[PATCH 2/3] cciss: add SG_IO ioctl to cciss
From: Mike Miller (OS Dev)
Date: Tue Apr 10 2007 - 17:01:32 EST
PATCH 2/3
For all of you that think cciss should be a scsi driver here is the patch that
you have been waiting for all these years. This patch actually adds the SG_IO
ioctl to cciss. The primary purpose is for clustering and high-availibilty.
But now anyone can exploit this ioctl in any manner they wish.
Note, SCSI_IOCTL_SEND_COMMAND doesn't work with this patch due to rq->errors
being set incorrectly. Subsequent patch fixes that.
Please consider this for inclusion.
Signed-off-by: Stephen M. Cameron <steve.cameron@xxxxxx>
Signed-off-by: Mike Miller <mike.miller@xxxxxx>
---
linux-2.6.21-rc6/drivers/block/cciss.c | 164 ++++++++++++++++++++++-----------
1 files changed, 111 insertions(+), 53 deletions(-)
diff -puN linux-2.6.21-rc6/drivers/block/cciss.c~cciss_sg_io_ioctl linux-2.6.21-rc6/drivers/block/cciss.c
--- cciss_sg_io/linux-2.6.21-rc6/drivers/block/cciss.c~cciss_sg_io_ioctl 2007-04-10 14:32:26.000000000 -0500
+++ cciss_sg_io-scameron/linux-2.6.21-rc6/drivers/block/cciss.c 2007-04-10 14:32:26.000000000 -0500
@@ -45,6 +45,9 @@
#include <linux/blkdev.h>
#include <linux/genhd.h>
#include <linux/completion.h>
+#include <scsi/sg.h>
+#include <scsi/scsi_ioctl.h>
+#include <linux/cdrom.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
@@ -1152,6 +1155,30 @@ static int cciss_ioctl(struct inode *ino
kfree(ioc);
return status;
}
+
+ /* scsi_cmd_ioctl handles these, below, though some are not */
+ /* very meaningful for cciss. SG_IO is the main one people want. */
+
+ case SG_GET_VERSION_NUM:
+ case SG_SET_TIMEOUT:
+ case SG_GET_TIMEOUT:
+ case SG_GET_RESERVED_SIZE:
+ case SG_SET_RESERVED_SIZE:
+ case SG_EMULATED_HOST:
+ case SG_IO:
+ case SCSI_IOCTL_SEND_COMMAND:
+ return scsi_cmd_ioctl(filep, disk, cmd, argp);
+
+ /* scsi_cmd_ioctl would normally handle these, below, but */
+ /* they aren't a good fit for cciss, as CD-ROMs are */
+ /* not supported, and we don't have any bus/target/lun */
+ /* which we present to the kernel. */
+
+ case CDROM_SEND_PACKET:
+ case CDROMCLOSETRAY:
+ case CDROMEJECT:
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
default:
return -ENOTTY;
}
@@ -2336,6 +2363,44 @@ static inline void resend_cciss_cmd(ctlr
start_io(h);
}
+static inline int evaluate_target_status(CommandList_struct *cmd)
+{
+ unsigned char sense_key;
+ int status = 0; /* 0 means bad, 1 means good. */
+
+ if (cmd->err_info->ScsiStatus != 0x02) { /* not check condition? */
+ if (!blk_pc_request(cmd->rq))
+ printk(KERN_WARNING "cciss: cmd %p "
+ "has SCSI Status 0x%x\n",
+ cmd, cmd->err_info->ScsiStatus);
+ return status;
+ }
+
+ /* check the sense key */
+ sense_key = 0xf & cmd->err_info->SenseInfo[2];
+ /* no status or recovered error */
+ if ((sense_key == 0x0) || (sense_key == 0x1))
+ status = 1;
+
+ if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
+ if (status == 0)
+ printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
+ " sense key = 0x%x\n", cmd, sense_key);
+ return status;
+ }
+
+ /* SG_IO or similar, copy sense data back */
+ if (cmd->rq->sense) {
+ if (cmd->rq->sense_len > cmd->err_info->SenseLen)
+ cmd->rq->sense_len = cmd->err_info->SenseLen;
+ memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
+ cmd->rq->sense_len);
+ } else
+ cmd->rq->sense_len = 0;
+
+ return status;
+}
+
/* checks the status of the job and calls complete buffers to mark all
* buffers for the completed job. Note that this function does not need
* to hold the hba/queue lock.
@@ -2353,37 +2418,22 @@ static inline void complete_command(ctlr
goto after_error_processing;
switch (cmd->err_info->CommandStatus) {
- unsigned char sense_key;
case CMD_TARGET_STATUS:
- status = 0;
-
- if (cmd->err_info->ScsiStatus == 0x02) {
- printk(KERN_WARNING "cciss: cmd %p "
- "has CHECK CONDITION "
- " byte 2 = 0x%x\n", cmd,
- cmd->err_info->SenseInfo[2]
- );
- /* check the sense key */
- sense_key = 0xf & cmd->err_info->SenseInfo[2];
- /* no status or recovered error */
- if ((sense_key == 0x0) || (sense_key == 0x1)) {
- status = 1;
- }
- } else {
- printk(KERN_WARNING "cciss: cmd %p "
- "has SCSI Status 0x%x\n",
- cmd, cmd->err_info->ScsiStatus);
- }
+ status = evaluate_target_status(cmd);
break;
case CMD_DATA_UNDERRUN:
- printk(KERN_WARNING "cciss: cmd %p has"
- " completed with data underrun "
- "reported\n", cmd);
+ if (blk_fs_request(cmd->rq)) {
+ printk(KERN_WARNING "cciss: cmd %p has"
+ " completed with data underrun "
+ "reported\n", cmd);
+ cmd->rq->data_len = cmd->err_info->ResidualCnt;
+ }
break;
case CMD_DATA_OVERRUN:
- printk(KERN_WARNING "cciss: cmd %p has"
- " completed with data overrun "
- "reported\n", cmd);
+ if (blk_fs_request(cmd->rq))
+ printk(KERN_WARNING "cciss: cmd %p has"
+ " completed with data overrun "
+ "reported\n", cmd);
break;
case CMD_INVALID:
printk(KERN_WARNING "cciss: cmd %p is "
@@ -2447,9 +2497,9 @@ after_error_processing:
resend_cciss_cmd(h, cmd);
return;
}
-
- cmd->rq->completion_data = cmd;
+ cmd->rq->data_len = 0;
cmd->rq->errors = status;
+ cmd->rq->completion_data = cmd;
blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
blk_complete_request(cmd->rq);
}
@@ -2543,32 +2593,40 @@ static void do_cciss_request(request_que
#endif /* CCISS_DEBUG */
c->Header.SGList = c->Header.SGTotal = seg;
- if(h->cciss_read == CCISS_READ_10) {
- c->Request.CDB[1] = 0;
- c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
- c->Request.CDB[3] = (start_blk >> 16) & 0xff;
- c->Request.CDB[4] = (start_blk >> 8) & 0xff;
- c->Request.CDB[5] = start_blk & 0xff;
- c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
- c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[8] = creq->nr_sectors & 0xff;
- c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ if (likely(blk_fs_request(creq))) {
+ if(h->cciss_read == CCISS_READ_10) {
+ c->Request.CDB[1] = 0;
+ c->Request.CDB[2] = (start_blk >> 24) & 0xff; //MSB
+ c->Request.CDB[3] = (start_blk >> 16) & 0xff;
+ c->Request.CDB[4] = (start_blk >> 8) & 0xff;
+ c->Request.CDB[5] = start_blk & 0xff;
+ c->Request.CDB[6] = 0; // (sect >> 24) & 0xff; MSB
+ c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
+ c->Request.CDB[8] = creq->nr_sectors & 0xff;
+ c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
+ } else {
+ c->Request.CDBLen = 16;
+ c->Request.CDB[1]= 0;
+ c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB
+ c->Request.CDB[3]= (start_blk >> 48) & 0xff;
+ c->Request.CDB[4]= (start_blk >> 40) & 0xff;
+ c->Request.CDB[5]= (start_blk >> 32) & 0xff;
+ c->Request.CDB[6]= (start_blk >> 24) & 0xff;
+ c->Request.CDB[7]= (start_blk >> 16) & 0xff;
+ c->Request.CDB[8]= (start_blk >> 8) & 0xff;
+ c->Request.CDB[9]= start_blk & 0xff;
+ c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
+ c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
+ c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
+ c->Request.CDB[13]= creq->nr_sectors & 0xff;
+ c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ }
+ } else if (blk_pc_request(creq)) {
+ c->Request.CDBLen = creq->cmd_len;
+ memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
} else {
- c->Request.CDBLen = 16;
- c->Request.CDB[1]= 0;
- c->Request.CDB[2]= (start_blk >> 56) & 0xff; //MSB
- c->Request.CDB[3]= (start_blk >> 48) & 0xff;
- c->Request.CDB[4]= (start_blk >> 40) & 0xff;
- c->Request.CDB[5]= (start_blk >> 32) & 0xff;
- c->Request.CDB[6]= (start_blk >> 24) & 0xff;
- c->Request.CDB[7]= (start_blk >> 16) & 0xff;
- c->Request.CDB[8]= (start_blk >> 8) & 0xff;
- c->Request.CDB[9]= start_blk & 0xff;
- c->Request.CDB[10]= (creq->nr_sectors >> 24) & 0xff;
- c->Request.CDB[11]= (creq->nr_sectors >> 16) & 0xff;
- c->Request.CDB[12]= (creq->nr_sectors >> 8) & 0xff;
- c->Request.CDB[13]= creq->nr_sectors & 0xff;
- c->Request.CDB[14] = c->Request.CDB[15] = 0;
+ printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
+ BUG();
}
spin_lock_irq(q->queue_lock);
_
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/