Linux version 2.6.21 (root@starlake) (gcc version 4.1.2) #1 SMP PREEMPT Fri Apr 27 13:56:52 CEST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009ec00 end: 000000000009ec00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009ec00 size: 0000000000061400 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007e255000 end: 000000007e355000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007e355000 size: 00000000000b9000 end: 000000007e40e000 type: 4 copy_e820_map() start: 000000007e40e000 size: 0000000001634000 end: 000000007fa42000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fa42000 size: 0000000000058000 end: 000000007fa9a000 type: 2 copy_e820_map() start: 000000007fa9a000 size: 0000000000036000 end: 000000007fad0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fad0000 size: 000000000004a000 end: 000000007fb1a000 type: 4 copy_e820_map() start: 000000007fb1a000 size: 0000000000012000 end: 000000007fb2c000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fb2c000 size: 000000000000e000 end: 000000007fb3a000 type: 3 copy_e820_map() start: 000000007fb3a000 size: 00000000000c6000 end: 000000007fc00000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fc00000 size: 0000000000400000 end: 0000000080000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000ffc00000 size: 000000000000c000 end: 00000000ffc0c000 type: 2 BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007e355000 (usable) BIOS-e820: 000000007e355000 - 000000007e40e000 (ACPI NVS) BIOS-e820: 000000007e40e000 - 000000007fa42000 (usable) BIOS-e820: 000000007fa42000 - 000000007fa9a000 (reserved) BIOS-e820: 000000007fa9a000 - 000000007fad0000 (usable) BIOS-e820: 000000007fad0000 - 000000007fb1a000 (ACPI NVS) BIOS-e820: 000000007fb1a000 - 000000007fb2c000 (usable) BIOS-e820: 000000007fb2c000 - 000000007fb3a000 (ACPI data) BIOS-e820: 000000007fb3a000 - 000000007fc00000 (usable) BIOS-e820: 000000007fc00000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000ffc00000 - 00000000ffc0c000 (reserved) 1148MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fd180 Entering add_active_range(0, 0, 523264) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 523264 early_node_map[1] active PFN ranges 0: 0 -> 523264 On node 0 totalpages: 523264 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2296 pages used for memmap HighMem zone: 291592 pages, LIFO batch:31 DMI 2.5 present. ACPI: RSDP 000F03B0, 0024 (r2 INTEL ) ACPI: XSDT 7FB39120, 004C (r1 INTEL S5000PSL 0 INTL 1000013) ACPI: FACP 7FB36000, 00F4 (r3 INTEL S5000PSL 0 INTL 1000013) ACPI: DSDT 7FB2F000, 536F (r2 INTEL S5000PSL 1 INTL 1000013) ACPI: FACS 7FAD0000, 0040 ACPI: APIC 7FB35000, 00C8 (r1 INTEL S5000PSL 0 INTL 1000013) ACPI: SPCR 7FB2E000, 0050 (r1 INTEL S5000PSL 0 INTL 1000013) ACPI: HPET 7FB2D000, 0038 (r1 INTEL S5000PSL 1 INTL 1000013) ACPI: MCFG 7FB2C000, 003C (r1 INTEL S5000PSL 1 INTL 1000013) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x84] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x85] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x86] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x87] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Built 1 zonelists. Total pages: 519176 Kernel command line: bzImage-2.6.21-32-starlake root=/dev/sda1 parport=auto video=atifb:1152x864@75 Unknown boot option `bzImage-2.6.21-32-starlake': ignoring mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fec80000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0467000 soft=c0463000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1995.207 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2069404k/2093056k available (2386k kernel code, 21108k reserved, 826k data, 212k init, 1174108k highmem) virtual kernel memory layout: fixmap : 0xfff83000 - 0xfffff000 ( 496 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0429000 - 0xc045e000 ( 212 kB) .data : 0xc03548c3 - 0xc04232ac ( 826 kB) .text : 0xc0100000 - 0xc03548c3 (2386 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 3992.92 BogoMIPS (lpj=7985844) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 13k freed ACPI: Core revision 20070126 CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c0468000 soft=c0464000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=7980047) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 Booting processor 2/6 eip 2000 CPU 2 irqstacks, hard=c0469000 soft=c0465000 Initializing CPU#2 Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980140) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 Booting processor 3/7 eip 2000 CPU 3 irqstacks, hard=c046a000 soft=c0466000 Initializing CPU#3 Calibrating delay using timer specific routine.. 3990.06 BogoMIPS (lpj=7980138) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0004e33d 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0004e33d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 Total of 4 processors activated (15963.08 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. checking TSC synchronization [CPU#0 -> CPU#2]: passed. checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs migration_cost=40,8970 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:0c:0c.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC32._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIO._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE.PCIW.PCIQ._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIF._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized libata version 2.20 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved pnp: 00:01: iomem range 0xfec00000-0xfecfffff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x800-0x87f has been reserved Time: tsc clocksource has been installed. Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #2 Switched to NOHz mode on CPU #3 PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: f8000000-f88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-2fff MEM window: f8000000-f88fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-2fff MEM window: f8000000-f89fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: f8a00000-f8afffff PREFETCH window: f0000000-f7ffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.28 [Flags: R/O]. io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:01:00.0 to 64 Allocate Port Service[0000:01:00.0:pcie10] Allocate Port Service[0000:01:00.0:pcie11] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie20] Allocate Port Service[0000:02:00.0:pcie21] PCI: Setting latency timer of device 0000:02:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:02.0:pcie20] Allocate Port Service[0000:02:02.0:pcie21] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:03.0:pcie01 failed with error 1 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:04.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:05.0:pcie01 failed with error 2 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:06.0:pcie01 failed with error 2 aer_init: AER service init fails - No ACPI _OSC support aer: probe of 0000:00:07.0:pcie01 failed with error 1 ACPI: PCI Interrupt 0000:0c:0c.0[A] -> GSI 17 (level, low) -> IRQ 18 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=200.00 Mhz, System=200.00 MHz radeonfb: PLL min 20000 max 50000 radeonfb: Reversed TMDS detected i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-1: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. i2c_adapter i2c-3: unable to read EDID block. radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type no found Display is GTF capable Console: switching to colour frame buffer device 160x64 radeonfb (0000:0c:0c.0): ATI Radeon Q^ input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) lp: driver loaded but no devices found Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.25.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 1 RAM disks of 65536K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:0f:51:68 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.1 to 64 e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:15:17:0f:51:69 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ahci 0000:00:1f.2: version 2.1 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part ata1: SATA max UDMA/133 cmd 0xf881e100 ctl 0x00000000 bmdma 0x00000000 irq 20 ata2: SATA max UDMA/133 cmd 0xf881e180 ctl 0x00000000 bmdma 0x00000000 irq 20 ata3: SATA max UDMA/133 cmd 0xf881e200 ctl 0x00000000 bmdma 0x00000000 irq 20 ata4: SATA max UDMA/133 cmd 0xf881e280 ctl 0x00000000 bmdma 0x00000000 irq 20 ata5: SATA max UDMA/133 cmd 0xf881e300 ctl 0x00000000 bmdma 0x00000000 irq 20 ata6: SATA max UDMA/133 cmd 0xf881e380 ctl 0x00000000 bmdma 0x00000000 irq 20 scsi0 : ahci ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: SAMSUNG HD080HJ, WT100-41, max UDMA7 ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ WT10 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda ata_piix 0000:00:1f.1: version 2.10ac1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata7: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000130c0 irq 14 ata8: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000130c8 irq 15 scsi6 : ata_piix ata7.00: ATAPI, max UDMA/33 ata7.00: configured for UDMA/33 scsi7 : ata_piix ATA: abnormal status 0x7F on port 0x00010177 scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 6:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf8b00400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x000030a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00003080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x00003040 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 4-1: new low speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:08.0 to 64 Intel(R) I/OAT DMA Engine found, 4 channels TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI Shortcut mode BIOS EDD facility v0.16 2004-Jun-25, 1 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 212k freed Write protecting the kernel read-only data: 597k Adding 62500872k swap on /dev/sda3. Priority:-1 extents:1 across:62500872k EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO