set to 300 ms. On my Xserver, the default value is
> 660 ms and by default in my distrib it's set to 500 ms. So, indeed, the
> default value of the ati_remote is quite small. Maybe you could increase
> FILTER_MAX to 10 (= 600 ms) in order to have something saner?

Well, this value was chosen because it matches what the hardware does
: as explained in the comments, the hardware generates exactly 5
events for the first keypress (spaced by ~50ms if I recall correctly).

At least on my hardware (=> Vendor=0bc7 ProdID=0004 Rev= 1.00), the
current default value match exactly what I'm expecting (never had the
problem : "if you do anything but barely tap the button you can get
multiple events reported").
Just a thought : perhaps some models are more sensitive than others
(and so the default should be made dependent on the exact remote
model)... what is your hardware id ?

Best regards,

Vincent
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/