Re: 2.6.21 broke arm scsi on qemu -M volatilepb

From: Randy Dunlap
Date: Fri May 11 2007 - 00:17:41 EST


[adding linux-scsi]

On Thu, 10 May 2007 23:59:10 -0400 Rob Landley wrote:

> Booting a 2.6.20 kernel under qemu works fine and gets me to a shell prompt,
> but booting a 2.6.21.1 kernel cycles endlessly on scsi, going:
>
> Loading iSCSI transport class v2.0-724.
> PCI: enabling device 0000:00:0c.0 (0140 -> 0143)
> sym0: <895a> rev 0x0 at pci 0000:00:0c.0 irq 0
> sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
> sym0: SCSI BUS has been reset.
> scsi0 : sym-2.2.3
> scsi 0:0:0:0: ABORT operation started.
> scsi 0:0:0:0: ABORT operation timed-out.
> scsi 0:0:0:0: DEVICE RESET operation started.
> scsi 0:0:0:0: DEVICE RESET operation timed-out.
> scsi 0:0:0:0: BUS RESET operation started.
> scsi 0:0:0:0: BUS RESET operation timed-out.
> scsi 0:0:0:0: HOST RESET operation started.
> sym0: SCSI BUS has been reset.
> ...
> And so on.
>
> If you're interested in reproducing this, download the most recent
> http://landley.net/hg/firmware snapshot (links up top), run "./build.sh
> armv4l", and when that's done "cd build" and "./run-armv4l.sh".
>
> Is this a known issue? A quick google for "arm scsi 2.6.21" didn't turn up
> anything relevant...
>
> Rob


---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/