[PATCH 62/90] ARM: OMAP: Merge board specific files from N800 tree

From: Kai Svahn
Date: Fri Jan 26 2007 - 15:39:48 EST


This patch merges board specific files from N800 tree.
Nokia has published the files at:

http://repository.maemo.org/pool/maemo3.0/free/source/
kernel-source-rx-34_2.6.18.orig.tar.gz
kernel-source-rx-34_2.6.18-osso29.diff.gz

Signed-off-by: Kai Svahn <kai.svahn@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>

--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -22,9 +22,14 @@ config MACH_OMAP_GENERIC
bool "Generic OMAP board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX

+config MACH_NOKIA_N800
+ bool "Nokia N800"
+ depends on ARCH_OMAP24XX
+
config MACH_OMAP2_TUSB6010
bool
depends on ARCH_OMAP2 && ARCH_OMAP2420
+ default y if MACH_NOKIA_N800

config MACH_OMAP_H4
bool "OMAP 2420 H4 board"
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -20,6 +20,10 @@ obj-$(CONFIG_MACH_OMAP_GENERIC) += boar
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
+obj-$(CONFIG_MACH_NOKIA_N800) += board-n800.o board-n800-flash.o \
+ board-n800-mmc.o board-n800-bt.o \
+ board-n800-audio.o board-n800-usb.o \
+ board-n800-dsp.o board-n800-pm.o

# TUSB 6010 chips
obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-audio.c
@@ -0,0 +1,357 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-n800-audio.c
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Contact: Juha Yrjola
+ * Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/spi/tsc2301.h>
+
+#include <asm/io.h>
+#include <asm/arch/eac.h>
+
+#include "../plat-omap/dsp/dsp_common.h"
+
+#if defined(CONFIG_SPI_TSC2301_AUDIO) && defined(CONFIG_SND_OMAP24XX_EAC)
+#define AUDIO_ENABLED
+
+static struct clk *sys_clkout2;
+static struct clk *func96m_clk;
+static struct device *eac_device;
+static struct device *tsc2301_device;
+
+static int enable_audio;
+static int audio_ok;
+static spinlock_t audio_lock;
+
+
+/*
+ * Leaving EAC pins multiplexed to EAC functionality results
+ * in about 2 mA extra current leaked. The workaround is to
+ * multiplex the EAC pins to protected mode (with pull-ups enabled)
+ * whenever audio is not being used.
+ */
+static int mux_disabled;
+static u32 saved_mux[2];
+
+static void n800_enable_eac_mux(void)
+{
+ if (!mux_disabled)
+ return;
+ __raw_writel(saved_mux[0], IO_ADDRESS(0x480000e8));
+ __raw_writel(saved_mux[1], IO_ADDRESS(0x48000124));
+ mux_disabled = 0;
+}
+
+static void n800_disable_eac_mux(void)
+{
+ u32 l;
+
+ if (mux_disabled) {
+ WARN_ON(mux_disabled);
+ return;
+ }
+ saved_mux[0] = __raw_readl(IO_ADDRESS(0x480000e8));
+ saved_mux[1] = __raw_readl(IO_ADDRESS(0x48000124));
+ l = saved_mux[0] & ~0xff;
+ l |= 0x1f;
+ __raw_writel(l, IO_ADDRESS(0x480000e8));
+ __raw_writel(0x1f1f1f1f, IO_ADDRESS(0x48000124));
+ mux_disabled = 1;
+}
+
+static int n800_eac_enable_ext_clocks(struct device *dev)
+{
+ BUG_ON(tsc2301_device == NULL);
+ n800_enable_eac_mux();
+ tsc2301_enable_mclk(tsc2301_device);
+
+ return 0;
+}
+
+static void n800_eac_disable_ext_clocks(struct device *dev)
+{
+ BUG_ON(tsc2301_device == NULL);
+ n800_disable_eac_mux();
+ tsc2301_disable_mclk(tsc2301_device);
+}
+
+static int n800_audio_set_power(void *pdata, int dac, int adc)
+{
+ BUG_ON(pdata != tsc2301_device);
+ tsc2301_mixer_set_power(tsc2301_device, dac, adc);
+
+ return 0;
+}
+
+static int n800_audio_register_controls(void *pdata, struct snd_card *card)
+{
+ BUG_ON(pdata != tsc2301_device);
+ return tsc2301_mixer_register_controls(tsc2301_device, card);
+}
+
+static struct eac_codec n800_eac_codec = {
+ .mclk_src = EAC_MCLK_EXT_2x12288000,
+ .codec_mode = EAC_CODEC_I2S,
+ .codec_conf.i2s.polarity_changed_mode = 0,
+ .codec_conf.i2s.sync_delay_enable = 0,
+ .default_rate = 48000,
+ .set_power = n800_audio_set_power,
+ .register_controls = n800_audio_register_controls,
+ .short_name = "TSC2301",
+};
+
+static int n800_register_codec(void)
+{
+ int r, do_enable = 0;
+ unsigned long flags;
+
+ n800_eac_codec.private_data = tsc2301_device;
+ r = eac_register_codec(eac_device, &n800_eac_codec);
+ if (r < 0)
+ return r;
+ spin_lock_irqsave(&audio_lock, flags);
+ audio_ok = 1;
+ if (enable_audio)
+ do_enable = 1;
+ spin_unlock_irqrestore(&audio_lock, flags);
+ if (do_enable)
+ eac_set_mode(eac_device, 1, 1);
+ return 0;
+}
+
+static void n800_unregister_codec(void)
+{
+ audio_ok = 0;
+ eac_unregister_codec(eac_device);
+ eac_set_mode(eac_device, 0, 0);
+}
+
+static int n800_eac_init(struct device *dev)
+{
+ int r;
+
+ BUG_ON(eac_device != NULL);
+ eac_device = dev;
+ if (tsc2301_device != NULL) {
+ r = n800_register_codec();
+ if (r < 0)
+ return r;
+ }
+
+ return 0;
+}
+
+static void n800_eac_cleanup(struct device *dev)
+{
+ eac_device = NULL;
+ if (tsc2301_device != NULL)
+ n800_unregister_codec();
+}
+
+static int n800_codec_get_clocks(struct device *dev)
+{
+ sys_clkout2 = clk_get(dev, "sys_clkout2");
+ if (IS_ERR(sys_clkout2)) {
+ dev_err(dev, "Could not get sys_clkout2\n");
+ return -ENODEV;
+ }
+ /* configure 12 MHz output on SYS_CLKOUT2. Therefore we must use
+ * 96 MHz as its parent in order to get 12 MHz */
+ func96m_clk = clk_get(dev, "func_96m_ck");
+ if (IS_ERR(func96m_clk)) {
+ dev_err(dev, "Could not get func 96M clock\n");
+ clk_put(sys_clkout2);
+ return -ENODEV;
+ }
+
+ clk_set_parent(sys_clkout2, func96m_clk);
+ clk_set_rate(sys_clkout2, 12000000);
+
+ return 0;
+}
+
+static void n800_codec_put_clocks(struct device *dev)
+{
+ clk_put(func96m_clk);
+ clk_put(sys_clkout2);
+}
+
+static int n800_codec_enable_clock(struct device *dev)
+{
+ int err;
+
+ err = clk_enable(sys_clkout2);
+ if (err)
+ return err;
+ /* TODO: 'educated' guess for audio codec's PLL startup delay */
+ mdelay(1);
+
+ return 0;
+}
+
+static void n800_codec_disable_clock(struct device *dev)
+{
+ clk_disable(sys_clkout2);
+}
+
+static int n800_codec_init(struct device *dev)
+{
+ int r;
+
+ BUG_ON(tsc2301_device != NULL);
+ tsc2301_device = dev;
+ if ((r = n800_codec_get_clocks(dev)) < 0)
+ return r;
+ if (eac_device != NULL) {
+ r = n800_register_codec();
+ if (r < 0) {
+ n800_codec_put_clocks(dev);
+ return r;
+ }
+ }
+ return 0;
+}
+
+static void n800_codec_cleanup(struct device *dev)
+{
+ tsc2301_device = NULL;
+ if (eac_device != NULL)
+ n800_unregister_codec();
+ n800_codec_put_clocks(dev);
+}
+
+static struct eac_platform_data n800_eac_data = {
+ .init = n800_eac_init,
+ .cleanup = n800_eac_cleanup,
+ .enable_ext_clocks = n800_eac_enable_ext_clocks,
+ .disable_ext_clocks = n800_eac_disable_ext_clocks,
+};
+
+static const struct tsc2301_mixer_gpio n800_mixer_gpios[] = {
+ {
+ .name = "Headset Amplifier",
+ .gpio = 1,
+ .deactivate_on_pd = 1,
+ }, {
+ .name = "Speaker Amplifier",
+ .gpio = 2,
+ .def_enable = 1,
+ .deactivate_on_pd = 1,
+ }, {
+ .name = "Headset Mic Select",
+ .gpio = 3,
+ }
+};
+
+static struct platform_device retu_headset_device = {
+ .name = "retu-headset",
+ .id = -1,
+ .dev = {
+ .release = NULL,
+ },
+};
+
+void __init n800_audio_init(struct tsc2301_platform_data *tc)
+{
+ spin_lock_init(&audio_lock);
+
+ if (platform_device_register(&retu_headset_device) < 0)
+ return;
+ omap_init_eac(&n800_eac_data);
+
+ tc->pll_pdc = 7;
+ tc->pll_a = 7;
+ tc->pll_n = 9;
+ tc->pll_output = 1;
+ tc->mclk_ratio = TSC2301_MCLK_256xFS;
+ tc->i2s_sample_rate = TSC2301_I2S_SR_48000;
+ tc->i2s_format = TSC2301_I2S_FORMAT0;
+ tc->power_down_blocks = TSC2301_REG_PD_MISC_MOPD;
+ tc->mixer_gpios = n800_mixer_gpios;
+ tc->n_mixer_gpios = ARRAY_SIZE(n800_mixer_gpios);
+ tc->codec_init = n800_codec_init;
+ tc->codec_cleanup = n800_codec_cleanup;
+ tc->enable_clock = n800_codec_enable_clock;
+ tc->disable_clock = n800_codec_disable_clock;
+}
+
+#else
+
+void __init n800_audio_init(void)
+{
+}
+
+#endif
+
+#ifdef CONFIG_OMAP_DSP
+
+int n800_audio_enable(struct dsp_kfunc_device *kdev, int stage)
+{
+#ifdef AUDIO_ENABLED
+ unsigned long flags;
+ int do_enable = 0;
+
+ spin_lock_irqsave(&audio_lock, flags);
+
+ pr_debug("DSP power up request (audio codec %sinitialized)\n",
+ audio_ok ? "" : "not ");
+
+ if (enable_audio)
+ goto out;
+ enable_audio = 1;
+ if (audio_ok)
+ do_enable = 1;
+out:
+ spin_unlock_irqrestore(&audio_lock, flags);
+ if (do_enable)
+ eac_set_mode(eac_device, 1, 1);
+#endif
+ return 0;
+}
+
+int n800_audio_disable(struct dsp_kfunc_device *kdev, int stage)
+{
+#ifdef AUDIO_ENABLED
+ unsigned long flags;
+ int do_disable = 0;
+
+ spin_lock_irqsave(&audio_lock, flags);
+
+ pr_debug("DSP power down request (audio codec %sinitialized)\n",
+ audio_ok ? "" : "not ");
+
+ if (!enable_audio)
+ goto out;
+ enable_audio = 0;
+ if (audio_ok)
+ do_disable = 1;
+out:
+ spin_unlock_irqrestore(&audio_lock, flags);
+ if (do_disable)
+ eac_set_mode(eac_device, 0, 0);
+#endif
+ return 0;
+}
+
+#endif /* CONFIG_OMAP_DSP */
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-bt.c
@@ -0,0 +1,42 @@
+/*
+ * Nokia N800 platform-specific data for Bluetooth
+ *
+ * Copyright (C) 2005, 2006 Nokia Corporation
+ * Contact: Ville Tervo <ville.tervo@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <asm/arch/board.h>
+
+static struct platform_device n800_bt_device = {
+ .name = "hci_h4p",
+ .id = -1,
+ .num_resources = 0,
+};
+
+void __init n800_bt_init(void)
+{
+ const struct omap_bluetooth_config *bt_config;
+
+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
+ struct omap_bluetooth_config);
+ n800_bt_device.dev.platform_data = (void *) bt_config;
+ if (platform_device_register(&n800_bt_device) < 0)
+ BUG();
+}
+
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-dsp.c
@@ -0,0 +1,156 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n800-dsp.c
+ *
+ * Copyright (C) 2006 Nokia Corporation.
+ *
+ * Contact: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/board.h>
+
+#include "../plat-omap/dsp/dsp_common.h"
+
+#if defined(CONFIG_OMAP_DSP)
+
+/*
+ * dsp peripheral device: AUDIO
+ */
+static struct dsp_kfunc_device n800_audio_device = {
+ .name = "audio",
+ .type = DSP_KFUNC_DEV_TYPE_AUDIO,
+ .enable = n800_audio_enable,
+ .disable = n800_audio_disable,
+};
+
+/*
+ * dsp peripheral device: TIMER
+ */
+static int dsp_timer_probe(struct dsp_kfunc_device *kdev)
+{
+ char clockname[20];
+
+ strcpy(clockname, kdev->name);
+ strcat(clockname, "_fck");
+
+ kdev->fck = clk_get(NULL, clockname);
+ if (IS_ERR(kdev->fck)) {
+ printk(KERN_ERR "couldn't acquire %s\n", clockname);
+ return PTR_ERR(kdev->fck);
+ }
+ pr_debug("%s probed successfully\n", clockname);
+
+ strcpy(clockname, kdev->name);
+ strcat(clockname, "_ick");
+ kdev->ick = clk_get(NULL, clockname);
+ if (IS_ERR(kdev->ick)) {
+ printk(KERN_ERR "couldn't acquire %s\n", clockname);
+ goto fail;
+ }
+ pr_debug("%s probed successfully\n", clockname);
+
+ return 0;
+ fail:
+ clk_put(kdev->fck);
+
+ return PTR_ERR(kdev->ick);
+}
+
+static int dsp_timer_remove(struct dsp_kfunc_device *kdev)
+{
+ clk_put(kdev->ick);
+ clk_put(kdev->fck);
+ pr_debug("%s removed successfully\n", kdev->name);
+ return 0;
+}
+
+static int dsp_timer_enable(struct dsp_kfunc_device *kdev, int stage)
+{
+ pr_debug("%s enabled(%d)\n", kdev->name, stage);
+
+ mutex_lock(&kdev->lock);
+
+ if (kdev->enabled)
+ goto out;
+ kdev->enabled = 1;
+
+ clk_enable(kdev->fck);
+ clk_enable(kdev->ick);
+ out:
+ mutex_unlock(&kdev->lock);
+
+ return 0;
+}
+
+static int dsp_timer_disable(struct dsp_kfunc_device *kdev, int stage)
+{
+ pr_debug("%s disabled(%d)\n", kdev->name, stage);
+
+ mutex_lock(&kdev->lock);
+
+ if (kdev->enabled == 0)
+ goto out;
+ kdev->enabled = 0;
+
+ clk_disable(kdev->ick);
+ clk_disable(kdev->fck);
+ out:
+ mutex_unlock(&kdev->lock);
+
+ return 0;
+}
+
+static struct dsp_kfunc_device n800_timer_device = {
+ .name = "gpt5",
+ .type = DSP_KFUNC_DEV_TYPE_COMMON,
+ .probe = dsp_timer_probe,
+ .remove = dsp_timer_remove,
+ .enable = dsp_timer_enable,
+ .disable = dsp_timer_disable,
+};
+
+static struct dsp_kfunc_device *n800_kfunc_dev[] = {
+ &n800_audio_device,
+ &n800_timer_device,
+};
+
+void __init n800_dsp_init(void)
+{
+ int i, ret;
+ struct dsp_kfunc_device **p = n800_kfunc_dev;
+
+ for (i = 0; i < ARRAY_SIZE(n800_kfunc_dev); i++) {
+ ret = dsp_kfunc_device_register(p[i]);
+ if (ret) {
+ printk(KERN_ERR
+ "KFUNC device registration failed: %s\n",
+ p[i]->name);
+ }
+ }
+}
+
+#else
+void __init n800_dsp_init(void) { }
+#endif /* CONFIG_OMAP_DSP */
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-flash.c
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-n800-flash.c
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/board.h>
+
+static struct mtd_partition n800_partitions[8];
+
+static struct omap_onenand_platform_data n800_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 26,
+ .parts = n800_partitions,
+ .nr_parts = 0 /* filled later */
+};
+
+static struct platform_device n800_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &n800_onenand_data,
+ },
+};
+
+
+void __init n800_flash_init(void)
+{
+ const struct omap_partition_config *part;
+ int i = 0;
+
+ while ((part = omap_get_nr_config(OMAP_TAG_PARTITION,
+ struct omap_partition_config, i)) != NULL) {
+ struct mtd_partition *mpart;
+
+ mpart = n800_partitions + i;
+ mpart->name = (char *) part->name;
+ mpart->size = part->size;
+ mpart->offset = part->offset;
+ mpart->mask_flags = part->mask_flags;
+ i++;
+ if (i == ARRAY_SIZE(n800_partitions)) {
+ printk(KERN_ERR "Too many partitions supplied\n");
+ return;
+ }
+ }
+ n800_onenand_data.nr_parts = i;
+ if (platform_device_register(&n800_onenand_device) < 0) {
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ return;
+ }
+}
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-mmc.c
@@ -0,0 +1,282 @@
+/*
+ * linux/arch/arm/mach-omap2/board-n800-mmc.c
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/arch/mmc.h>
+#include <asm/arch/menelaus.h>
+#include <asm/arch/gpio.h>
+
+#ifdef CONFIG_MMC_OMAP
+
+static const int slot_switch_gpio = 96;
+static const int slot1_wp_gpio = 23;
+static const int slot2_wp_gpio = 8;
+static int slot1_cover_closed;
+static int slot2_cover_closed;
+static struct device *mmc_device;
+
+/*
+ * VMMC --> slot 1
+ * VDCDC3_APE, VMCS2_APE --> slot 2
+ * GPIO96 --> Menelaus GPIO2
+ */
+
+static int n800_mmc_switch_slot(struct device *dev, int slot)
+{
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Choose slot %d\n", slot + 1);
+#endif
+ if (slot == 0)
+ omap_set_gpio_dataout(slot_switch_gpio, 0);
+ else
+ omap_set_gpio_dataout(slot_switch_gpio, 1);
+ return 0;
+}
+
+static int n800_mmc_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ int mV;
+
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
+ power_on ? "on" : "off", vdd);
+#endif
+ if (slot == 0) {
+ if (!power_on)
+ return menelaus_set_vmmc(0);
+ switch (1 << vdd) {
+ case MMC_VDD_33_34:
+ case MMC_VDD_32_33:
+ case MMC_VDD_31_32:
+ mV = 3100;
+ break;
+ case MMC_VDD_30_31:
+ mV = 3000;
+ break;
+ case MMC_VDD_28_29:
+ mV = 2800;
+ break;
+ case MMC_VDD_18_19:
+ mV = 1850;
+ break;
+ default:
+ BUG();
+ }
+ return menelaus_set_vmmc(mV);
+ } else {
+ if (!power_on)
+ return menelaus_set_vdcdc(3, 0);
+ switch (1 << vdd) {
+ case MMC_VDD_33_34:
+ case MMC_VDD_32_33:
+ mV = 3300;
+ break;
+ case MMC_VDD_30_31:
+ case MMC_VDD_29_30:
+ mV = 3000;
+ break;
+ case MMC_VDD_28_29:
+ case MMC_VDD_27_28:
+ mV = 2800;
+ break;
+ case MMC_VDD_24_25:
+ case MMC_VDD_23_24:
+ mV = 2400;
+ break;
+ case MMC_VDD_22_23:
+ case MMC_VDD_21_22:
+ mV = 2200;
+ break;
+ case MMC_VDD_20_21:
+ case MMC_VDD_19_20:
+ mV = 2000;
+ break;
+ case MMC_VDD_18_19:
+ case MMC_VDD_17_18:
+ mV = 1800;
+ break;
+ case MMC_VDD_150_155:
+ case MMC_VDD_145_150:
+ mV = 1500;
+ break;
+ default:
+ BUG();
+ }
+ return menelaus_set_vdcdc(3, mV);
+ }
+ return 0;
+}
+
+static int n800_mmc_set_bus_mode(struct device *dev, int slot, int bus_mode)
+{
+ int r;
+
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Set slot %d bus mode %s\n", slot + 1,
+ bus_mode == MMC_BUSMODE_OPENDRAIN ? "open-drain" : "push-pull");
+#endif
+ BUG_ON(slot != 0 && slot != 1);
+ slot++;
+ switch (bus_mode) {
+ case MMC_BUSMODE_OPENDRAIN:
+ r = menelaus_set_mmc_opendrain(slot, 1);
+ break;
+ case MMC_BUSMODE_PUSHPULL:
+ r = menelaus_set_mmc_opendrain(slot, 0);
+ break;
+ default:
+ BUG();
+ }
+ if (r != 0 && printk_ratelimit())
+ dev_err(dev, "MMC: unable to set bus mode for slot %d\n",
+ slot);
+ return r;
+}
+
+#if 0
+static int n800_mmc_get_ro(struct device *dev, int slot)
+{
+ int ro;
+
+ slot++;
+ if (slot == 1)
+ ro = omap_get_gpio_datain(slot1_wp_gpio);
+ else
+ ro = omap_get_gpio_datain(slot2_wp_gpio);
+#ifdef CONFIG_MMC_DEBUG
+ dev_dbg(dev, "Get RO slot %d: %s\n",
+ slot, ro ? "read-only" : "read-write");
+#endif
+ return ro;
+}
+#endif
+
+static int n800_mmc_get_cover_state(struct device *dev, int slot)
+{
+ slot++;
+ BUG_ON(slot != 1 && slot != 2);
+ if (slot == 1)
+ return slot1_cover_closed;
+ else
+ return slot2_cover_closed;
+}
+
+static void n800_mmc_callback(void *data, u8 card_mask)
+{
+ if (card_mask & (1 << 1))
+ slot2_cover_closed = 0;
+ else
+ slot2_cover_closed = 1;
+ omap_mmc_notify_cover_event(mmc_device, 1, slot2_cover_closed);
+}
+
+void n800_mmc_slot1_cover_handler(void *arg, int state)
+{
+ if (mmc_device == NULL)
+ return;
+
+ slot1_cover_closed = state;
+ omap_mmc_notify_cover_event(mmc_device, 0, state);
+}
+
+static int n800_mmc_late_init(struct device *dev)
+{
+ int r;
+
+ mmc_device = dev;
+
+ r = menelaus_set_slot_sel(1);
+ if (r < 0)
+ return r;
+
+ r = menelaus_set_mmc_slot(1, 1, 0, 1);
+ if (r < 0)
+ return r;
+ r = menelaus_set_mmc_slot(2, 1, 0, 1);
+ if (r < 0)
+ return r;
+
+ r = menelaus_get_slot_pin_states();
+ if (r < 0)
+ return r;
+
+ if (r & (1 << 1))
+ slot2_cover_closed = 1;
+ else
+ slot2_cover_closed = 0;
+
+ r = menelaus_register_mmc_callback(n800_mmc_callback, NULL);
+
+ return r;
+}
+
+static void n800_mmc_cleanup(struct device *dev)
+{
+ menelaus_unregister_mmc_callback();
+}
+
+static struct omap_mmc_platform_data n800_mmc_data = {
+ .enabled = 1,
+ .nr_slots = 2,
+ .wire4 = 1,
+ .switch_slot = n800_mmc_switch_slot,
+ .init = n800_mmc_late_init,
+ .cleanup = n800_mmc_cleanup,
+ .slots[0] = {
+ .set_power = n800_mmc_set_power,
+ .set_bus_mode = n800_mmc_set_bus_mode,
+ .get_ro = NULL,
+ .get_cover_state= n800_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_18_19 | MMC_VDD_28_29 | MMC_VDD_30_31 |
+ MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "internal",
+ },
+ .slots[1] = {
+ .set_power = n800_mmc_set_power,
+ .set_bus_mode = n800_mmc_set_bus_mode,
+ .get_ro = NULL,
+ .get_cover_state= n800_mmc_get_cover_state,
+ .ocr_mask = MMC_VDD_150_155 | MMC_VDD_145_150 | MMC_VDD_17_18 |
+ MMC_VDD_18_19 | MMC_VDD_19_20 | MMC_VDD_20_21 |
+ MMC_VDD_21_22 | MMC_VDD_22_23 | MMC_VDD_23_24 |
+ MMC_VDD_24_25 | MMC_VDD_27_28 | MMC_VDD_28_29 |
+ MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_32_33 |
+ MMC_VDD_33_34,
+ .name = "external",
+ },
+};
+
+void __init n800_mmc_init(void)
+{
+ omap_set_mmc_info(1, &n800_mmc_data);
+ if (omap_request_gpio(slot_switch_gpio) < 0)
+ BUG();
+ omap_set_gpio_dataout(slot_switch_gpio, 0);
+ omap_set_gpio_direction(slot_switch_gpio, 0);
+ if (omap_request_gpio(slot1_wp_gpio) < 0)
+ BUG();
+ if (omap_request_gpio(slot2_wp_gpio) < 0)
+ BUG();
+ omap_set_gpio_direction(slot1_wp_gpio, 1);
+ omap_set_gpio_direction(slot2_wp_gpio, 1);
+}
+
+#else
+
+void __init n800_mmc_init(void)
+{
+}
+
+void n800_mmc_slot1_cover_handler(void *arg, int state)
+{
+}
+
+#endif
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-pm.c
@@ -0,0 +1,79 @@
+/*
+ * Nokia N800 PM code
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Amit Kucheria <amit.kucheria@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/arch/menelaus.h>
+
+#ifdef CONFIG_MENELAUS
+
+static int n800_auto_sleep_regulators(void)
+{
+ u32 val;
+ int ret;
+
+ val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
+ | EN_VAUX_SLEEP | EN_VIO_SLEEP \
+ | EN_VMEM_SLEEP | EN_DC3_SLEEP \
+ | EN_VC_SLEEP | EN_DC2_SLEEP;
+
+ ret = menelaus_set_regulator_sleep(1, val);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set regulators to sleep on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n800_auto_voltage_scale(void)
+{
+ int ret;
+
+ ret = menelaus_set_vcore_hw(1400, 1050);
+ if (ret < 0) {
+ printk(KERN_ERR "Could not set VCORE voltage on "
+ "menelaus: %u\n", ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int n800_menelaus_init(struct device *dev)
+{
+ int ret;
+
+ ret = n800_auto_voltage_scale();
+ if (ret < 0)
+ return ret;
+ ret = n800_auto_sleep_regulators();
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static struct menelaus_platform_data n800_menelaus_platform_data = {
+ .late_init = n800_menelaus_init,
+};
+
+void __init n800_pm_init(void)
+{
+ menelaus_set_platform_data(&n800_menelaus_platform_data);
+}
+
+#else
+
+void __init n800_pm_init(void)
+{
+}
+
+#endif
+
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800-usb.c
@@ -0,0 +1,102 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-n800-usb.c
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/gpio.h>
+
+#define TUSB_ASYNC_CS 1
+#define TUSB_SYNC_CS 4
+#define GPIO_TUSB_INT 58
+#define GPIO_TUSB_ENABLE 0
+
+static int tusb_set_power(int state);
+
+#if defined(CONFIG_USB_MUSB_OTG)
+# define BOARD_MODE MUSB_OTG
+#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
+# define BOARD_MODE MUSB_PERIPHERAL
+#else /* defined(CONFIG_USB_MUSB_HOST) */
+# define BOARD_MODE MUSB_HOST
+#endif
+
+static struct musb_hdrc_platform_data tusb_data = {
+ .mode = BOARD_MODE,
+ .multipoint = 1,
+ .set_power = tusb_set_power,
+ .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
+};
+
+/*
+ * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
+ * 1.5 V voltage regulators of PM companion chip. Companion chip will then
+ * provide then PGOOD signal to TUSB6010 which will release it from reset.
+ */
+static int tusb_set_power(int state)
+{
+ int i, retval = 0;
+
+ if (state) {
+ omap_set_gpio_dataout(GPIO_TUSB_ENABLE, 1);
+ msleep(1);
+
+ /* Wait until TUSB6010 pulls INT pin down */
+ i = 100;
+ while (i && omap_get_gpio_datain(GPIO_TUSB_INT)) {
+ msleep(1);
+ i--;
+ }
+
+ if (!i) {
+ printk(KERN_ERR "tusb: powerup failed\n");
+ retval = -ENODEV;
+ }
+ } else {
+ omap_set_gpio_dataout(GPIO_TUSB_ENABLE, 0);
+ msleep(10);
+ }
+
+ return retval;
+}
+
+void __init n800_usb_init(void)
+{
+ int ret = 0;
+ static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
+
+ /* PM companion chip power control pin */
+ ret = omap_request_gpio(GPIO_TUSB_ENABLE);
+ if (ret != 0) {
+ printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
+ GPIO_TUSB_ENABLE);
+ return;
+ }
+ omap_set_gpio_direction(GPIO_TUSB_ENABLE, 0);
+
+ tusb_set_power(0);
+
+ ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
+ TUSB_ASYNC_CS, TUSB_SYNC_CS,
+ GPIO_TUSB_INT, 0x3f);
+ if (ret != 0)
+ goto err;
+
+ printk(announce);
+
+ return;
+
+err:
+ omap_free_gpio(GPIO_TUSB_ENABLE);
+}
--- /dev/null
+++ b/arch/arm/mach-omap2/board-n800.c
@@ -0,0 +1,515 @@
+/*
+ * linux/arch/arm/mach-omap/omap2/board-n800.c
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Juha Yrjola <juha.yrjola@xxxxxxxxx>
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/tsc2301.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/usb.h>
+#include <asm/arch/board.h>
+#include <asm/arch/common.h>
+#include <asm/arch/mcspi.h>
+#include <asm/arch/menelaus.h>
+#include <asm/arch/lcd_mipid.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio-switch.h>
+#include <asm/arch/omapfb.h>
+#include <asm/arch/blizzard.h>
+
+#include <../drivers/cbus/tahvo.h>
+
+#define N800_BLIZZARD_POWERDOWN_GPIO 15
+#define N800_STI_GPIO 62
+#define N800_CAM_SENSOR_RESET_GPIO 53
+#define N800_KEYB_IRQ_GPIO 109
+
+static void __init nokia_n800_init_irq(void)
+{
+ omap2_init_common_hw();
+ omap_init_irq();
+ omap_gpio_init();
+
+#ifdef CONFIG_OMAP_STI
+ if (omap_request_gpio(N800_STI_GPIO) < 0) {
+ printk(KERN_ERR "Failed to request GPIO %d for STI\n",
+ N800_STI_GPIO);
+ return;
+ }
+
+ omap_set_gpio_direction(N800_STI_GPIO, 0);
+ omap_set_gpio_dataout(N800_STI_GPIO, 0);
+#endif
+}
+
+#if defined(CONFIG_MENELAUS) && defined(CONFIG_SENSORS_TMP105)
+
+static int n800_tmp105_set_power(int enable)
+{
+ return menelaus_set_vaux(enable ? 2800 : 0);
+}
+
+#else
+
+#define n800_tmp105_set_power NULL
+
+#endif
+
+static struct omap_uart_config n800_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 2),
+};
+
+#include "../../../drivers/cbus/retu.h"
+
+static struct omap_fbmem_config n800_fbmem0_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config n800_fbmem1_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_fbmem_config n800_fbmem2_config __initdata = {
+ .size = 752 * 1024,
+};
+
+static struct omap_tmp105_config n800_tmp105_config __initdata = {
+ .tmp105_irq_pin = 125,
+ .set_power = n800_tmp105_set_power,
+};
+
+static void mipid_shutdown(struct mipid_platform_data *pdata)
+{
+ if (pdata->nreset_gpio != -1) {
+ pr_info("shutdown LCD\n");
+ omap_set_gpio_dataout(pdata->nreset_gpio, 0);
+ msleep(120);
+ }
+}
+
+static struct mipid_platform_data n800_mipid_platform_data = {
+ .shutdown = mipid_shutdown,
+};
+
+static void __init mipid_dev_init(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+ n800_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
+ n800_mipid_platform_data.data_lines = conf->data_lines;
+ }
+}
+
+static struct {
+ struct clk *sys_ck;
+} blizzard;
+
+static int blizzard_get_clocks(void)
+{
+ blizzard.sys_ck = clk_get(0, "osc_ck");
+ if (IS_ERR(blizzard.sys_ck)) {
+ printk(KERN_ERR "can't get Blizzard clock\n");
+ return PTR_ERR(blizzard.sys_ck);
+ }
+ return 0;
+}
+
+static unsigned long blizzard_get_clock_rate(struct device *dev)
+{
+ return clk_get_rate(blizzard.sys_ck);
+}
+
+static void blizzard_enable_clocks(int enable)
+{
+ if (enable)
+ clk_enable(blizzard.sys_ck);
+ else
+ clk_disable(blizzard.sys_ck);
+}
+
+static void blizzard_power_up(struct device *dev)
+{
+ /* Vcore to 1.475V */
+ tahvo_set_clear_reg_bits(0x07, 0, 0xf);
+ msleep(10);
+
+ blizzard_enable_clocks(1);
+ omap_set_gpio_dataout(N800_BLIZZARD_POWERDOWN_GPIO, 1);
+}
+
+static void blizzard_power_down(struct device *dev)
+{
+ omap_set_gpio_dataout(N800_BLIZZARD_POWERDOWN_GPIO, 0);
+ blizzard_enable_clocks(0);
+
+ /* Vcore to 1.005V */
+ tahvo_set_clear_reg_bits(0x07, 0xf, 0);
+}
+
+static struct blizzard_platform_data n800_blizzard_data = {
+ .power_up = blizzard_power_up,
+ .power_down = blizzard_power_down,
+ .get_clock_rate = blizzard_get_clock_rate,
+ .te_connected = 1,
+};
+
+static void __init blizzard_dev_init(void)
+{
+ int r;
+
+ r = omap_request_gpio(N800_BLIZZARD_POWERDOWN_GPIO);
+ if (r < 0)
+ return;
+ omap_set_gpio_direction(N800_BLIZZARD_POWERDOWN_GPIO, 0);
+ omap_set_gpio_dataout(N800_BLIZZARD_POWERDOWN_GPIO, 1);
+
+ blizzard_get_clocks();
+ omapfb_set_ctrl_platform_data(&n800_blizzard_data);
+}
+
+#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_VIDEO_CAMERA_SENSOR_TCM825X) && \
+ defined(CONFIG_MENELAUS)
+#define SUPPORT_SENSOR
+#endif
+
+#ifdef SUPPORT_SENSOR
+
+static int sensor_okay;
+
+/*
+ * VSIM1 --> CAM_IOVDD --> IOVDD (1.8 V)
+ */
+static int tcm825x_sensor_power_on(void *data)
+{
+ int ret;
+
+ if (!sensor_okay)
+ return -ENODEV;
+
+ /* Set VMEM to 1.5V and VIO to 2.5V */
+ ret = menelaus_set_vmem(1500);
+ if (ret < 0) {
+ /* Try once more, it seems the sensor power up causes
+ * some problems on the I2C bus. */
+ ret = menelaus_set_vmem(1500);
+ if (ret < 0)
+ return ret;
+ }
+ msleep(1);
+
+ ret = menelaus_set_vio(2500);
+ if (ret < 0)
+ return ret;
+
+ /* Set VSim1 on */
+ retu_write_reg(RETU_REG_CTRL_SET, 0x0080);
+ msleep(100);
+
+ omap_set_gpio_dataout(N800_CAM_SENSOR_RESET_GPIO, 1);
+ msleep(1);
+
+ return 0;
+}
+
+static int tcm825x_sensor_power_off(void * data)
+{
+ int ret;
+
+ omap_set_gpio_dataout(N800_CAM_SENSOR_RESET_GPIO, 0);
+ msleep(1);
+
+ /* Set VSim1 off */
+ retu_write_reg(RETU_REG_CTRL_CLR, 0x0080);
+ msleep(1);
+
+ /* Set VIO_MODE to off */
+ ret = menelaus_set_vio(0);
+ if (ret < 0)
+ return ret;
+ msleep(1);
+
+ /* Set VMEM_MODE to off */
+ ret = menelaus_set_vmem(0);
+ if (ret < 0)
+ return ret;
+ msleep(1);
+
+ return 0;
+}
+
+static struct omap_camera_sensor_config n800_sensor_config = {
+ .power_on = tcm825x_sensor_power_on,
+ .power_off = tcm825x_sensor_power_off,
+};
+
+static void __init n800_cam_init(void)
+{
+ int r;
+
+ r = omap_request_gpio(N800_CAM_SENSOR_RESET_GPIO);
+ if (r < 0)
+ return;
+
+ omap_set_gpio_dataout(N800_CAM_SENSOR_RESET_GPIO, 0);
+ omap_set_gpio_direction(N800_CAM_SENSOR_RESET_GPIO, 0);
+
+ sensor_okay = 1;
+}
+
+#else
+
+static inline void n800_cam_init(void) {}
+
+#endif
+
+static struct omap_board_config_kernel n800_config[] = {
+ { OMAP_TAG_UART, &n800_uart_config },
+#ifdef SUPPORT_SENSOR
+ { OMAP_TAG_CAMERA_SENSOR, &n800_sensor_config },
+#endif
+ { OMAP_TAG_FBMEM, &n800_fbmem0_config },
+ { OMAP_TAG_FBMEM, &n800_fbmem1_config },
+ { OMAP_TAG_FBMEM, &n800_fbmem2_config },
+ { OMAP_TAG_TMP105, &n800_tmp105_config },
+};
+
+
+static int n800_get_keyb_irq_state(struct device *dev)
+{
+ return !omap_get_gpio_datain(N800_KEYB_IRQ_GPIO);
+}
+
+static struct tsc2301_platform_data tsc2301_config = {
+ .reset_gpio = 118,
+ .dav_gpio = 103,
+ .pen_int_gpio = 106,
+ .keymap = {
+ -1, /* Event for bit 0 */
+ KEY_UP, /* Event for bit 1 (up) */
+ KEY_F5, /* Event for bit 2 (home) */
+ -1, /* Event for bit 3 */
+ KEY_LEFT, /* Event for bit 4 (left) */
+ KEY_ENTER, /* Event for bit 5 (enter) */
+ KEY_RIGHT, /* Event for bit 6 (right) */
+ -1, /* Event for bit 7 */
+ KEY_ESC, /* Event for bit 8 (cycle) */
+ KEY_DOWN, /* Event for bit 9 (down) */
+ KEY_F4, /* Event for bit 10 (menu) */
+ -1, /* Event for bit 11 */
+ KEY_F8, /* Event for bit 12 (Zoom-) */
+ KEY_F6, /* Event for bit 13 (FS) */
+ KEY_F7, /* Event for bit 14 (Zoom+) */
+ -1, /* Event for bit 15 */
+ },
+ .kp_rep = 0,
+ .get_keyb_irq_state = n800_get_keyb_irq_state,
+};
+
+static void tsc2301_dev_init(void)
+{
+ int gpio = N800_KEYB_IRQ_GPIO;
+
+ if (omap_request_gpio(gpio) < 0) {
+ printk(KERN_ERR "can't get KBIRQ GPIO\n");
+ return;
+ }
+ omap_set_gpio_direction(gpio, 1);
+ tsc2301_config.keyb_int = OMAP_GPIO_IRQ(gpio);
+}
+
+static struct omap2_mcspi_device_config tsc2301_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct omap2_mcspi_device_config cx3110x_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1,
+};
+
+static struct spi_board_info n800_spi_board_info[] __initdata = {
+ [0] = {
+ .modalias = "lcd_mipid",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 4000000,
+ .controller_data= &mipid_mcspi_config,
+ .platform_data = &n800_mipid_platform_data,
+ }, [1] = {
+ .modalias = "cx3110x",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 48000000,
+ .controller_data= &cx3110x_mcspi_config,
+ }, [2] = {
+ .modalias = "tsc2301",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 6000000,
+ .controller_data= &tsc2301_mcspi_config,
+ .platform_data = &tsc2301_config,
+ },
+};
+
+#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
+
+void retu_keypad_led_set_power(struct omap_pwm_led_platform_data *self,
+ int on_off)
+{
+ if (on_off) {
+ retu_write_reg(RETU_REG_CTRL_SET, 1 << 6);
+ msleep(2);
+ retu_write_reg(RETU_REG_CTRL_SET, 1 << 3);
+ } else {
+ retu_write_reg(RETU_REG_CTRL_CLR, (1 << 6) | (1 << 3));
+ }
+}
+
+static struct omap_pwm_led_platform_data n800_keypad_led_data = {
+ .name = "keypad",
+ .intensity_timer = 10,
+ .blink_timer = 9,
+ .set_power = retu_keypad_led_set_power,
+};
+
+static struct platform_device n800_keypad_led_device = {
+ .name = "omap_pwm_led",
+ .id = -1,
+ .dev = {
+ .platform_data = &n800_keypad_led_data,
+ },
+};
+#endif
+
+#if defined(CONFIG_SPI_TSC2301_TOUCHSCREEN)
+static void __init n800_ts_set_config(void)
+{
+ const struct omap_lcd_config *conf;
+
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
+ if (conf != NULL) {
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
+ tsc2301_config.ts_x_plate_ohm = 180;
+ tsc2301_config.ts_hw_avg = 4;
+ tsc2301_config.ts_ignore_last = 1;
+ tsc2301_config.ts_max_pressure = 255;
+ tsc2301_config.ts_stab_time = 100;
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
+ tsc2301_config.ts_x_plate_ohm = 280;
+ tsc2301_config.ts_hw_avg = 16;
+ tsc2301_config.ts_touch_pressure= 215;
+ tsc2301_config.ts_max_pressure = 255;
+ tsc2301_config.ts_ignore_last = 1;
+ } else {
+ printk(KERN_ERR "Unknown panel type, set default "
+ "touchscreen configuration\n");
+ tsc2301_config.ts_x_plate_ohm = 200;
+ tsc2301_config.ts_stab_time = 100;
+ }
+ }
+}
+#else
+static inline void n800_ts_set_config(void)
+{
+}
+#endif
+
+static struct omap_gpio_switch n800_gpio_switches[] __initdata = {
+ {
+ .name = "bat_cover",
+ .gpio = -1,
+ .debounce_rising = 100,
+ .debounce_falling = 0,
+ .notify = n800_mmc_slot1_cover_handler,
+ .notify_data = NULL,
+ }, {
+ .name = "headphone",
+ .gpio = -1,
+ .debounce_rising = 200,
+ .debounce_falling = 200,
+ }, {
+ .name = "cam_act",
+ .gpio = -1,
+ .debounce_rising = 200,
+ .debounce_falling = 200,
+ }, {
+ .name = "cam_turn",
+ .gpio = -1,
+ .debounce_rising = 100,
+ .debounce_falling = 100,
+ },
+};
+
+static struct platform_device *n800_devices[] __initdata = {
+#if defined(CONFIG_CBUS_RETU) && defined(CONFIG_LEDS_OMAP_PWM)
+ &n800_keypad_led_device,
+#endif
+};
+
+static void __init nokia_n800_init(void)
+{
+ platform_add_devices(n800_devices, ARRAY_SIZE(n800_devices));
+ n800_flash_init();
+ n800_mmc_init();
+ n800_bt_init();
+ n800_audio_init(&tsc2301_config);
+ n800_dsp_init();
+ n800_usb_init();
+ n800_cam_init();
+ n800_ts_set_config();
+ spi_register_board_info(n800_spi_board_info,
+ ARRAY_SIZE(n800_spi_board_info));
+ omap_serial_init();
+ mipid_dev_init();
+ blizzard_dev_init();
+ tsc2301_dev_init();
+ omap_register_gpio_switches(n800_gpio_switches,
+ ARRAY_SIZE(n800_gpio_switches));
+ n800_pm_init();
+}
+
+static void __init nokia_n800_map_io(void)
+{
+ omap_board_config = n800_config;
+ omap_board_config_size = ARRAY_SIZE(n800_config);
+
+ omap2_map_common_io();
+}
+
+MACHINE_START(NOKIA_N800, "Nokia N800")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = nokia_n800_map_io,
+ .init_irq = nokia_n800_init_irq,
+ .init_machine = nokia_n800_init,
+ .timer = &omap_timer,
+MACHINE_END
--- a/include/asm-arm/arch-omap/board.h
+++ b/include/asm-arm/arch-omap/board.h
@@ -25,9 +25,12 @@
#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
+#define OMAP_TAG_PARTITION 0x4f0b
+#define OMAP_TAG_TEA5761 0x4f10
+#define OMAP_TAG_TMP105 0x4f11

#define OMAP_TAG_BOOT_REASON 0x4f80
-#define OMAP_TAG_FLASH_PART 0x4f81
+#define OMAP_TAG_FLASH_PART_STR 0x4f81
#define OMAP_TAG_VERSION_STR 0x4f82

struct omap_clock_config {
@@ -139,8 +142,25 @@ struct omap_uart_config {
unsigned int enabled_uarts;
};

+struct omap_tea5761_config {
+ u16 enable_gpio;
+};
+
+/* This cannot be passed from the bootloader */
+struct omap_tmp105_config {
+ u16 tmp105_irq_pin;
+ int (* set_power)(int enable);
+};
+
+struct omap_partition_config {
+ char name[16];
+ unsigned int size;
+ unsigned int offset;
+ /* same as in include/linux/mtd/partitions.h */
+ unsigned int mask_flags;
+};

-struct omap_flash_part_config {
+struct omap_flash_part_str_config {
char part_table[0];
};

--- a/include/asm-arm/arch-omap/board-nokia.h
+++ b/include/asm-arm/arch-omap/board-nokia.h
@@ -11,6 +11,17 @@

#include <linux/types.h>

+extern void __init n800_flash_init(void);
+extern void __init n800_mmc_init(void);
+extern void __init n800_bt_init(void);
+extern void __init n800_audio_init(struct tsc2301_platform_data *);
+extern void __init n800_dsp_init(void);
+extern void __init n800_usb_init(void);
+extern void __init n800_pm_init(void);
+extern int n800_audio_enable(struct dsp_kfunc_device *kdev, int stage);
+extern int n800_audio_disable(struct dsp_kfunc_device *kdev, int stage);
+extern void n800_mmc_slot1_cover_handler(void *arg, int state);
+
#define OMAP_TAG_NOKIA_BT 0x4e01
#define OMAP_TAG_WLAN_CX3110X 0x4e02
#define OMAP_TAG_CBUS 0x4e03


--sy9WyBOsCRoUO165--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/