[PATCH 7/21] Char: cyclades, printk cleanups

From: Jiri Slaby
Date: Sun Apr 29 2007 - 16:58:15 EST

cyclades, printk cleanups

- add printk KERN_ levels to each printk
- substitute printk with dev_* when device struct is available

Signed-off-by: Jiri Slaby <jirislaby@xxxxxxxxx>

---
commit af4b7e8923a0ea9ca7427667977500484a3ca661
tree b9e0a44ecc03ce00874229fa218e5fa16a0d1a46
parent 34705e1c32f10d42a1d4b7e2b3da93321bd20625
author Jiri Slaby <jirislaby@xxxxxxxxx> Wed, 25 Apr 2007 19:01:57 +0200
committer Jiri Slaby <jirislaby@xxxxxxxxx> Sat, 28 Apr 2007 23:46:56 +0200

drivers/char/cyclades.c | 530 ++++++++++++++++++++---------------------------
1 files changed, 220 insertions(+), 310 deletions(-)

diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index c12dbb1..7a15300 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -860,21 +860,21 @@ static inline int serial_paranoia_check(struct cyclades_port *info,
{
#ifdef SERIAL_PARANOIA_CHECK
if (!info) {
- printk("cyc Warning: null cyclades_port for (%s) in %s\n",
- name, routine);
+ printk(KERN_WARNING "cyc Warning: null cyclades_port for (%s) "
+ "in %s\n", name, routine);
return 1;
}

if ((long)info < (long)(&cy_port[0]) ||
(long)(&cy_port[NR_PORTS]) < (long)info) {
- printk("cyc Warning: cyclades_port out of range for (%s) in "
- "%s\n", name, routine);
+ printk(KERN_WARNING "cyc Warning: cyclades_port out of range "
+ "for (%s) in %s\n", name, routine);
return 1;
}

if (info->magic != CYCLADES_MAGIC) {
- printk("cyc Warning: bad magic number for serial struct (%s) "
- "in %s\n", name, routine);
+ printk(KERN_WARNING "cyc Warning: bad magic number for serial "
+ "struct (%s) in %s\n", name, routine);
return 1;
}
#endif
@@ -1047,7 +1047,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,

if (status & CySRReceive) { /* reception interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: rcvd intr, chip %d\n\r", chip);
+ printk(KERN_DEBUG "cyy_interrupt: rcvd intr, chip %d\n", chip);
#endif
/* determine the channel & change to that context */
spin_lock(&cinfo->card_lock);
@@ -1212,7 +1212,7 @@ static void cyy_intr_chip(struct cyclades_card *cinfo, int chip,
is empty, we know we can always stuff a dozen
characters. */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: xmit intr, chip %d\n\r", chip);
+ printk(KERN_DEBUG "cyy_interrupt: xmit intr, chip %d\n", chip);
#endif

/* determine the channel & change to that context */
@@ -1436,7 +1436,7 @@ static irqreturn_t cyy_interrupt(int irq, void *dev_id)

if ((cinfo = (struct cyclades_card *)dev_id) == 0) {
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyy_interrupt: spurious interrupt %d\n\r", irq);
+ printk(KERN_DEBUG "cyy_interrupt: spurious interrupt %d\n",irq);
#endif
return IRQ_NONE; /* spurious interrupt */
}
@@ -1820,8 +1820,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
case C_CM_INTBACK2:
/* Reception Interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: rcvd intr, card %d, "
- "port %ld\n\r", info->card, channel);
+ printk(KERN_DEBUG "cyz_interrupt: rcvd intr, card %d, "
+ "port %ld\n", info->card, channel);
#endif
cyz_handle_rx(info, ch_ctrl, buf_ctrl);
break;
@@ -1830,8 +1830,8 @@ static void cyz_handle_cmd(struct cyclades_card *cinfo)
case C_CM_INTBACK:
/* Transmission Interrupt */
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: xmit intr, card %d, "
- "port %ld\n\r", info->card, channel);
+ printk(KERN_DEBUG "cyz_interrupt: xmit intr, card %d, "
+ "port %ld\n", info->card, channel);
#endif
cyz_handle_tx(info, ch_ctrl, buf_ctrl);
break;
@@ -1856,14 +1856,15 @@ static irqreturn_t cyz_interrupt(int irq, void *dev_id)

if ((cinfo = (struct cyclades_card *)dev_id) == 0) {
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: spurious interrupt %d\n\r", irq);
+ printk(KERN_DEBUG "cyz_interrupt: spurious interrupt %d\n",irq);
#endif
return IRQ_NONE; /* spurious interrupt */
}

if (!ISZLOADED(*cinfo)) {
#ifdef CY_DEBUG_INTERRUPTS
- printk("cyz_interrupt: board not yet loaded (IRQ%d).\n\r", irq);
+ printk(KERN_DEBUG "cyz_interrupt: board not yet loaded "
+ "(IRQ%d).\n", irq);
#endif
return IRQ_NONE;
}
@@ -1885,7 +1886,7 @@ static void cyz_rx_restart(unsigned long arg)
CY_LOCK(info, flags);
retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK2, 0L);
if (retval != 0) {
- printk("cyc:cyz_rx_restart retval on ttyC%d was %x\n",
+ printk(KERN_ERR "cyc:cyz_rx_restart retval on ttyC%d was %x\n",
info->line, retval);
}
cyz_rx_full_timer[info->line].function = NULL;
@@ -2000,10 +2001,9 @@ static int startup(struct cyclades_port *info)
(cy_chip_offset[chip] << index);

#ifdef CY_DEBUG_OPEN
- printk("cyc startup card %d, chip %d, channel %d, "
- "base_addr %lx\n",
- card, chip, channel, (long)base_addr);
- /**/
+ printk(KERN_DEBUG "cyc startup card %d, chip %d, channel %d, "
+ "base_addr %p\n",
+ card, chip, channel, base_addr);
#endif
CY_LOCK(info, flags);

@@ -2021,8 +2021,8 @@ static int startup(struct cyclades_port *info)
cy_writeb(base_addr + (CyMSVR2 << index), CyDTR);

#ifdef CY_DEBUG_DTR
- printk("cyc:startup raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:startup raising DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -2063,9 +2063,8 @@ static int startup(struct cyclades_port *info)
ch_ctrl = zfw_ctrl->ch_ctrl;

#ifdef CY_DEBUG_OPEN
- printk("cyc startup Z card %d, channel %d, base_addr %lx\n",
- card, channel, (long)base_addr);
- /**/
+ printk(KERN_DEBUG "cyc startup Z card %d, channel %d, "
+ "base_addr %p\n", card, channel, base_addr);
#endif
CY_LOCK(info, flags);

@@ -2091,16 +2090,16 @@ static int startup(struct cyclades_port *info)

retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
if (retval != 0) {
- printk("cyc:startup(1) retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:startup(1) retval on ttyC%d was "
+ "%x\n", info->line, retval);
}

/* Flush RX buffers before raising DTR and RTS */
retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_RX,
0L);
if (retval != 0) {
- printk("cyc:startup(2) retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:startup(2) retval on ttyC%d was "
+ "%x\n", info->line, retval);
}

/* set timeout !!! */
@@ -2111,11 +2110,11 @@ static int startup(struct cyclades_port *info)
retval = cyz_issue_cmd(&cy_card[info->card], channel,
C_CM_IOCTLM, 0L);
if (retval != 0) {
- printk("cyc:startup(3) retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:startup(3) retval on ttyC%d was "
+ "%x\n", info->line, retval);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:startup raising Z DTR\n");
+ printk(KERN_DEBUG "cyc:startup raising Z DTR\n");
#endif

/* enable send, recv, modem !!! */
@@ -2135,7 +2134,7 @@ static int startup(struct cyclades_port *info)
}

#ifdef CY_DEBUG_OPEN
- printk(" cyc startup done\n");
+ printk(KERN_DEBUG "cyc startup done\n");
#endif
return 0;

@@ -2172,8 +2171,8 @@ static void start_xmit(struct cyclades_port *info)
retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_INTBACK,
0L);
if (retval != 0) {
- printk("cyc:start_xmit retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:start_xmit retval on ttyC%d was "
+ "%x\n", info->line, retval);
}
CY_UNLOCK(info, flags);
#else /* CONFIG_CYZ_INTR */
@@ -2206,9 +2205,9 @@ static void shutdown(struct cyclades_port *info)
(cy_chip_offset[chip] << index);

#ifdef CY_DEBUG_OPEN
- printk("cyc shutdown Y card %d, chip %d, channel %d, "
- "base_addr %lx\n",
- card, chip, channel, (long)base_addr);
+ printk(KERN_DEBUG "cyc shutdown Y card %d, chip %d, "
+ "channel %d, base_addr %p\n",
+ card, chip, channel, base_addr);
#endif

CY_LOCK(info, flags);
@@ -2227,8 +2226,8 @@ static void shutdown(struct cyclades_port *info)
cy_writeb(base_addr + (CyMSVR1 << index), ~CyRTS);
cy_writeb(base_addr + (CyMSVR2 << index), ~CyDTR);
#ifdef CY_DEBUG_DTR
- printk("cyc shutdown dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc shutdown dropping DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -2251,8 +2250,8 @@ static void shutdown(struct cyclades_port *info)

base_addr = cy_card[card].base_addr;
#ifdef CY_DEBUG_OPEN
- printk("cyc shutdown Z card %d, channel %d, base_addr %lx\n",
- card, channel, (long)base_addr);
+ printk(KERN_DEBUG "cyc shutdown Z card %d, channel %d, "
+ "base_addr %p\n", card, channel, base_addr);
#endif

firm_id = base_addr + ID_ADDRESS;
@@ -2281,11 +2280,11 @@ static void shutdown(struct cyclades_port *info)
retval = cyz_issue_cmd(&cy_card[info->card], channel,
C_CM_IOCTLM, 0L);
if (retval != 0) {
- printk("cyc:shutdown retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR"cyc:shutdown retval on ttyC%d "
+ "was %x\n", info->line, retval);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:shutdown dropping Z DTR\n");
+ printk(KERN_DEBUG "cyc:shutdown dropping Z DTR\n");
#endif
}

@@ -2298,7 +2297,7 @@ static void shutdown(struct cyclades_port *info)
}

#ifdef CY_DEBUG_OPEN
- printk(" cyc shutdown done\n");
+ printk(KERN_DEBUG "cyc shutdown done\n");
#endif
} /* shutdown */

@@ -2352,17 +2351,16 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
retval = 0;
add_wait_queue(&info->open_wait, &wait);
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready before block: ttyC%d, count = %d\n",
- info->line, info->count);
- /**/
+ printk(KERN_DEBUG "cyc block_til_ready before block: ttyC%d, "
+ "count = %d\n", info->line, info->count);
#endif
CY_LOCK(info, flags);
if (!tty_hung_up_p(filp))
info->count--;
CY_UNLOCK(info, flags);
#ifdef CY_DEBUG_COUNT
- printk("cyc block_til_ready: (%d): decrementing count to %d\n",
- current->pid, info->count);
+ printk(KERN_DEBUG "cyc block_til_ready: (%d): decrementing count to "
+ "%d\n", current->pid, info->count);
#endif
info->blocked_open++;

@@ -2382,8 +2380,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
cy_writeb(base_addr + (CyMSVR2 << index),
CyDTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:block_til_ready raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:block_til_ready raising "
+ "DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -2414,10 +2413,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
break;
}
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready blocking: ttyC%d, "
- "count = %d\n",
- info->line, info->count);
- /**/
+ printk(KERN_DEBUG "cyc block_til_ready blocking: "
+ "ttyC%d, count = %d\n",
+ info->line, info->count);
#endif
schedule();
}
@@ -2448,12 +2446,13 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
retval = cyz_issue_cmd(&cy_card[info->card],
channel, C_CM_IOCTLM, 0L);
if (retval != 0) {
- printk("cyc:block_til_ready retval on "
- "ttyC%d was %x\n",
+ printk(KERN_ERR "cyc:block_til_ready "
+ "retval on ttyC%d was %x\n",
info->line, retval);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:block_til_ready raising Z DTR\n");
+ printk(KERN_DEBUG "cyc:block_til_ready raising "
+ "Z DTR\n");
#endif
}

@@ -2474,10 +2473,9 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
break;
}
#ifdef CY_DEBUG_OPEN
- printk("cyc block_til_ready blocking: ttyC%d, "
- "count = %d\n",
- info->line, info->count);
- /**/
+ printk(KERN_DEBUG "cyc block_til_ready blocking: "
+ "ttyC%d, count = %d\n",
+ info->line, info->count);
#endif
schedule();
}
@@ -2487,15 +2485,14 @@ block_til_ready(struct tty_struct *tty, struct file *filp,
if (!tty_hung_up_p(filp)) {
info->count++;
#ifdef CY_DEBUG_COUNT
- printk("cyc:block_til_ready (%d): incrementing count to %d\n",
- current->pid, info->count);
+ printk(KERN_DEBUG "cyc:block_til_ready (%d): incrementing "
+ "count to %d\n", current->pid, info->count);
#endif
}
info->blocked_open--;
#ifdef CY_DEBUG_OPEN
- printk("cyc:block_til_ready after blocking: ttyC%d, count = %d\n",
- info->line, info->count);
- /**/
+ printk(KERN_DEBUG "cyc:block_til_ready after blocking: ttyC%d, "
+ "count = %d\n", info->line, info->count);
#endif
if (retval)
return retval;
@@ -2535,12 +2532,13 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
Z_FPGA_CHECK(*cinfo)) &&
(ZFIRM_HLT == readl(
&firm_id->signature))) {
- printk("cyc:Cyclades-Z Error: you need an "
- "external power supply for this number "
- "of ports.\n\rFirmware halted.\r\n");
+ printk(KERN_ERR "cyc:Cyclades-Z Error: you "
+ "need an external power supply for "
+ "this number of ports.\nFirmware "
+ "halted.\n");
} else {
- printk("cyc:Cyclades-Z firmware not yet "
- "loaded\n");
+ printk(KERN_ERR "cyc:Cyclades-Z firmware not "
+ "yet loaded\n");
}
return -ENODEV;
}
@@ -2566,8 +2564,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
retval = cyz_issue_cmd(cinfo, 0,
C_CM_IRQ_ENBL, 0L);
if (retval != 0) {
- printk("cyc:IRQ enable retval was %x\n",
- retval);
+ printk(KERN_ERR "cyc:IRQ enable retval "
+ "was %x\n", retval);
}
cinfo->nports =
(int)readl(&board_ctrl->n_channel);
@@ -2580,7 +2578,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
}
#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_open ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_open ttyC%d\n", info->line);
#endif
tty->driver_data = info;
info->tty = tty;
@@ -2588,12 +2586,12 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
return -ENODEV;
}
#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_open ttyC%d, count = %d\n", info->line, info->count);
- /**/
+ printk(KERN_DEBUG "cyc:cy_open ttyC%d, count = %d\n", info->line,
+ info->count);
#endif
info->count++;
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_open (%d): incrementing count to %d\n",
+ printk(KERN_DEBUG "cyc:cy_open (%d): incrementing count to %d\n",
current->pid, info->count);
#endif

@@ -2617,8 +2615,8 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
retval = block_til_ready(tty, filp, info);
if (retval) {
#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_open returning after block_til_ready with %d\n",
- retval);
+ printk(KERN_DEBUG "cyc:cy_open returning after block_til_ready "
+ "with %d\n", retval);
#endif
return retval;
}
@@ -2626,8 +2624,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp)
info->throttle = 0;

#ifdef CY_DEBUG_OPEN
- printk(" cyc:cy_open done\n");
- /**/
+ printk(KERN_DEBUG "cyc:cy_open done\n");
#endif
return 0;
} /* cy_open */
@@ -2678,8 +2675,8 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
if (!timeout || timeout > 2 * info->timeout)
timeout = 2 * info->timeout;
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("In cy_wait_until_sent(%d) check=%lu...", timeout, char_time);
- printk("jiff=%lu...", jiffies);
+ printk(KERN_DEBUG "In cy_wait_until_sent(%d) check=%d, jiff=%lu...",
+ timeout, char_time, jiffies);
#endif
card = info->card;
channel = (info->line) - (cy_card[card].first_line);
@@ -2691,7 +2688,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
cy_card[card].base_addr + (cy_chip_offset[chip] << index);
while (readb(base_addr + (CySRER << index)) & CyTxRdy) {
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("Not clean (jiff=%lu)...", jiffies);
+ printk(KERN_DEBUG "Not clean (jiff=%lu)...", jiffies);
#endif
if (msleep_interruptible(jiffies_to_msecs(char_time)))
break;
@@ -2705,7 +2702,7 @@ static void cy_wait_until_sent(struct tty_struct *tty, int timeout)
/* Run one more char cycle */
msleep_interruptible(jiffies_to_msecs(char_time * 5));
#ifdef CY_DEBUG_WAIT_UNTIL_SENT
- printk("Clean (jiff=%lu)...done\n", jiffies);
+ printk(KERN_DEBUG "Clean (jiff=%lu)...done\n", jiffies);
#endif
}

@@ -2718,7 +2715,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
unsigned long flags;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_close ttyC%d\n", info->line);
+ printk(KERN_DEBUG "cyc:cy_close ttyC%d\n", info->line);
#endif

if (!info || serial_paranoia_check(info, tty->name, "cy_close")) {
@@ -2732,7 +2729,8 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
return;
}
#ifdef CY_DEBUG_OPEN
- printk("cyc:cy_close ttyC%d, count = %d\n", info->line, info->count);
+ printk(KERN_DEBUG "cyc:cy_close ttyC%d, count = %d\n", info->line,
+ info->count);
#endif
if ((tty->count == 1) && (info->count != 1)) {
/*
@@ -2742,17 +2740,17 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
* one, we've got real problems, since it means the
* serial port won't be shutdown.
*/
- printk("cyc:cy_close: bad serial port count; tty->count is 1, "
- "info->count is %d\n", info->count);
+ printk(KERN_ERR "cyc:cy_close: bad serial port count; "
+ "tty->count is 1, info->count is %d\n", info->count);
info->count = 1;
}
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_close at (%d): decrementing count to %d\n",
+ printk(KERN_DEBUG "cyc:cy_close at (%d): decrementing count to %d\n",
current->pid, info->count - 1);
#endif
if (--info->count < 0) {
#ifdef CY_DEBUG_COUNT
- printk("cyc:cyc_close setting count to 0\n");
+ printk(KERN_DEBUG "cyc:cyc_close setting count to 0\n");
#endif
info->count = 0;
}
@@ -2805,8 +2803,8 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
retval = cyz_issue_cmd(&cy_card[info->card], channel,
C_CM_IOCTLW, 0L);
if (retval != 0) {
- printk("cyc:cy_close retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_DEBUG "cyc:cy_close retval on "
+ "ttyC%d was %x\n", info->line, retval);
}
CY_UNLOCK(info, flags);
interruptible_sleep_on(&info->shutdown_wait);
@@ -2838,7 +2836,7 @@ static void cy_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&info->close_wait);

#ifdef CY_DEBUG_OTHER
- printk(" cyc:cy_close done\n");
+ printk(KERN_DEBUG "cyc:cy_close done\n");
#endif

CY_UNLOCK(info, flags);
@@ -2864,7 +2862,7 @@ static int cy_write(struct tty_struct *tty, const unsigned char *buf, int count)
int c, ret = 0;

#ifdef CY_DEBUG_IO
- printk("cyc:cy_write ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_write ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_write")) {
@@ -2914,7 +2912,7 @@ static void cy_put_char(struct tty_struct *tty, unsigned char ch)
unsigned long flags;

#ifdef CY_DEBUG_IO
- printk("cyc:cy_put_char ttyC%d\n", info->line);
+ printk(KERN_DEBUG "cyc:cy_put_char ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_put_char"))
@@ -2946,7 +2944,7 @@ static void cy_flush_chars(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;

#ifdef CY_DEBUG_IO
- printk("cyc:cy_flush_chars ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_flush_chars ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_flush_chars"))
@@ -2971,7 +2969,7 @@ static int cy_write_room(struct tty_struct *tty)
int ret;

#ifdef CY_DEBUG_IO
- printk("cyc:cy_write_room ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_write_room ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_write_room"))
@@ -2997,7 +2995,8 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
if (!IS_CYC_Z(cy_card[card])) {
#endif /* Z_EXT_CHARS_IN_BUFFER */
#ifdef CY_DEBUG_IO
- printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt); /* */
+ printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
+ info->line, info->xmit_cnt);
#endif
return info->xmit_cnt;
#ifdef Z_EXT_CHARS_IN_BUFFER
@@ -3023,7 +3022,8 @@ static int cy_chars_in_buffer(struct tty_struct *tty)
else
char_count = tx_put - tx_get + tx_bufsize;
#ifdef CY_DEBUG_IO
- printk("cyc:cy_chars_in_buffer ttyC%d %d\n", info->line, info->xmit_cnt + char_count); /* */
+ printk(KERN_DEBUG "cyc:cy_chars_in_buffer ttyC%d %d\n",
+ info->line, info->xmit_cnt + char_count);
#endif
return info->xmit_cnt + char_count;
}
@@ -3296,8 +3296,8 @@ static void set_line_char(struct cyclades_port *info)
~CyDTR);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:set_line_char dropping DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -3310,8 +3310,8 @@ static void set_line_char(struct cyclades_port *info)
CyDTR);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:set_line_char raising DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -3426,8 +3426,8 @@ static void set_line_char(struct cyclades_port *info)

retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTL, 0L);
if (retval != 0) {
- printk("cyc:set_line_char retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:set_line_char retval on ttyC%d "
+ "was %x\n", info->line, retval);
}

/* CD sensitivity */
@@ -3441,20 +3441,20 @@ static void set_line_char(struct cyclades_port *info)
cy_writel(&ch_ctrl->rs_control,
readl(&ch_ctrl->rs_control) & ~C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char dropping Z DTR\n");
+ printk(KERN_DEBUG "cyc:set_line_char dropping Z DTR\n");
#endif
} else {
cy_writel(&ch_ctrl->rs_control,
readl(&ch_ctrl->rs_control) | C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_line_char raising Z DTR\n");
+ printk(KERN_DEBUG "cyc:set_line_char raising Z DTR\n");
#endif
}

retval = cyz_issue_cmd(&cy_card[card], channel, C_CM_IOCTLM,0L);
if (retval != 0) {
- printk("cyc:set_line_char(2) retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:set_line_char(2) retval on ttyC%d "
+ "was %x\n", info->line, retval);
}

if (info->tty) {
@@ -3702,8 +3702,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
CyDTR);
}
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info raising DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:set_modem_info raising DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -3722,8 +3722,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
}

#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info dropping DTR\n");
- printk(" status: 0x%x, 0x%x\n",
+ printk(KERN_DEBUG "cyc:set_modem_info dropping DTR\n");
+ printk(KERN_DEBUG " status: 0x%x, 0x%x\n",
readb(base_addr + (CyMSVR1 << index)),
readb(base_addr + (CyMSVR2 << index)));
#endif
@@ -3759,7 +3759,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
readl(&ch_ctrl[channel].rs_control) |
C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info raising Z DTR\n");
+ printk(KERN_DEBUG "cyc:set_modem_info raising "
+ "Z DTR\n");
#endif
CY_UNLOCK(info, flags);
}
@@ -3769,7 +3770,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
readl(&ch_ctrl[channel].rs_control) &
~C_RS_DTR);
#ifdef CY_DEBUG_DTR
- printk("cyc:set_modem_info clearing Z DTR\n");
+ printk(KERN_DEBUG "cyc:set_modem_info clearing "
+ "Z DTR\n");
#endif
CY_UNLOCK(info, flags);
}
@@ -3780,8 +3782,8 @@ cy_tiocmset(struct tty_struct *tty, struct file *file,
retval = cyz_issue_cmd(&cy_card[info->card],
channel, C_CM_IOCTLM, 0L);
if (retval != 0) {
- printk("cyc:set_modem_info retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc:set_modem_info retval on ttyC%d "
+ "was %x\n", info->line, retval);
}
CY_UNLOCK(info, flags);
}
@@ -3831,16 +3833,17 @@ static void cy_break(struct tty_struct *tty, int break_state)
info->line - cy_card[info->card].first_line,
C_CM_SET_BREAK, 0L);
if (retval != 0) {
- printk("cyc:cy_break (set) retval on ttyC%d "
- "was %x\n", info->line, retval);
+ printk(KERN_ERR "cyc:cy_break (set) retval on "
+ "ttyC%d was %x\n", info->line, retval);
}
} else {
retval = cyz_issue_cmd(&cy_card[info->card],
info->line - cy_card[info->card].first_line,
C_CM_CLR_BREAK, 0L);
if (retval != 0) {
- printk("cyc:cy_break (clr) retval on ttyC%d "
- "was %x\n", info->line, retval);
+ printk(KERN_DEBUG "cyc:cy_break (clr) retval "
+ "on ttyC%d was %x\n", info->line,
+ retval);
}
}
}
@@ -4004,7 +4007,8 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
return -ENODEV;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n", info->line, cmd, arg); /* */
+ printk(KERN_DEBUG "cyc:cy_ioctl ttyC%d, cmd = %x arg = %lx\n",
+ info->line, cmd, arg);
#endif

switch (cmd) {
@@ -4164,7 +4168,7 @@ cy_ioctl(struct tty_struct *tty, struct file *file,
}

#ifdef CY_DEBUG_OTHER
- printk(" cyc:cy_ioctl done\n");
+ printk(KERN_DEBUG "cyc:cy_ioctl done\n");
#endif

return ret_val;
@@ -4181,7 +4185,7 @@ static void cy_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
struct cyclades_port *info = tty->driver_data;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_set_termios ttyC%d\n", info->line);
+ printk(KERN_DEBUG "cyc:cy_set_termios ttyC%d\n", info->line);
#endif

if (tty->termios->c_cflag == old_termios->c_cflag &&
@@ -4251,7 +4255,7 @@ static void cy_throttle(struct tty_struct *tty)
#ifdef CY_DEBUG_THROTTLE
char buf[64];

- printk("cyc:throttle %s: %d....ttyC%d\n", tty_name(tty, buf),
+ printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf),
tty->ldisc.chars_in_buffer(tty), info->line);
#endif

@@ -4309,8 +4313,8 @@ static void cy_unthrottle(struct tty_struct *tty)
#ifdef CY_DEBUG_THROTTLE
char buf[64];

- printk("cyc:unthrottle %s: %d....ttyC%d\n", tty_name(tty, buf),
- tty->ldisc.chars_in_buffer(tty), info->line);
+ printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n",
+ tty_name(tty, buf), tty->ldisc.chars_in_buffer(tty),info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) {
@@ -4363,7 +4367,7 @@ static void cy_stop(struct tty_struct *tty)
unsigned long flags;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_stop ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_stop ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_stop"))
@@ -4398,7 +4402,7 @@ static void cy_start(struct tty_struct *tty)
unsigned long flags;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_start ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_start ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_start"))
@@ -4430,7 +4434,7 @@ static void cy_flush_buffer(struct tty_struct *tty)
unsigned long flags;

#ifdef CY_DEBUG_IO
- printk("cyc:cy_flush_buffer ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_flush_buffer ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_flush_buffer"))
@@ -4449,8 +4453,8 @@ static void cy_flush_buffer(struct tty_struct *tty)
retval =
cyz_issue_cmd(&cy_card[card], channel, C_CM_FLUSH_TX, 0L);
if (retval != 0) {
- printk("cyc: flush_buffer retval on ttyC%d was %x\n",
- info->line, retval);
+ printk(KERN_ERR "cyc: flush_buffer retval on ttyC%d "
+ "was %x\n", info->line, retval);
}
CY_UNLOCK(info, flags);
}
@@ -4465,7 +4469,7 @@ static void cy_hangup(struct tty_struct *tty)
struct cyclades_port *info = tty->driver_data;

#ifdef CY_DEBUG_OTHER
- printk("cyc:cy_hangup ttyC%d\n", info->line); /* */
+ printk(KERN_DEBUG "cyc:cy_hangup ttyC%d\n", info->line);
#endif

if (serial_paranoia_check(info, tty->name, "cy_hangup"))
@@ -4476,7 +4480,8 @@ static void cy_hangup(struct tty_struct *tty)
info->event = 0;
info->count = 0;
#ifdef CY_DEBUG_COUNT
- printk("cyc:cy_hangup (%d): setting count to 0\n", current->pid);
+ printk(KERN_DEBUG "cyc:cy_hangup (%d): setting count to 0\n",
+ current->pid);
#endif
info->tty = NULL;
info->flags &= ~ASYNC_NORMAL_ACTIVE;
@@ -4569,7 +4574,7 @@ static void __devinit cy_init_card(struct cyclades_card *cinfo,
if (!timer_pending(&cyz_timerlist)) {
mod_timer(&cyz_timerlist, jiffies + 1);
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z polling initialized\n");
+ printk(KERN_DEBUG "Cyclades-Z polling initialized\n");
#endif
}
#endif /* CONFIG_CYZ_INTR */
@@ -4778,18 +4783,17 @@ static int __init cy_detect_isa(void)
/* find out the board's irq by probing */
cy_isa_irq = detect_isa_irq(cy_isa_address);
if (cy_isa_irq == 0) {
- printk("Cyclom-Y/ISA found at 0x%lx ",
+ printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but the "
+ "IRQ could not be detected.\n",
(unsigned long)cy_isa_address);
- printk("but the IRQ could not be detected.\n");
continue;
}

if ((cy_next_channel + cy_isa_nchan) > NR_PORTS) {
- printk("Cyclom-Y/ISA found at 0x%lx ",
+ printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
+ "more channels are available. Change NR_PORTS "
+ "in cyclades.c and recompile kernel.\n",
(unsigned long)cy_isa_address);
- printk("but no more channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and recompile "
- "kernel.\n");
return nboard;
}
/* fill the next cy_card structure available */
@@ -4798,20 +4802,19 @@ static int __init cy_detect_isa(void)
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/ISA found at 0x%lx ",
+ printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but no "
+ "more cards can be used. Change NR_CARDS in "
+ "cyclades.c and recompile kernel.\n",
(unsigned long)cy_isa_address);
- printk("but no more cards can be used .\n");
- printk("Change NR_CARDS in cyclades.c and recompile "
- "kernel.\n");
return nboard;
}

/* allocate IRQ */
if (request_irq(cy_isa_irq, cyy_interrupt,
IRQF_DISABLED, "Cyclom-Y", &cy_card[j])) {
- printk("Cyclom-Y/ISA found at 0x%lx ",
- (unsigned long)cy_isa_address);
- printk("but could not allocate IRQ#%d.\n", cy_isa_irq);
+ printk(KERN_ERR "Cyclom-Y/ISA found at 0x%lx, but "
+ "could not allocate IRQ#%d.\n",
+ (unsigned long)cy_isa_address, cy_isa_irq);
return nboard;
}

@@ -4825,13 +4828,12 @@ static int __init cy_detect_isa(void)
cy_init_card(&cy_card[j], j);
nboard++;

- /* print message */
- printk("Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d, ",
+ printk(KERN_INFO "Cyclom-Y/ISA #%d: 0x%lx-0x%lx, IRQ%d found: "
+ "%d channels starting from port %d\n",
j + 1, (unsigned long)cy_isa_address,
(unsigned long)(cy_isa_address + (CyISA_Ywin - 1)),
- cy_isa_irq);
- printk("%d channels starting from port %d.\n",
- cy_isa_nchan, cy_next_channel);
+ cy_isa_irq, cy_isa_nchan, cy_next_channel);
+
for (j = cy_next_channel;
j < cy_next_channel + cy_isa_nchan; j++)
tty_register_device(cy_serial_driver, j, NULL);
@@ -4869,20 +4871,15 @@ static int __devinit cy_init_Ze(unsigned long cy_pci_phys0,
cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Ze_win);

readl(&cy_pci_addr0->mail_box_0);
-#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI: relocate winaddr=0x%lx ctladdr=0x%lx\n",
- (ulong)cy_pci_addr2, (ulong)cy_pci_addr0);
- printk("Cyclades-Z/PCI: New Cyclades-Z board. FPGA not "
- "loaded\n");
-#endif
+ dev_dbg(&pdev->dev, "new Cyclades-Z board. FPGA not loaded\n");
+
/* This must be the new Cyclades-Ze/PCI. */
cy_pci_nchan = ZE_V1_NPORTS;

if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
- printk("Cyclades-Ze/PCI found at 0x%lx but no channels "
+ dev_err(&pdev->dev, "Cyclades-Ze/PCI found, but no channels "
"are available.\nChange NR_PORTS in cyclades.c "
- "and recompile kernel.\n",
- (ulong) cy_pci_phys2);
+ "and recompile kernel.\n");
return -EIO;
}

@@ -4892,10 +4889,9 @@ static int __devinit cy_init_Ze(unsigned long cy_pci_phys0,
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclades-Ze/PCI found at 0x%lx but no more "
+ dev_err(&pdev->dev, "Cyclades-Ze/PCI found, but no more "
"cards can be used.\nChange NR_CARDS in "
- "cyclades.c and recompile kernel.\n",
- (ulong) cy_pci_phys2);
+ "cyclades.c and recompile kernel.\n");
return -EIO;
}
#ifdef CONFIG_CYZ_INTR
@@ -4904,10 +4900,7 @@ static int __devinit cy_init_Ze(unsigned long cy_pci_phys0,
if (request_irq(cy_pci_irq, cyz_interrupt,
IRQF_SHARED, "Cyclades-Z",
&cy_card[j])) {
- printk("Cyclom-Ze/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but could not allocate IRQ%d.\n",
- cy_pci_irq);
+ dev_err(&pdev->dev, "could not allocate IRQ.\n");
return -EIO;
}
}
@@ -4923,21 +4916,9 @@ static int __devinit cy_init_Ze(unsigned long cy_pci_phys0,
cy_init_card(&cy_card[j], j);
pci_set_drvdata(pdev, &cy_card[j]);

- /* print message */
-#ifdef CONFIG_CYZ_INTR
- /* don't report IRQ if board is no IRQ */
- if ((cy_pci_irq != 0) && (cy_pci_irq != 255))
- printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
- j + 1, (ulong) cy_pci_phys2,
- (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1), cy_pci_irq);
- else
-#endif /* CONFIG_CYZ_INTR */
- printk("Cyclades-Ze/PCI #%d: 0x%lx-0x%lx, ",
- j + 1, (ulong) cy_pci_phys2,
- (ulong) (cy_pci_phys2 + CyPCI_Ze_win - 1));
+ dev_info(&pdev->dev, "Cyclades-Ze/PCI #%d found: %d channels starting "
+ "from port %d.\n", j + 1, cy_pci_nchan, cy_next_channel);

- printk("%d channels starting from port %d.\n",
- cy_pci_nchan, cy_next_channel);
for (j = cy_next_channel; j < cy_next_channel + cy_pci_nchan; j++)
tty_register_device(cy_serial_driver, j, &pdev->dev);
cy_next_channel += cy_pci_nchan;
@@ -4972,17 +4953,10 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,

if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo ||
device_id == PCI_DEVICE_ID_CYCLOM_Y_Hi) {
-#ifdef CY_PCI_DEBUG
- printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n", cyy_rev_id, cy_pci_irq);
- printk("Cyclom-Y/PCI:found winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
-#endif
+ dev_dbg(&pdev->dev, "Cyclom-Y/PCI found\n");

if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
- printk(" Warning: PCI I/O bit incorrectly "
+ dev_warn(&pdev->dev, "PCI I/O bit incorrectly "
"set. Ignoring it...\n");
pdev->resource[2].flags &= ~IORESOURCE_IO;
}
@@ -4992,47 +4966,33 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
with other drivers accessing it. */
retval = pci_request_regions(pdev, "Cyclom-Y");
if (retval) {
- printk(KERN_ERR "cyclades: failed to reserve "
- "PCI resources\n");
+ dev_err(&pdev->dev, "failed to reserve resources\n");
return retval;
}
#if defined(__alpha__)
if (device_id == PCI_DEVICE_ID_CYCLOM_Y_Lo) { /* below 1M? */
- printk("Cyclom-Y/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n",
- cyy_rev_id, cy_pci_irq);
- printk("Cyclom-Y/PCI:found winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2,
- (ulong)cy_pci_phys0);
- printk("Cyclom-Y/PCI not supported for low "
- "addresses in Alpha systems.\n");
+ dev_err(&pdev->dev, "Cyclom-Y/PCI not supported for "
+ "low addresses on Alpha systems.\n");
return -EIO;
}
#endif
cy_pci_addr0 = pci_iomap(pdev, 0, CyPCI_Yctl);
cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Ywin);

-#ifdef CY_PCI_DEBUG
- printk("Cyclom-Y/PCI: relocate winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (u_long)cy_pci_addr2, (u_long)cy_pci_addr0);
-#endif
+ dev_dbg(&pdev->dev, "Cyclom-Y/PCI: relocate winaddr=0x%p "
+ "ctladdr=0x%p\n", cy_pci_addr2, cy_pci_addr0);
+
cy_pci_nchan = (unsigned short)(CyPORTS_PER_CHIP *
cyy_init_card(cy_pci_addr2, 1));
if (cy_pci_nchan == 0) {
- printk("Cyclom-Y PCI host card with ");
- printk("no Serial-Modules at 0x%lx.\n",
- (ulong) cy_pci_phys2);
+ dev_err(&pdev->dev, "Cyclom-Y PCI host card with no "
+ "Serial-Modules\n");
return -EIO;
}
if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but no channels are available.\n");
- printk("Change NR_PORTS in cyclades.c and "
- "recompile kernel.\n");
+ dev_err(&pdev->dev, "Cyclom-Y/PCI found, but no "
+ "channels are available. Change NR_PORTS in "
+ "cyclades.c and recompile kernel.\n");
return -EIO;
}
/* fill the next cy_card structure available */
@@ -5041,11 +5001,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but no more cards can be used.\n");
- printk("Change NR_CARDS in cyclades.c and "
- "recompile kernel.\n");
+ dev_err(&pdev->dev, "Cyclom-Y/PCI found, but no more "
+ "cards can be used. Change NR_CARDS in "
+ "cyclades.c and recompile kernel.\n");
return -EIO;
}

@@ -5053,10 +5011,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
retval = request_irq(cy_pci_irq, cyy_interrupt,
IRQF_SHARED, "Cyclom-Y", &cy_card[j]);
if (retval) {
- printk("Cyclom-Y/PCI found at 0x%lx ",
- (ulong) cy_pci_phys2);
- printk("but could not allocate IRQ%d.\n",
- cy_pci_irq);
+ dev_err(&pdev->dev, "could not allocate IRQ\n");
return retval;
}

@@ -5096,37 +5051,22 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
break;
}

- /* print message */
- printk("Cyclom-Y/PCI #%d: 0x%lx-0x%lx, IRQ%d, ",
- j + 1, (ulong)cy_pci_phys2,
- (ulong) (cy_pci_phys2 + CyPCI_Ywin - 1), cy_pci_irq);
- printk("%d channels starting from port %d.\n",
- cy_pci_nchan, cy_next_channel);
+ dev_info(&pdev->dev, "Cyclom-Y/PCI #%d found: %d channels "
+ "starting from port %d.\n", j + 1, cy_pci_nchan,
+ cy_next_channel);
+
for (j = cy_next_channel;
j < cy_next_channel + cy_pci_nchan; j++)
tty_register_device(cy_serial_driver, j, &pdev->dev);

cy_next_channel += cy_pci_nchan;
} else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Lo) {
- /* print message */
- printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n", cyy_rev_id, cy_pci_irq);
- printk("Cyclades-Z/PCI: found winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (ulong)cy_pci_phys2, (ulong)cy_pci_phys0);
- printk("Cyclades-Z/PCI not supported for low "
- "addresses\n");
+ dev_err(&pdev->dev, "Cyclades-Z/PCI not supported for "
+ "low addresses\n");
return -EIO;
} else if (device_id == PCI_DEVICE_ID_CYCLOM_Z_Hi) {
-#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI (bus=0x0%x, pci_id=0x%x, ",
- pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n", cyy_rev_id, cy_pci_irq);
- printk("Cyclades-Z/PCI: found winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (ulong) cy_pci_phys2, (ulong) cy_pci_phys0);
-#endif
+ dev_dbg(&pdev->dev, "Cyclades-Z/PCI found\n");
+
cy_pci_addr0 = pci_iomap(pdev, 0, CyPCI_Zctl);

/* Disable interrupts on the PLX before resetting it */
@@ -5145,7 +5085,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
cy_pci_addr0)->mail_box_0);

if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
- printk(" Warning: PCI I/O bit incorrectly "
+ dev_warn(&pdev->dev, "PCI I/O bit incorrectly "
"set. Ignoring it...\n");
pdev->resource[2].flags &= ~IORESOURCE_IO;
}
@@ -5155,8 +5095,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
with other drivers accessing it. */
retval = pci_request_regions(pdev, "Cyclades-Z");
if (retval) {
- printk(KERN_ERR "cyclades: failed to reserve "
- "PCI resources\n");
+ dev_err(&pdev->dev, "failed to reserve resources\n");
return retval;
}

@@ -5168,28 +5107,24 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
cy_pci_addr2 = pci_iomap(pdev, 2, CyPCI_Zwin);
}

+ dev_dbg(&pdev->dev, "Cyclades-Z/PCI: relocate winaddr=0x%p "
+ "ctladdr=0x%p\n", cy_pci_addr2, cy_pci_addr0);
#ifdef CY_PCI_DEBUG
- printk("Cyclades-Z/PCI: relocate winaddr=0x%lx "
- "ctladdr=0x%lx\n",
- (ulong) cy_pci_addr2, (ulong) cy_pci_addr0);
if (mailbox == ZO_V1) {
cy_writel(&((struct RUNTIME_9060 *)
(cy_pci_addr0))->loc_addr_base,
WIN_CREG);
- printk("Cyclades-8Zo/PCI: FPGA id %lx, ver "
- "%lx\n", (ulong) (0xff &
- readl(&((struct CUSTOM_REG *)
- (cy_pci_addr2))->fpga_id)),
- (ulong)(0xff &
+ dev_info(&pdev->dev, "Cyclades-8Zo/PCI: FPGA id %lx, "
+ "ver %lx\n", (ulong)(0xff &
readl(&((struct CUSTOM_REG *)
- (cy_pci_addr2))->
- fpga_version)));
+ cy_pci_addr2)->fpga_id)),
+ (ulong)(0xff & readl(&((struct CUSTOM_REG *)
+ cy_pci_addr2)->fpga_version)));
cy_writel(&((struct RUNTIME_9060 *)
- (cy_pci_addr0))->loc_addr_base,
- WIN_RAM);
+ cy_pci_addr0)->loc_addr_base, WIN_RAM);
} else {
- printk("Cyclades-Z/PCI: New Cyclades-Z board. "
- "FPGA not loaded\n");
+ dev_info(&pdev->dev, "Cyclades-Z/PCI: New Cyclades-Z "
+ "board. FPGA not loaded\n");
}
#endif
/* The following clears the firmware id word. This
@@ -5205,10 +5140,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
cy_pci_nchan = 8;

if ((cy_next_channel + cy_pci_nchan) > NR_PORTS) {
- printk("Cyclades-8Zo/PCI found at 0x%lx but"
- "no channels are available.\nChange "
- "NR_PORTS in cyclades.c and recompile "
- "kernel.\n", (ulong)cy_pci_phys2);
+ dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
+ "channels are available. Change NR_PORTS in "
+ "cyclades.c and recompile kernel.\n");
return -EIO;
}

@@ -5218,10 +5152,9 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
break;
}
if (j == NR_CARDS) { /* no more cy_cards available */
- printk("Cyclades-8Zo/PCI found at 0x%lx but"
- "no more cards can be used.\nChange "
- "NR_CARDS in cyclades.c and recompile "
- "kernel.\n", (ulong)cy_pci_phys2);
+ dev_err(&pdev->dev, "Cyclades-8Zo/PCI found, but no "
+ "more cards can be used. Change NR_CARDS in "
+ "cyclades.c and recompile kernel.\n");
return -EIO;
}
#ifdef CONFIG_CYZ_INTR
@@ -5231,10 +5164,7 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
IRQF_SHARED, "Cyclades-Z",
&cy_card[j]);
if (retval) {
- printk("Cyclom-8Zo/PCI found at 0x%lx "
- "but could not allocate "
- "IRQ%d.\n", (ulong)cy_pci_phys2,
- cy_pci_irq);
+ dev_err(&pdev->dev, "could not allocate IRQ\n");
return retval;
}
}
@@ -5250,22 +5180,10 @@ static int __devinit cy_pci_probe(struct pci_dev *pdev,
cy_init_card(&cy_card[j], j);
pci_set_drvdata(pdev, &cy_card[j]);

- /* print message */
-#ifdef CONFIG_CYZ_INTR
- /* don't report IRQ if board is no IRQ */
- if ((cy_pci_irq != 0) && (cy_pci_irq != 255))
- printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, "
- "IRQ%d, ", j + 1, (ulong)cy_pci_phys2,
- (ulong) (cy_pci_phys2 + CyPCI_Zwin - 1),
- cy_pci_irq);
- else
-#endif /* CONFIG_CYZ_INTR */
- printk("Cyclades-8Zo/PCI #%d: 0x%lx-0x%lx, ",
- j + 1, (ulong)cy_pci_phys2,
- (ulong)(cy_pci_phys2 + CyPCI_Zwin - 1));
+ dev_info(&pdev->dev, "Cyclades-8Zo/PCI #%d found: %d channels "
+ "starting from port %d.\n", j + 1, cy_pci_nchan,
+ cy_next_channel);

- printk("%d channels starting from port %d.\n",
- cy_pci_nchan, cy_next_channel);
for (j = cy_next_channel;
j < cy_next_channel + cy_pci_nchan; j++)
tty_register_device(cy_serial_driver, j, &pdev->dev);
@@ -5320,16 +5238,6 @@ static struct pci_driver cy_pci_driver = {
};
#endif

-/*
- * This routine prints out the appropriate serial driver version number
- * and identifies which options were configured into this driver.
- */
-static inline void show_version(void)
-{
- printk("Cyclades driver " CY_VERSION "\n");
- printk(" built %s %s\n", __DATE__, __TIME__);
-} /* show_version */
-
static int
cyclades_get_proc_info(char *buf, char **start, off_t offset, int length,
int *eof, void *data)
@@ -5436,7 +5344,9 @@ static int __init cy_init(void)
cy_serial_driver = alloc_tty_driver(NR_PORTS);
if (!cy_serial_driver)
goto err;
- show_version();
+
+ printk(KERN_INFO "Cyclades driver " CY_VERSION " (built %s %s)\n",
+ __DATE__, __TIME__);

/* Initialize the tty_driver structure */

@@ -5505,8 +5415,8 @@ static void __exit cy_cleanup_module(void)
#endif /* CONFIG_CYZ_INTR */

if ((e1 = tty_unregister_driver(cy_serial_driver)))
- printk("cyc: failed to unregister Cyclades serial driver(%d)\n",
- e1);
+ printk(KERN_ERR "failed to unregister Cyclades serial "
+ "driver(%d)\n", e1);

put_tty_driver(cy_serial_driver);

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/