[git patches] net driver updates
From: Jeff Garzik
Date: Fri May 11 2007 - 17:59:36 EST
I went ahead and merged the drivers/atm Kconfig updates.
And this brings much-needed libertas updates.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git upstream-linus
to receive the following updates:
drivers/atm/Kconfig | 32 +-
drivers/net/Kconfig | 16 +-
drivers/net/mlx4/eq.c | 2 +-
drivers/net/netxen/netxen_nic_main.c | 2 +-
drivers/net/pcmcia/Kconfig | 23 +-
drivers/net/phy/Kconfig | 22 +-
drivers/net/phy/davicom.c | 34 +-
drivers/net/s2io.c | 368 +++++++-
drivers/net/s2io.h | 32 +
drivers/net/skge.c | 9 +
drivers/net/sky2.c | 53 +-
drivers/net/spider_net.c | 8 +-
drivers/net/wan/Kconfig | 34 +-
drivers/net/wireless/libertas/Makefile | 9 -
drivers/net/wireless/libertas/README | 516 -----------
drivers/net/wireless/libertas/assoc.c | 41 +-
drivers/net/wireless/libertas/cmd.c | 23 +-
drivers/net/wireless/libertas/cmdresp.c | 4 +-
drivers/net/wireless/libertas/debugfs.c | 31 +-
drivers/net/wireless/libertas/defs.h | 52 +-
drivers/net/wireless/libertas/dev.h | 14 +-
drivers/net/wireless/libertas/fw.c | 9 +-
drivers/net/wireless/libertas/if_usb.c | 5 +-
drivers/net/wireless/libertas/if_usb.h | 2 -
drivers/net/wireless/libertas/ioctl.c | 1529 +------------------------------
drivers/net/wireless/libertas/join.c | 194 +----
drivers/net/wireless/libertas/join.h | 7 -
drivers/net/wireless/libertas/main.c | 7 +
drivers/net/wireless/libertas/rx.c | 4 +-
drivers/net/wireless/libertas/scan.c | 203 ++---
drivers/net/wireless/libertas/scan.h | 22 +-
drivers/net/wireless/libertas/tx.c | 2 +-
drivers/net/wireless/libertas/version.h | 7 -
drivers/net/wireless/libertas/wext.c | 448 +--------
drivers/net/wireless/libertas/wext.h | 85 --
35 files changed, 750 insertions(+), 3099 deletions(-)
Andrew Morton (2):
netxen_nic_main don't use deprecated irq flags
mlx4: don't use deprecated IRQ flags
Dan Williams (19):
libertas: remove WPA_SUPPLICANT structure
libertas: use <net/ieee80211.h> for MAX_WPA_IE_LEN
libertas: fix size of SSID comparison in stop_adhoc check
libertas: remove 8021xauthalgs private ioctl
libertas: remove setauthalg private ioctl
libertas: remove incorrect vi modelines
libertas: remove custom encryption mode stuff
libertas: remove setwpaie private ioctl
libertas: remove WLAN_802_11_AUTHENTICATION_MODE
libertas: remove WLAN_802_11_WEP_STATUS enum
libertas: remove WLAN_802_11_NETWORK_INFRASTRUCTURE enum
libertas: Get rid of version.h
libertas: Purge non-mesh ioctls
libertas: remove SUPPORT_BOOT_COMMAND
libertas: Clean up debug defines
libertas: make debugfs.c sparse-clean
libertas: fix missing unlock in TX error path
libertas: sparse fixes
libertas: 64-bit cleanups
Ishizaki Kou (1):
spidernet: remove unnecessary accesses to phy
Jan Engelhardt (5):
Use menuconfig objects: PHY
Use menuconfig objects: netdev
Use menuconfig objects II - netdev/atm
Use menuconfig objects II - netdev/pcmcia
Use menuconfig objects II - netdev/wan
Kim Phillips (1):
Add support for the Davicom DM9161A PHY
Sreenivasa Honnur (3):
S2IO: getringparam ethtool option
S2IO: statistics for memory allocation failuers
S2IO: Statistics for link up/down and memory allocated/freed
Stephen Hemminger (4):
sky2: fix oops on shutdown
skge: crash on shutdown/suspend
sky2: 88e8071 support not ready
sky2: only disable 88e8056 on some boards
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 3368745..f5a47a4 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -2,19 +2,22 @@
# ATM device configuration
#
-menu "ATM drivers"
+menuconfig ATM_DRIVERS
+ bool "ATM drivers"
depends on NETDEVICES && ATM
+ default y
+
+if ATM_DRIVERS
config ATM_DUMMY
tristate "Dummy ATM driver"
- depends on ATM
help
Dummy ATM driver. Useful for proxy signalling, testing,
and development. If unsure, say N.
config ATM_TCP
tristate "ATM over TCP"
- depends on INET && ATM
+ depends on INET
help
ATM over TCP driver. Useful mainly for development and for
experiments. If unsure, say N.
@@ -30,7 +33,7 @@ config ATM_LANAI
config ATM_ENI
tristate "Efficient Networks ENI155P"
- depends on PCI && ATM
+ depends on PCI
---help---
Driver for the Efficient Networks ENI155p series and SMC ATM
Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
@@ -139,7 +142,7 @@ config ATM_ENI_BURST_RX_2W
config ATM_FIRESTREAM
tristate "Fujitsu FireStream (FS50/FS155) "
- depends on PCI && ATM
+ depends on PCI
help
Driver for the Fujitsu FireStream 155 (MB86697) and
FireStream 50 (MB86695) ATM PCI chips.
@@ -149,7 +152,7 @@ config ATM_FIRESTREAM
config ATM_ZATM
tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI && ATM
+ depends on PCI
help
Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
adapters.
@@ -169,7 +172,7 @@ config ATM_ZATM_DEBUG
config ATM_NICSTAR
tristate "IDT 77201 (NICStAR) (ForeRunnerLE)"
- depends on PCI && ATM && !64BIT
+ depends on PCI && !64BIT
help
The NICStAR chipset family is used in a large number of ATM NICs for
25 and for 155 Mbps, including IDT cards and the Fore ForeRunnerLE
@@ -202,7 +205,7 @@ config ATM_NICSTAR_USE_IDT77105
config ATM_IDT77252
tristate "IDT 77252 (NICStAR II)"
- depends on PCI && ATM
+ depends on PCI
help
Driver for the IDT 77252 ATM PCI chips.
@@ -237,7 +240,7 @@ config ATM_IDT77252_USE_SUNI
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI && ATM
+ depends on PCI
select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
@@ -262,7 +265,7 @@ config ATM_AMBASSADOR_DEBUG
config ATM_HORIZON
tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)"
- depends on PCI && ATM
+ depends on PCI
help
This is a driver for the Horizon chipset ATM adapter cards once
produced by Madge Networks Ltd. Say Y (or M to compile as a module
@@ -286,7 +289,7 @@ config ATM_HORIZON_DEBUG
config ATM_IA
tristate "Interphase ATM PCI x575/x525/x531"
- depends on PCI && ATM && !64BIT
+ depends on PCI && !64BIT
---help---
This is a driver for the Interphase (i)ChipSAR adapter cards
which include a variety of variants in term of the size of the
@@ -319,7 +322,7 @@ config ATM_IA_DEBUG
config ATM_FORE200E_MAYBE
tristate "FORE Systems 200E-series"
- depends on (PCI || SBUS) && ATM
+ depends on PCI || SBUS
---help---
This is a driver for the FORE Systems 200E-series ATM adapter
cards. It simultaneously supports PCA-200E and SBA-200E models
@@ -436,7 +439,7 @@ config ATM_FORE200E
config ATM_HE
tristate "ForeRunner HE Series"
- depends on PCI && ATM
+ depends on PCI
help
This is a driver for the Marconi ForeRunner HE-series ATM adapter
cards. It simultaneously supports the 155 and 622 versions.
@@ -448,5 +451,4 @@ config ATM_HE_USE_SUNI
Support for the S/UNI-Ultra and S/UNI-622 found in the ForeRunner
HE cards. This driver provides carrier detection some statistics.
-endmenu
-
+endif # ATM
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa489b1..8a7f9e9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1898,8 +1898,12 @@ endmenu
# Gigabit Ethernet
#
-menu "Ethernet (1000 Mbit)"
+menuconfig NETDEV_1000
+ bool "Ethernet (1000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_1000
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2326,14 +2330,18 @@ config ATL1
To compile this driver as a module, choose M here. The module
will be called atl1.
-endmenu
+endif # NETDEV_1000
#
# 10 Gigabit Ethernet
#
-menu "Ethernet (10000 Mbit)"
+menuconfig NETDEV_10000
+ bool "Ethernet (10000 Mbit)"
depends on !UML
+ default y
+
+if NETDEV_10000
config CHELSIO_T1
tristate "Chelsio 10Gb Ethernet support"
@@ -2507,7 +2515,7 @@ config MLX4_DEBUG
debug_level module parameter (which can also be set after
the driver is loaded through sysfs).
-endmenu
+endif # NETDEV_10000
source "drivers/net/tokenring/Kconfig"
diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c
index acf1c80..af016d0 100644
--- a/drivers/net/mlx4/eq.c
+++ b/drivers/net/mlx4/eq.c
@@ -623,7 +623,7 @@ int __devinit mlx4_init_eq_table(struct mlx4_dev *dev)
priv->eq_table.eq[MLX4_EQ_CATAS].have_irq = 1;
} else {
err = request_irq(dev->pdev->irq, mlx4_interrupt,
- SA_SHIRQ, DRV_NAME, dev);
+ IRQF_SHARED, DRV_NAME, dev);
if (err)
goto err_out_async;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 4e32bb6..2c5c6d2 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -735,7 +735,7 @@ static int netxen_nic_open(struct net_device *netdev)
}
adapter->irq = adapter->ahw.pdev->irq;
err = request_irq(adapter->ahw.pdev->irq, netxen_intr,
- SA_SHIRQ | SA_SAMPLE_RANDOM, netdev->name,
+ IRQF_SHARED|IRQF_SAMPLE_RANDOM, netdev->name,
adapter);
if (err) {
printk(KERN_ERR "request_irq failed with: %d\n", err);
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 74f8620..5d658bc 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -2,11 +2,9 @@
# PCMCIA Network device configuration
#
-menu "PCMCIA network device support"
- depends on NETDEVICES && PCMCIA!=n
-
-config NET_PCMCIA
+menuconfig NET_PCMCIA
bool "PCMCIA network device support"
+ depends on PCMCIA
---help---
Say Y if you would like to include support for any PCMCIA or CardBus
network adapters, then say Y to the driver for your particular card
@@ -21,9 +19,10 @@ config NET_PCMCIA
If unsure, say N.
+if NET_PCMCIA
+
config PCMCIA_3C589
tristate "3Com 3c589 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
(PC-card) Ethernet card to your computer.
@@ -33,7 +32,6 @@ config PCMCIA_3C589
config PCMCIA_3C574
tristate "3Com 3c574 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
(PC-card) Fast Ethernet card to your computer.
@@ -43,7 +41,6 @@ config PCMCIA_3C574
config PCMCIA_FMVJ18X
tristate "Fujitsu FMV-J18x PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
help
Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
@@ -54,7 +51,6 @@ config PCMCIA_FMVJ18X
config PCMCIA_PCNET
tristate "NE2000 compatible PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
help
Say Y here if you intend to attach an NE2000 compatible PCMCIA
@@ -65,7 +61,6 @@ config PCMCIA_PCNET
config PCMCIA_NMCLAN
tristate "New Media PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a New Media Ethernet or LiveWire
PCMCIA (PC-card) Ethernet card to your computer.
@@ -75,7 +70,6 @@ config PCMCIA_NMCLAN
config PCMCIA_SMC91C92
tristate "SMC 91Cxx PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
select CRC32
select MII
help
@@ -87,7 +81,6 @@ config PCMCIA_SMC91C92
config PCMCIA_XIRC2PS
tristate "Xircom 16-bit PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
help
Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
Ethernet or Fast Ethernet card to your computer.
@@ -97,7 +90,6 @@ config PCMCIA_XIRC2PS
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
- depends on NET_PCMCIA && PCMCIA
---help---
Say Y here if you intend to attach an Asix AX88190-based PCMCIA
(PC-card) Fast Ethernet card to your computer. These cards are
@@ -109,7 +101,7 @@ config PCMCIA_AXNET
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
- depends on NET_PCMCIA && ARCNET_COM20020 && PCMCIA
+ depends on ARCNET_COM20020
help
Say Y here if you intend to attach this type of ARCnet PCMCIA card
to your computer.
@@ -119,7 +111,7 @@ config ARCNET_COM20020_CS
config PCMCIA_IBMTR
tristate "IBM PCMCIA tokenring adapter support"
- depends on NET_PCMCIA && IBMTR!=y && TR && PCMCIA && !64BIT
+ depends on IBMTR!=y && TR && !64BIT
help
Say Y here if you intend to attach this type of Token Ring PCMCIA
card to your computer. You then also need to say Y to "Token Ring
@@ -128,5 +120,4 @@ config PCMCIA_IBMTR
To compile this driver as a module, choose M here: the module will be
called ibmtr_cs.
-endmenu
-
+endif # NET_PCMCIA
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index c0d3101..09b6f25 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -2,70 +2,61 @@
# PHY Layer Configuration
#
-menu "PHY device support"
- depends on !S390
-
-config PHYLIB
+menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
+ depends on !S390
depends on NET_ETHERNET && (BROKEN || !S390)
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
managing PHY devices.
+if PHYLIB
+
comment "MII PHY device drivers"
- depends on PHYLIB
config MARVELL_PHY
tristate "Drivers for Marvell PHYs"
- depends on PHYLIB
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
tristate "Drivers for Davicom PHYs"
- depends on PHYLIB
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
tristate "Drivers for Quality Semiconductor PHYs"
- depends on PHYLIB
---help---
Currently supports the qs6612
config LXT_PHY
tristate "Drivers for the Intel LXT PHYs"
- depends on PHYLIB
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
tristate "Drivers for the Cicada PHYs"
- depends on PHYLIB
---help---
Currently supports the cis8204
+
config VITESSE_PHY
tristate "Drivers for the Vitesse PHYs"
- depends on PHYLIB
---help---
Currently supports the vsc8244
config SMSC_PHY
tristate "Drivers for SMSC PHYs"
- depends on PHYLIB
---help---
Currently supports the LAN83C185 PHY
config BROADCOM_PHY
tristate "Drivers for Broadcom PHYs"
- depends on PHYLIB
---help---
Currently supports the BCM5411, BCM5421 and BCM5461 PHYs.
config FIXED_PHY
tristate "Drivers for PHY emulation on fixed speed/link"
- depends on PHYLIB
---help---
Adds the driver to PHY layer to cover the boards that do not have any PHY bound,
but with the ability to manipulate the speed/link in software. The relevant MII
@@ -80,5 +71,4 @@ config FIXED_MII_100_FDX
bool "Emulation for 100M Fdx fixed PHY behavior"
depends on FIXED_PHY
-endmenu
-
+endif # PHYLIB
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 519baa3..7ed632d 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -139,7 +139,7 @@ static int dm9161_ack_interrupt(struct phy_device *phydev)
return (err < 0) ? err : 0;
}
-static struct phy_driver dm9161_driver = {
+static struct phy_driver dm9161e_driver = {
.phy_id = 0x0181b880,
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
@@ -147,7 +147,18 @@ static struct phy_driver dm9161_driver = {
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.read_status = genphy_read_status,
- .driver = { .owner = THIS_MODULE,},
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver dm9161a_driver = {
+ .phy_id = 0x0181b8a0,
+ .name = "Davicom DM9161A",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config_init = dm9161_config_init,
+ .config_aneg = dm9161_config_aneg,
+ .read_status = genphy_read_status,
+ .driver = { .owner = THIS_MODULE,},
};
static struct phy_driver dm9131_driver = {
@@ -160,31 +171,38 @@ static struct phy_driver dm9131_driver = {
.read_status = genphy_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
- .driver = { .owner = THIS_MODULE,},
+ .driver = { .owner = THIS_MODULE,},
};
static int __init davicom_init(void)
{
int ret;
- ret = phy_driver_register(&dm9161_driver);
+ ret = phy_driver_register(&dm9161e_driver);
if (ret)
goto err1;
- ret = phy_driver_register(&dm9131_driver);
+ ret = phy_driver_register(&dm9161a_driver);
if (ret)
goto err2;
+
+ ret = phy_driver_register(&dm9131_driver);
+ if (ret)
+ goto err3;
return 0;
- err2:
- phy_driver_unregister(&dm9161_driver);
+ err3:
+ phy_driver_unregister(&dm9161a_driver);
+ err2:
+ phy_driver_unregister(&dm9161e_driver);
err1:
return ret;
}
static void __exit davicom_exit(void)
{
- phy_driver_unregister(&dm9161_driver);
+ phy_driver_unregister(&dm9161e_driver);
+ phy_driver_unregister(&dm9161a_driver);
phy_driver_unregister(&dm9131_driver);
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 290e1c1..e3e6d41 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -84,7 +84,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.22.1"
+#define DRV_VERSION "2.0.23.1"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -281,6 +281,28 @@ static char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
("lro_out_of_sequence_pkts"),
("lro_flush_due_to_max_pkts"),
("lro_avg_aggr_pkts"),
+ ("mem_alloc_fail_cnt"),
+ ("watchdog_timer_cnt"),
+ ("mem_allocated"),
+ ("mem_freed"),
+ ("link_up_cnt"),
+ ("link_down_cnt"),
+ ("link_up_time"),
+ ("link_down_time"),
+ ("tx_tcode_buf_abort_cnt"),
+ ("tx_tcode_desc_abort_cnt"),
+ ("tx_tcode_parity_err_cnt"),
+ ("tx_tcode_link_loss_cnt"),
+ ("tx_tcode_list_proc_err_cnt"),
+ ("rx_tcode_parity_err_cnt"),
+ ("rx_tcode_abort_cnt"),
+ ("rx_tcode_parity_abort_cnt"),
+ ("rx_tcode_rda_fail_cnt"),
+ ("rx_tcode_unkn_prot_cnt"),
+ ("rx_tcode_fcs_err_cnt"),
+ ("rx_tcode_buf_size_err_cnt"),
+ ("rx_tcode_rxd_corrupt_cnt"),
+ ("rx_tcode_unkn_err_cnt")
};
#define S2IO_XENA_STAT_LEN sizeof(ethtool_xena_stats_keys)/ ETH_GSTRING_LEN
@@ -490,6 +512,7 @@ static int init_shared_mem(struct s2io_nic *nic)
struct mac_info *mac_control;
struct config_param *config;
+ unsigned long long mem_allocated = 0;
mac_control = &nic->mac_control;
config = &nic->config;
@@ -519,6 +542,7 @@ static int init_shared_mem(struct s2io_nic *nic)
"Malloc failed for list_info\n");
return -ENOMEM;
}
+ mem_allocated += list_holder_size;
memset(mac_control->fifos[i].list_info, 0, list_holder_size);
}
for (i = 0; i < config->tx_fifo_num; i++) {
@@ -565,6 +589,7 @@ static int init_shared_mem(struct s2io_nic *nic)
DBG_PRINT(INFO_DBG, "failed for TxDL\n");
return -ENOMEM;
}
+ mem_allocated += PAGE_SIZE;
}
while (k < lst_per_page) {
int l = (j * lst_per_page) + k;
@@ -582,6 +607,7 @@ static int init_shared_mem(struct s2io_nic *nic)
nic->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
if (!nic->ufo_in_band_v)
return -ENOMEM;
+ mem_allocated += (size * sizeof(u64));
/* Allocation and initialization of RXDs in Rings */
size = 0;
@@ -639,6 +665,7 @@ static int init_shared_mem(struct s2io_nic *nic)
rx_blocks->block_virt_addr = tmp_v_addr;
return -ENOMEM;
}
+ mem_allocated += size;
memset(tmp_v_addr, 0, size);
rx_blocks->block_virt_addr = tmp_v_addr;
rx_blocks->block_dma_addr = tmp_p_addr;
@@ -647,6 +674,8 @@ static int init_shared_mem(struct s2io_nic *nic)
GFP_KERNEL);
if (!rx_blocks->rxds)
return -ENOMEM;
+ mem_allocated +=
+ (sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
for (l=0; l<rxd_count[nic->rxd_mode];l++) {
rx_blocks->rxds[l].virt_addr =
rx_blocks->block_virt_addr +
@@ -689,6 +718,7 @@ static int init_shared_mem(struct s2io_nic *nic)
GFP_KERNEL);
if (!mac_control->rings[i].ba)
return -ENOMEM;
+ mem_allocated +=(sizeof(struct buffAdd *) * blk_cnt);
for (j = 0; j < blk_cnt; j++) {
int k = 0;
mac_control->rings[i].ba[j] =
@@ -697,6 +727,8 @@ static int init_shared_mem(struct s2io_nic *nic)
GFP_KERNEL);
if (!mac_control->rings[i].ba[j])
return -ENOMEM;
+ mem_allocated += (sizeof(struct buffAdd) * \
+ (rxd_count[nic->rxd_mode] + 1));
while (k != rxd_count[nic->rxd_mode]) {
ba = &mac_control->rings[i].ba[j][k];
@@ -704,6 +736,8 @@ static int init_shared_mem(struct s2io_nic *nic)
(BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_0_org)
return -ENOMEM;
+ mem_allocated +=
+ (BUF0_LEN + ALIGN_SIZE);
tmp = (unsigned long)ba->ba_0_org;
tmp += ALIGN_SIZE;
tmp &= ~((unsigned long) ALIGN_SIZE);
@@ -713,6 +747,8 @@ static int init_shared_mem(struct s2io_nic *nic)
(BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
if (!ba->ba_1_org)
return -ENOMEM;
+ mem_allocated
+ += (BUF1_LEN + ALIGN_SIZE);
tmp = (unsigned long) ba->ba_1_org;
tmp += ALIGN_SIZE;
tmp &= ~((unsigned long) ALIGN_SIZE);
@@ -736,6 +772,7 @@ static int init_shared_mem(struct s2io_nic *nic)
*/
return -ENOMEM;
}
+ mem_allocated += size;
mac_control->stats_mem_sz = size;
tmp_v_addr = mac_control->stats_mem;
@@ -743,7 +780,7 @@ static int init_shared_mem(struct s2io_nic *nic)
memset(tmp_v_addr, 0, size);
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long) tmp_p_addr);
-
+ mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
return SUCCESS;
}
@@ -757,12 +794,14 @@ static int init_shared_mem(struct s2io_nic *nic)
static void free_shared_mem(struct s2io_nic *nic)
{
int i, j, blk_cnt, size;
+ u32 ufo_size = 0;
void *tmp_v_addr;
dma_addr_t tmp_p_addr;
struct mac_info *mac_control;
struct config_param *config;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
+ int page_num = 0;
if (!nic)
return;
@@ -774,8 +813,9 @@ static void free_shared_mem(struct s2io_nic *nic)
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
- int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
- lst_per_page);
+ ufo_size += config->tx_cfg[i].fifo_len;
+ page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
+ lst_per_page);
for (j = 0; j < page_num; j++) {
int mem_blks = (j * lst_per_page);
if (!mac_control->fifos[i].list_info)
@@ -790,6 +830,8 @@ static void free_shared_mem(struct s2io_nic *nic)
mac_control->fifos[i].
list_info[mem_blks].
list_phy_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += PAGE_SIZE;
}
/* If we got a zero DMA address during allocation,
* free the page now
@@ -803,8 +845,12 @@ static void free_shared_mem(struct s2io_nic *nic)
dev->name);
DBG_PRINT(INIT_DBG, "Virtual address %p\n",
mac_control->zerodma_virt_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += PAGE_SIZE;
}
kfree(mac_control->fifos[i].list_info);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ (nic->config.tx_cfg[i].fifo_len *sizeof(struct list_info_hold));
}
size = SIZE_OF_BLOCK;
@@ -819,7 +865,10 @@ static void free_shared_mem(struct s2io_nic *nic)
break;
pci_free_consistent(nic->pdev, size,
tmp_v_addr, tmp_p_addr);
+ nic->mac_control.stats_info->sw_stat.mem_freed += size;
kfree(mac_control->rings[i].rx_blocks[j].rxds);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ ( sizeof(struct rxd_info)* rxd_count[nic->rxd_mode]);
}
}
@@ -836,12 +885,20 @@ static void free_shared_mem(struct s2io_nic *nic)
struct buffAdd *ba =
&mac_control->rings[i].ba[j][k];
kfree(ba->ba_0_org);
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += (BUF0_LEN + ALIGN_SIZE);
kfree(ba->ba_1_org);
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += (BUF1_LEN + ALIGN_SIZE);
k++;
}
kfree(mac_control->rings[i].ba[j]);
+ nic->mac_control.stats_info->sw_stat.mem_freed += (sizeof(struct buffAdd) *
+ (rxd_count[nic->rxd_mode] + 1));
}
kfree(mac_control->rings[i].ba);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ (sizeof(struct buffAdd *) * blk_cnt);
}
}
@@ -850,9 +907,14 @@ static void free_shared_mem(struct s2io_nic *nic)
mac_control->stats_mem_sz,
mac_control->stats_mem,
mac_control->stats_mem_phy);
+ nic->mac_control.stats_info->sw_stat.mem_freed +=
+ mac_control->stats_mem_sz;
}
- if (nic->ufo_in_band_v)
+ if (nic->ufo_in_band_v) {
kfree(nic->ufo_in_band_v);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (ufo_size * sizeof(u64));
+ }
}
/**
@@ -2122,10 +2184,12 @@ static void free_tx_buffers(struct s2io_nic *nic)
for (i = 0; i < config->tx_fifo_num; i++) {
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
- txdp = (struct TxD *) mac_control->fifos[i].list_info[j].
- list_virt_addr;
+ txdp = (struct TxD *) \
+ mac_control->fifos[i].list_info[j].list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
if (skb) {
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += skb->truesize;
dev_kfree_skb(skb);
cnt++;
}
@@ -2186,11 +2250,14 @@ static int fill_rxd_3buf(struct s2io_nic *nic, struct RxD_t *rxdp, struct \
/* skb_shinfo(skb)->frag_list will have L4 data payload */
skb_shinfo(skb)->frag_list = dev_alloc_skb(dev->mtu + ALIGN_SIZE);
if (skb_shinfo(skb)->frag_list == NULL) {
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n ", dev->name);
return -ENOMEM ;
}
frag_list = skb_shinfo(skb)->frag_list;
skb->truesize += frag_list->truesize;
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += frag_list->truesize;
frag_list->next = NULL;
tmp = (void *)ALIGN((long)frag_list->data, ALIGN_SIZE + 1);
frag_list->data = tmp;
@@ -2319,8 +2386,12 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
wmb();
first_rxdp->Control_1 |= RXD_OWN_XENA;
}
+ nic->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += skb->truesize;
if (nic->rxd_mode == RXD_MODE_1) {
/* 1 buffer mode - normal operation mode */
memset(rxdp, 0, sizeof(struct RxD1));
@@ -2328,7 +2399,8 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
((struct RxD1*)rxdp)->Buffer0_ptr = pci_map_single
(nic->pdev, skb->data, size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
- rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
+ rxdp->Control_2 =
+ SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
} else if (nic->rxd_mode >= RXD_MODE_3A) {
/*
@@ -2342,7 +2414,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
* payload
*/
- /* save the buffer pointers to avoid frequent dma mapping */
+ /* save buffer pointers to avoid frequent dma mapping */
Buffer0_ptr = ((struct RxD3*)rxdp)->Buffer0_ptr;
Buffer1_ptr = ((struct RxD3*)rxdp)->Buffer1_ptr;
memset(rxdp, 0, sizeof(struct RxD3));
@@ -2364,7 +2436,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
PCI_DMA_FROMDEVICE);
else
pci_dma_sync_single_for_device(nic->pdev,
- (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
+ (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
if (nic->rxd_mode == RXD_MODE_3B) {
@@ -2391,6 +2463,8 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
} else {
/* 3 buffer mode */
if (fill_rxd_3buf(nic, rxdp, skb) == -ENOMEM) {
+ nic->mac_control.stats_info->sw_stat.\
+ mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
if (first_rxdp) {
wmb();
@@ -2491,6 +2565,7 @@ static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
PCI_DMA_FROMDEVICE);
memset(rxdp, 0, sizeof(struct RxD3));
}
+ sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
dev_kfree_skb(skb);
atomic_dec(&sp->rx_bufs_left[ring_no]);
}
@@ -2820,13 +2895,35 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
nic->mac_control.stats_info->sw_stat.
parity_err_cnt++;
}
- if ((err >> 48) == 0xA) {
- DBG_PRINT(TX_DBG, "TxD returned due \
- to loss of link\n");
- }
- else {
- DBG_PRINT(ERR_DBG, "***TxD error %llx\n", err);
- }
+
+ /* update t_code statistics */
+ err >>= 48;
+ switch(err) {
+ case 2:
+ nic->mac_control.stats_info->sw_stat.
+ tx_buf_abort_cnt++;
+ break;
+
+ case 3:
+ nic->mac_control.stats_info->sw_stat.
+ tx_desc_abort_cnt++;
+ break;
+
+ case 7:
+ nic->mac_control.stats_info->sw_stat.
+ tx_parity_err_cnt++;
+ break;
+
+ case 10:
+ nic->mac_control.stats_info->sw_stat.
+ tx_link_loss_cnt++;
+ break;
+
+ case 15:
+ nic->mac_control.stats_info->sw_stat.
+ tx_list_proc_err_cnt++;
+ break;
+ }
}
skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
@@ -2839,6 +2936,7 @@ static void tx_intr_handler(struct fifo_info *fifo_data)
/* Updating the statistics block */
nic->stats.tx_bytes += skb->len;
+ nic->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
dev_kfree_skb_irq(skb);
get_info.offset++;
@@ -3314,7 +3412,9 @@ static void s2io_reset(struct s2io_nic * sp)
u16 subid, pci_cmd;
int i;
u16 val16;
- unsigned long long reset_cnt = 0;
+ unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
+ unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
+
DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
__FUNCTION__, sp->dev->name);
@@ -3380,11 +3480,26 @@ new_way:
/* Reset device statistics maintained by OS */
memset(&sp->stats, 0, sizeof (struct net_device_stats));
- /* save reset count */
+
+ up_cnt = sp->mac_control.stats_info->sw_stat.link_up_cnt;
+ down_cnt = sp->mac_control.stats_info->sw_stat.link_down_cnt;
+ up_time = sp->mac_control.stats_info->sw_stat.link_up_time;
+ down_time = sp->mac_control.stats_info->sw_stat.link_down_time;
reset_cnt = sp->mac_control.stats_info->sw_stat.soft_reset_cnt;
+ mem_alloc_cnt = sp->mac_control.stats_info->sw_stat.mem_allocated;
+ mem_free_cnt = sp->mac_control.stats_info->sw_stat.mem_freed;
+ watchdog_cnt = sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt;
+ /* save link up/down time/cnt, reset/memory/watchdog cnt */
memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
- /* restore reset count */
+ /* restore link up/down time/cnt, reset/memory/watchdog cnt */
+ sp->mac_control.stats_info->sw_stat.link_up_cnt = up_cnt;
+ sp->mac_control.stats_info->sw_stat.link_down_cnt = down_cnt;
+ sp->mac_control.stats_info->sw_stat.link_up_time = up_time;
+ sp->mac_control.stats_info->sw_stat.link_down_time = down_time;
sp->mac_control.stats_info->sw_stat.soft_reset_cnt = reset_cnt;
+ sp->mac_control.stats_info->sw_stat.mem_allocated = mem_alloc_cnt;
+ sp->mac_control.stats_info->sw_stat.mem_freed = mem_free_cnt;
+ sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt = watchdog_cnt;
/* SXE-002: Configure link and activity LED to turn it off */
subid = sp->pdev->subsystem_device;
@@ -3672,19 +3787,29 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
nic->entries = kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct msix_entry),
GFP_KERNEL);
if (nic->entries == NULL) {
- DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
+ __FUNCTION__);
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
return -ENOMEM;
}
- memset(nic->entries, 0, MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ memset(nic->entries, 0,MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
nic->s2io_entries =
kmalloc(MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (nic->s2io_entries == NULL) {
- DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", __FUNCTION__);
+ DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
+ __FUNCTION__);
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
return -ENOMEM;
}
+ nic->mac_control.stats_info->sw_stat.mem_allocated
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
memset(nic->s2io_entries, 0,
MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
@@ -3708,7 +3833,8 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
rx_mat = readq(&bar0->rx_mat);
for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].arg
+ = &nic->mac_control.rings[j];
nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
}
@@ -3717,7 +3843,8 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
tx_mat = readq(&bar0->tx_mat0_n[7]);
for (j=0; j<nic->config.rx_ring_num; j++, msix_indx++) {
tx_mat |= TX_MAT_SET(i, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[msix_indx].arg
+ = &nic->mac_control.rings[j];
nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
}
@@ -3734,7 +3861,11 @@ static int s2io_enable_msi_x(struct s2io_nic *nic)
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
+ nic->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
nic->avail_msix_vectors = 0;
@@ -3802,10 +3933,16 @@ static int s2io_open(struct net_device *dev)
hw_init_failed:
if (sp->intr_type == MSI_X) {
- if (sp->entries)
+ if (sp->entries) {
kfree(sp->entries);
- if (sp->s2io_entries)
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ }
+ if (sp->s2io_entries) {
kfree(sp->s2io_entries);
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ }
}
return err;
}
@@ -3866,6 +4003,13 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
config = &sp->config;
DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
+
+ if (unlikely(skb->len <= 0)) {
+ DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+ dev_kfree_skb_any(skb);
+ return 0;
+}
+
spin_lock_irqsave(&sp->tx_lock, flags);
if (atomic_read(&sp->card_state) == CARD_DOWN) {
DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
@@ -3876,7 +4020,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
}
queue = 0;
-
/* Get Fifo number to Transmit based on vlan priority */
if (sp->vlgrp && vlan_tx_tag_present(skb)) {
vlan_tag = vlan_tx_tag_get(skb);
@@ -3900,14 +4043,6 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
- /* A buffer with no data will be dropped */
- if (!skb->len) {
- DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
- dev_kfree_skb(skb);
- spin_unlock_irqrestore(&sp->tx_lock, flags);
- return 0;
- }
-
offload_type = s2io_offload_type(skb);
if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
txdp->Control_1 |= TXD_TCP_LSO_EN;
@@ -4003,7 +4138,7 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
put_off, get_off);
netif_stop_queue(dev);
}
-
+ mac_control->stats_info->sw_stat.mem_allocated += skb->truesize;
dev->trans_start = jiffies;
spin_unlock_irqrestore(&sp->tx_lock, flags);
@@ -4775,6 +4910,40 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
return 0;
}
+static void s2io_ethtool_gringparam(struct net_device *dev,
+ struct ethtool_ringparam *ering)
+{
+ struct s2io_nic *sp = dev->priv;
+ int i,tx_desc_count=0,rx_desc_count=0;
+
+ if (sp->rxd_mode == RXD_MODE_1)
+ ering->rx_max_pending = MAX_RX_DESC_1;
+ else if (sp->rxd_mode == RXD_MODE_3B)
+ ering->rx_max_pending = MAX_RX_DESC_2;
+ else if (sp->rxd_mode == RXD_MODE_3A)
+ ering->rx_max_pending = MAX_RX_DESC_3;
+
+ ering->tx_max_pending = MAX_TX_DESC;
+ for (i = 0 ; i < sp->config.tx_fifo_num ; i++) {
+ tx_desc_count += sp->config.tx_cfg[i].fifo_len;
+ }
+ DBG_PRINT(INFO_DBG,"\nmax txds : %d\n",sp->config.max_txds);
+ ering->tx_pending = tx_desc_count;
+ rx_desc_count = 0;
+ for (i = 0 ; i < sp->config.rx_ring_num ; i++) {
+ rx_desc_count += sp->config.rx_cfg[i].num_rxd;
+ }
+ ering->rx_pending = rx_desc_count;
+
+ ering->rx_mini_max_pending = 0;
+ ering->rx_mini_pending = 0;
+ if(sp->rxd_mode == RXD_MODE_1)
+ ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
+ else if (sp->rxd_mode == RXD_MODE_3B)
+ ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
+ ering->rx_jumbo_pending = rx_desc_count;
+}
+
/**
* s2io_ethtool_getpause_data -Pause frame frame generation and reception.
* @sp : private member of the device structure, which is a pointer to the
@@ -4981,8 +5150,11 @@ static void s2io_vpd_read(struct s2io_nic *nic)
strcpy(nic->serial_num, "NOT AVAILABLE");
vpd_data = kmalloc(256, GFP_KERNEL);
- if (!vpd_data)
+ if (!vpd_data) {
+ nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
return;
+ }
+ nic->mac_control.stats_info->sw_stat.mem_allocated += 256;
for (i = 0; i < 256; i +=4 ) {
pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
@@ -5022,6 +5194,7 @@ static void s2io_vpd_read(struct s2io_nic *nic)
memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
}
kfree(vpd_data);
+ nic->mac_control.stats_info->sw_stat.mem_freed += 256;
}
/**
@@ -5742,6 +5915,30 @@ static void s2io_get_ethtool_stats(struct net_device *dev,
}
else
tmp_stats[i++] = 0;
+ tmp_stats[i++] = stat_info->sw_stat.mem_alloc_fail_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.watchdog_timer_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.mem_allocated;
+ tmp_stats[i++] = stat_info->sw_stat.mem_freed;
+ tmp_stats[i++] = stat_info->sw_stat.link_up_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.link_down_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.link_up_time;
+ tmp_stats[i++] = stat_info->sw_stat.link_down_time;
+
+ tmp_stats[i++] = stat_info->sw_stat.tx_buf_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_desc_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_parity_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_link_loss_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.tx_list_proc_err_cnt;
+
+ tmp_stats[i++] = stat_info->sw_stat.rx_parity_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_parity_abort_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_rda_fail_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_unkn_prot_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_fcs_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_buf_size_err_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_rxd_corrupt_cnt;
+ tmp_stats[i++] = stat_info->sw_stat.rx_unkn_err_cnt;
}
static int s2io_ethtool_get_regs_len(struct net_device *dev)
@@ -5854,6 +6051,7 @@ static const struct ethtool_ops netdev_ethtool_ops = {
.get_eeprom_len = s2io_get_eeprom_len,
.get_eeprom = s2io_ethtool_geeprom,
.set_eeprom = s2io_ethtool_seeprom,
+ .get_ringparam = s2io_ethtool_gringparam,
.get_pauseparam = s2io_ethtool_getpause_data,
.set_pauseparam = s2io_ethtool_setpause_data,
.get_rx_csum = s2io_ethtool_get_rx_csum,
@@ -5962,7 +6160,7 @@ static void s2io_tasklet(unsigned long dev_addr)
if (ret == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s: Out of ",
dev->name);
- DBG_PRINT(ERR_DBG, "memory in tasklet\n");
+ DBG_PRINT(INFO_DBG, "memory in tasklet\n");
break;
} else if (ret == -EFILL) {
DBG_PRINT(INFO_DBG,
@@ -6077,9 +6275,14 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
*skb = dev_alloc_skb(size);
if (!(*skb)) {
DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
- DBG_PRINT(INFO_DBG, "memory to allocate SKBs\n");
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "1 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
/* storing the mapped addr in a temp variable
* such it will be used for next rxd whose
* Host Control is NULL
@@ -6099,10 +6302,15 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "2 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
@@ -6126,10 +6334,15 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
- DBG_PRINT(INFO_DBG, "%s: dev_alloc_skb failed\n",
- dev->name);
+ DBG_PRINT(INFO_DBG, "%s: Out of ", dev->name);
+ DBG_PRINT(INFO_DBG, "memory to allocate ");
+ DBG_PRINT(INFO_DBG, "3 buf mode SKBs\n");
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM;
}
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += (*skb)->truesize;
((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
@@ -6147,10 +6360,14 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
if (skb_shinfo(*skb)->frag_list == NULL) {
DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb \
failed\n ", dev->name);
+ sp->mac_control.stats_info->sw_stat. \
+ mem_alloc_fail_cnt++;
return -ENOMEM ;
}
frag_list = skb_shinfo(*skb)->frag_list;
frag_list->next = NULL;
+ sp->mac_control.stats_info->sw_stat.mem_allocated
+ += frag_list->truesize;
/*
* Buffer-2 receives L4 data payload
*/
@@ -6566,6 +6783,7 @@ static void s2io_tx_watchdog(struct net_device *dev)
struct s2io_nic *sp = dev->priv;
if (netif_carrier_ok(dev)) {
+ sp->mac_control.stats_info->sw_stat.watchdog_timer_cnt++;
schedule_work(&sp->rst_timer_task);
sp->mac_control.stats_info->sw_stat.soft_reset_cnt++;
}
@@ -6606,7 +6824,53 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
if (err & 0x1) {
sp->mac_control.stats_info->sw_stat.parity_err_cnt++;
}
+ err >>= 48;
+ switch(err) {
+ case 1:
+ sp->mac_control.stats_info->sw_stat.
+ rx_parity_err_cnt++;
+ break;
+ case 2:
+ sp->mac_control.stats_info->sw_stat.
+ rx_abort_cnt++;
+ break;
+
+ case 3:
+ sp->mac_control.stats_info->sw_stat.
+ rx_parity_abort_cnt++;
+ break;
+
+ case 4:
+ sp->mac_control.stats_info->sw_stat.
+ rx_rda_fail_cnt++;
+ break;
+
+ case 5:
+ sp->mac_control.stats_info->sw_stat.
+ rx_unkn_prot_cnt++;
+ break;
+
+ case 6:
+ sp->mac_control.stats_info->sw_stat.
+ rx_fcs_err_cnt++;
+ break;
+
+ case 7:
+ sp->mac_control.stats_info->sw_stat.
+ rx_buf_size_err_cnt++;
+ break;
+
+ case 8:
+ sp->mac_control.stats_info->sw_stat.
+ rx_rxd_corrupt_cnt++;
+ break;
+
+ case 15:
+ sp->mac_control.stats_info->sw_stat.
+ rx_unkn_err_cnt++;
+ break;
+ }
/*
* Drop the packet if bad transfer code. Exception being
* 0x5, which could be due to unsupported IPv6 extension header.
@@ -6614,10 +6878,12 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
* Note that in this case, since checksum will be incorrect,
* stack will validate the same.
*/
- if (err && ((err >> 48) != 0x5)) {
+ if (err != 0x5) {
DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
dev->name, err);
sp->stats.rx_crc_errors++;
+ sp->mac_control.stats_info->sw_stat.mem_freed
+ += skb->truesize;
dev_kfree_skb(skb);
atomic_dec(&sp->rx_bufs_left[ring_no]);
rxdp->Host_Control = 0;
@@ -6627,7 +6893,6 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
/* Updating statistics */
rxdp->Host_Control = 0;
- sp->stats.rx_packets++;
if (sp->rxd_mode == RXD_MODE_1) {
int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
@@ -6731,7 +6996,7 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
} else {
skb->ip_summed = CHECKSUM_NONE;
}
-
+ sp->mac_control.stats_info->sw_stat.mem_freed += skb->truesize;
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
@@ -6780,12 +7045,21 @@ static void s2io_link(struct s2io_nic * sp, int link)
if (link == LINK_DOWN) {
DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
netif_carrier_off(dev);
+ if(sp->mac_control.stats_info->sw_stat.link_up_cnt)
+ sp->mac_control.stats_info->sw_stat.link_up_time =
+ jiffies - sp->start_time;
+ sp->mac_control.stats_info->sw_stat.link_down_cnt++;
} else {
DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
+ if (sp->mac_control.stats_info->sw_stat.link_down_cnt)
+ sp->mac_control.stats_info->sw_stat.link_down_time =
+ jiffies - sp->start_time;
+ sp->mac_control.stats_info->sw_stat.link_up_cnt++;
netif_carrier_on(dev);
}
}
sp->last_link_state = link;
+ sp->start_time = jiffies;
}
/**
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index a656d18..54baa0b 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -95,6 +95,32 @@ struct swStat {
unsigned long long flush_max_pkts;
unsigned long long sum_avg_pkts_aggregated;
unsigned long long num_aggregations;
+ /* Other statistics */
+ unsigned long long mem_alloc_fail_cnt;
+ unsigned long long watchdog_timer_cnt;
+ unsigned long long mem_allocated;
+ unsigned long long mem_freed;
+ unsigned long long link_up_cnt;
+ unsigned long long link_down_cnt;
+ unsigned long long link_up_time;
+ unsigned long long link_down_time;
+
+ /* Transfer Code statistics */
+ unsigned long long tx_buf_abort_cnt;
+ unsigned long long tx_desc_abort_cnt;
+ unsigned long long tx_parity_err_cnt;
+ unsigned long long tx_link_loss_cnt;
+ unsigned long long tx_list_proc_err_cnt;
+
+ unsigned long long rx_parity_err_cnt;
+ unsigned long long rx_abort_cnt;
+ unsigned long long rx_parity_abort_cnt;
+ unsigned long long rx_rda_fail_cnt;
+ unsigned long long rx_unkn_prot_cnt;
+ unsigned long long rx_fcs_err_cnt;
+ unsigned long long rx_buf_size_err_cnt;
+ unsigned long long rx_rxd_corrupt_cnt;
+ unsigned long long rx_unkn_err_cnt;
};
/* Xpak releated alarm and warnings */
@@ -308,6 +334,11 @@ struct stat_block {
#define MAX_TX_FIFOS 8
#define MAX_RX_RINGS 8
+#define MAX_RX_DESC_1 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
+#define MAX_RX_DESC_2 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_RX_DESC_3 (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_TX_DESC (MAX_AVAILABLE_TXDS)
+
/* FIFO mappings for all possible number of fifos configured */
static int fifo_map[][MAX_TX_FIFOS] = {
{0, 0, 0, 0, 0, 0, 0, 0},
@@ -819,6 +850,7 @@ struct s2io_nic {
#define LINK_UP 2
int task_flag;
+ unsigned long long start_time;
#define CARD_DOWN 1
#define CARD_UP 2
atomic_t card_state;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index e048957..7766929 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3802,6 +3802,9 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err, wol = 0;
+ if (!hw)
+ return 0;
+
err = pci_save_state(pdev);
if (err)
return err;
@@ -3830,6 +3833,9 @@ static int skge_resume(struct pci_dev *pdev)
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
+ if (!hw)
+ return 0;
+
err = pci_set_power_state(pdev, PCI_D0);
if (err)
goto out;
@@ -3868,6 +3874,9 @@ static void skge_shutdown(struct pci_dev *pdev)
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return;
+
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct skge_port *skge = netdev_priv(dev);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a307310..104e204 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -40,6 +40,7 @@
#include <linux/if_vlan.h>
#include <linux/prefetch.h>
#include <linux/mii.h>
+#include <linux/dmi.h>
#include <asm/irq.h>
@@ -130,7 +131,7 @@ static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
- { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+// { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
{ 0 }
};
@@ -150,6 +151,8 @@ static const char *yukon2_name[] = {
"FE", /* 0xb7 */
};
+static int dmi_blacklisted;
+
/* Access to external PHY */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
@@ -2531,6 +2534,17 @@ static int __devinit sky2_init(struct sky2_hw *hw)
return -EOPNOTSUPP;
}
+
+ /* Some Gigabyte motherboards have 88e8056 but cause problems
+ * There is some unresolved hardware related problem that causes
+ * descriptor errors and receive data corruption.
+ */
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U && dmi_blacklisted) {
+ dev_err(&hw->pdev->dev,
+ "88E8056 on this motherboard not supported\n");
+ return -EOPNOTSUPP;
+ }
+
hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
hw->ports = 1;
t8 = sky2_read8(hw, B2_Y2_HW_RES);
@@ -3578,17 +3592,6 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
goto err_out;
}
- /* Some Gigabyte motherboards have 88e8056 but cause problems
- * There is some unresolved hardware related problem that causes
- * descriptor errors and receive data corruption.
- */
- if (pdev->vendor == PCI_VENDOR_ID_MARVELL &&
- pdev->device == 0x4364 && pdev->subsystem_vendor == 0x1458) {
- dev_err(&pdev->dev,
- "88E8056 on Gigabyte motherboards not supported\n");
- goto err_out_disable;
- }
-
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "cannot obtain PCI resources\n");
@@ -3732,6 +3735,7 @@ err_out_free_regions:
err_out_disable:
pci_disable_device(pdev);
err_out:
+ pci_set_drvdata(pdev, NULL);
return err;
}
@@ -3784,6 +3788,9 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return 0;
+
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
@@ -3815,6 +3822,9 @@ static int sky2_resume(struct pci_dev *pdev)
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, err;
+ if (!hw)
+ return 0;
+
err = pci_set_power_state(pdev, PCI_D0);
if (err)
goto out;
@@ -3861,6 +3871,9 @@ static void sky2_shutdown(struct pci_dev *pdev)
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, wol = 0;
+ if (!hw)
+ return;
+
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
@@ -3897,8 +3910,24 @@ static struct pci_driver sky2_driver = {
.shutdown = sky2_shutdown,
};
+static struct dmi_system_id __initdata broken_dmi_table[] = {
+ {
+ .ident = "Gigabyte 965P-S3",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gigabyte Technology Co., Ltd."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "965P-S3"),
+
+ },
+ },
+ { }
+};
+
static int __init sky2_init_module(void)
{
+ /* Look for sick motherboards */
+ if (dmi_check_system(broken_dmi_table))
+ dmi_blacklisted = 1;
+
return pci_register_driver(&sky2_driver);
}
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index c15e972..108adbf 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -175,12 +175,10 @@ spider_net_setup_aneg(struct spider_net_card *card)
{
struct mii_phy *phy = &card->phy;
u32 advertise = 0;
- u16 bmcr, bmsr, stat1000, estat;
+ u16 bmsr, estat;
- bmcr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMCR);
- bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
- stat1000 = spider_net_read_phy(card->netdev, phy->mii_id, MII_STAT1000);
- estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
+ bmsr = spider_net_read_phy(card->netdev, phy->mii_id, MII_BMSR);
+ estat = spider_net_read_phy(card->netdev, phy->mii_id, MII_ESTATUS);
if (bmsr & BMSR_10HALF)
advertise |= ADVERTISED_10baseT_Half;
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 8897f53..4fc8681 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -2,10 +2,7 @@
# wan devices configuration
#
-menu "Wan interfaces"
- depends on NETDEVICES
-
-config WAN
+menuconfig WAN
bool "Wan interfaces support"
---help---
Wide Area Networks (WANs), such as X.25, Frame Relay and leased
@@ -23,10 +20,12 @@ config WAN
If unsure, say N.
+if WAN
+
# There is no way to detect a comtrol sv11 - force it modular for now.
config HOSTESS_SV11
tristate "Comtrol Hostess SV-11 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
Driver for Comtrol Hostess SV-11 network card which
operates on low speed synchronous serial links at up to
@@ -38,7 +37,7 @@ config HOSTESS_SV11
# The COSA/SRP driver has not been tested as non-modular yet.
config COSA
tristate "COSA/SRP sync serial boards support"
- depends on WAN && ISA && m && ISA_DMA_API
+ depends on ISA && m && ISA_DMA_API
---help---
Driver for COSA and SRP synchronous serial boards.
@@ -62,7 +61,7 @@ config COSA
#
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
- depends on WAN && PCI
+ depends on PCI
---help---
Driver for the following Lan Media family of serial boards:
@@ -89,7 +88,7 @@ config LANMEDIA
# There is no way to detect a Sealevel board. Force it modular
config SEALEVEL_4021
tristate "Sealevel Systems 4021 support"
- depends on WAN && ISA && m && ISA_DMA_API && INET
+ depends on ISA && m && ISA_DMA_API && INET
help
This is a driver for the Sealevel Systems ACB 56 serial I/O adapter.
@@ -99,7 +98,6 @@ config SEALEVEL_4021
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
- depends on WAN
help
Say Y to this option if your Linux box contains a WAN (Wide Area
Network) card supported by this driver and you are planning to
@@ -167,7 +165,7 @@ config HDLC_X25
If unsure, say N.
comment "X.25/LAPB support is disabled"
- depends on WAN && HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
+ depends on HDLC && (LAPB!=m || HDLC!=m) && LAPB!=y
config PCI200SYN
tristate "Goramo PCI200SYN support"
@@ -230,10 +228,10 @@ config PC300_MLPPP
Multilink PPP over the PC300 synchronous communication boards.
comment "Cyclades-PC300 MLPPP support is disabled."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
comment "Refer to the file README.mlppp, provided by PC300 package."
- depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+ depends on HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
config PC300TOO
tristate "Cyclades PC300 RSV/X21 alternative support"
@@ -338,7 +336,6 @@ config DSCC4_PCI_RST
config DLCI
tristate "Frame Relay DLCI support"
- depends on WAN
---help---
Support for the Frame Relay protocol.
@@ -385,7 +382,7 @@ config SDLA
# Wan router core.
config WAN_ROUTER_DRIVERS
tristate "WAN router drivers"
- depends on WAN && WAN_ROUTER
+ depends on WAN_ROUTER
---help---
Connect LAN to WAN via Linux box.
@@ -440,7 +437,7 @@ config CYCLOMX_X25
# X.25 network drivers
config LAPBETHER
tristate "LAPB over Ethernet driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Driver for a pseudo device (typically called /dev/lapb0) which allows
you to open an LAPB point-to-point connection to some other computer
@@ -456,7 +453,7 @@ config LAPBETHER
config X25_ASY
tristate "X.25 async driver (EXPERIMENTAL)"
- depends on WAN && LAPB && X25
+ depends on LAPB && X25
---help---
Send and receive X.25 frames over regular asynchronous serial
lines such as telephone lines equipped with ordinary modems.
@@ -471,7 +468,7 @@ config X25_ASY
config SBNI
tristate "Granch SBNI12 Leased Line adapter support"
- depends on WAN && X86
+ depends on X86
---help---
Driver for ISA SBNI12-xx cards which are low cost alternatives to
leased line modems.
@@ -497,5 +494,4 @@ config SBNI_MULTILINE
If unsure, say N.
-endmenu
-
+endif # WAN
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index 19c9350..56a8ea1 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -1,5 +1,3 @@
-# EXTRA_CFLAGS += -Wpacked
-
usb8xxx-objs := main.o fw.o wext.o \
rx.o tx.o cmd.o \
cmdresp.o scan.o \
@@ -7,13 +5,6 @@ usb8xxx-objs := main.o fw.o wext.o \
ioctl.o debugfs.o \
ethtool.o assoc.o
-ifeq ($(CONFIG_LIBERTAS_USB_DEBUG), y)
-EXTRA_CFLAGS += -DDEBUG -DPROC_DEBUG
-endif
-
-
-# This is needed to support the newer boot2 bootloader (v >= 3104)
-EXTRA_CFLAGS += -DSUPPORT_BOOT_COMMAND
usb8xxx-objs += if_bootcmd.o
usb8xxx-objs += if_usb.o
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 688da4c..3785772 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -40,64 +40,11 @@ NAME
SYNOPSIS
iwpriv <ethX> <command> [sub-command] ...
- iwpriv ethX version
- iwpriv ethX scantype [sub-command]
- iwpriv ethX getSNR <n>
- iwpriv ethX getNF <n>
- iwpriv ethX getRSSI <n>
- iwpriv ethX setrxant <n>
- iwpriv ethX getrxant
- iwpriv ethX settxant <n>
- iwpriv ethX gettxant
- iwpriv ethX authalgs <n>
- iwpriv ethX pre-TBTT <n>
- iwpriv ethX 8021xauthalgs <n>
- iwpriv ethX encryptionmode <n>
iwpriv ethX setregioncode <n>
iwpriv ethX getregioncode
- iwpriv ethX setbcnavg <n>
- iwpriv ethX getbcnavg
- iwpriv ethX setdataavg <n>
- iwpriv ethX setlisteninter <n>
- iwpriv ethX getlisteninter
- iwpriv ethX setmultipledtim <n>
- iwpriv ethX getmultipledtim
- iwpriv ethX atimwindow <n>
- iwpriv ethX deauth
- iwpriv ethX adhocstop
- iwpriv ethX radioon
- iwpriv ethX radiooff
- iwpriv ethX reasso-on
- iwpriv ethX reasso-off
- iwpriv ethX scanmode [sub-command]
- iwpriv ethX setwpaie <n>
- iwpriv ethX wlanidle-off
- iwpriv ethX wlanidle-on
- iwpriv ethX getcis
- iwpriv ethX getlog
- iwpriv ethX getadhocstatus
- iwpriv ethX adhocgrate <n>
-
-Version 4 Command:
- iwpriv ethX inactvityto <n>
- iwpriv ethX sleeppd <n>
- iwpriv ethX enable11d <n>
- iwpriv ethX tpccfg <n>
- iwpriv ethX powercfg <n>
- iwpriv ethX setafc <n>
- iwpriv ethX getafc
Version 5 Command:
iwpriv ethX ledgpio <n>
- iwpriv ethX scanprobes <n>
- iwpriv ethX lolisteninter <n>
- iwpriv ethX rateadapt <n> <m>
- iwpriv ethX txcontrol <n>
- iwpriv ethX psnullinterval <n>
- iwpriv ethX prescan <n>
- iwpriv ethX getrxinfo
- iwpriv ethX gettxrate
- iwpriv ethX beaconinterval
BT Commands:
The blinding table (BT) contains a list of mac addresses that should be
@@ -150,114 +97,6 @@ DESCRIPTION
The ethX parameter specifies the network device that is to be used to
perform this command on. it could be eth0, eth1 etc.
-version
- This is used to get the current version of the driver and the firmware.
-
-scantype
- This command is used to set the scan type to be used by the driver in
- the scan command. This setting will not be used while performing a scan
- for a specific SSID, as it is always done with scan type being active.
-
- where the sub-commands are: -
- active -- to set the scan type to active
- passive -- to set the scan type to passive
- get -- to get the scan type set in the driver
-
-getSNR
- This command gets the average and non average value of Signal to Noise
- Ratio of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- If no value is given, all four values are returned in the order mentioned
- above.
-
- Note: This command is available only when STA is connected.
-
-getRSSI
- This command gets the average and non average value os Receive Signal
- Strength of Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-getNF
- This command gets the average and non average value of Noise Floor of
- Beacon and Data.
-
- where value is:-
- 0 -- Beacon non-average.
- 1 -- Beacon average.
- 2 -- Data non-average.
- 3 -- Data average.
-
- Note: This command is available only when STA is connected.
-
-setrxant
- This command is used to set the mode for Rx antenna.
-
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
-
- Usage:
- iwpriv ethX setrxant 0x01: select Antenna 1.
-
-getrxant
- This command is used to get the mode for Rx antenna.
-
-
-settxant
- This command is used to set the mode for Tx antenna.
- The options that can be sent are:-
- 1 -- Antenna 1.
- 2 -- Antenna 2.
- 0xFFFF -- Diversity.
- Usage:
- iwpriv ethX settxant 0x01: select Antenna 1.
-
-gettxant
- This command is used to get the mode for Tx antenna.
-
-authalgs
- This command is used by the WPA supplicant to set the authentication
- algorithms in the station.
-
-8021xauthalgs
- This command is used by the WPA supplicant to set the 8021.x authentication algorithm type
- station.
-
- where values can be:-
- 1 -- None
- 2 -- LEAP
- 4 -- TLS
- 8 -- TTLs
- 16 -- MD5
-
-
-encryptionmode
- This command is used by the WPA supplicant to set the encryption algorithm.
-
- where values can be:-
- 0 -- NONE
- 1 -- WEP40
- 2 -- TKIP
- 3 -- CCMP
- 4 -- WEP104
-
-pre-TBTT
- This command is used to set pre-TBTT time period where value is in microseconds.
-
setregioncode
This command is used to set the region code in the station.
where value is 'region code' for various regions like
@@ -270,114 +109,6 @@ getregioncode
This command is used to get the region code information set in the
station.
-setbcnavg
- Set the weighting factor for calculating RSSI.
-
-getbcnavg
- Get weighting factor for calculating RSSI.
-
-setdataavg
- Set the weighting factor for calculating SNR.
-
-setlisteninter
- This command is used to set the listen interval in the
- station.
-
- where the value ranges between 1 - 255
-
-getlisteninter
- This command is used to get the listen interval value set in the
- station.
-
-setmultipledtim
- This command is used to set the multiple dtim value in the
- station.
- where the value is 1,2,3,4,5,0xfffe
- 0xfffe means the firmware will use listen interval in association
- command for waking up
-
-getmultipledtim
- This command is used to get the multiple dtim value set in the station.
-
-atimwindow
- This command is used to set the atim value in the
- station.
-
- where the value ranges between 0 - 50
-
-deauth
- This command is used to send the de-authentication to the AP with which
- the station is associated. This command is valid only when
- station is in Infrastructure mode.
-
- Note: This command is available only when STA is connected.
-
-adhocstop
- This command is used to stop beacon transmission from the station and
- go into idle state in ad-hoc mode.
-
- Note: This command is available only when STA is connected.
-
-radioon
- This command is used to turn on the RF antenna.
-
-radiooff
- This command is sued to turn off the RF antenna.
-
-scanmode
- This command is used to set the station to scan for either IBSS
- networks or BSS networks or both BSS and IBSS networks. This
- command can be used with sub commands,
-
- where the value for
- bss -- Scan All the BSS networks.
- ibss -- Scan All the IBSS networks.
- any -- Scan both BSS and IBSS networks.
-
-
-
-setwpaie
- This command is used by WPA supplicant to send the WPA-IE to the driver.
-
-wlanidle-off
- This command is used to get into idle state.
-
- Note: This command is available only when STA is connected.
-
-wlanidle-on
- This command is used to get off the idle state.
-
- Note: This command is available only when STA is connected.
-
-
-getlog
- This command is used to get the 802.11 statistics available in the
- station.
-
- Note: This command is available only when STA is connected.
-
-getadhocstatus
- This command is used to get the ad-hoc Network Status.
-
- The various status codes are:
- AdhocStarted
- AdhocJoined
- AdhocIdle
- InfraMode
- AutoUnknownMode
-
- Note: This command is available only when STA is connected.
-
-adhocgrate
- This command is used to enable(1) g_rate, Disable(0) g_rate
- and request(2) the status which g_rate is disabled/enabled,
- for Ad-hoc creator.
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
ledgpio
This command is used to set/get LEDs.
@@ -400,253 +131,6 @@ ledgpio
Note: LED0 is invalid
Note: Maximum Number of LEDs are 16.
-inactivityto
- This command is used by the host to set/get the inactivity timeout value,
- which specifies when WLAN device is put to sleep.
-
- Usage:
- iwpriv ethX inactivityto [<timeout>]
-
- where the parameter are:
- timeout: timeout value in milliseconds.
-
- Example:
- iwpriv eth1 inactivityto
- "get the timeout value"
-
- iwpriv eth1 inactivityto X
- "set timeout value to X ms"
-
-
-sleeppd
- This command is used to configure the sleep period of the WLAN device.
-
- Usage:
- iwpriv ethX sleeppd [<sleep period>]
-
- where the parameter are:
- Period: sleep period in milliseconds. Range 10~60.
-
- Example:
- iwpriv eth1 sleeppd 10
- "set period as 10 ms"
- iwpriv eth1 sleeppd
- "get the sleep period configuration"
-
-enable11d
- This command is used to control 11d
- where value is:-
- 1 -- Enabled
- 0 -- Disabled
- 2 -- Get
-
-
-
-
-tpccfg
- Enables or disables automatic transmit power control.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply four more parameters in the following
- order:
- -UseSNR (Use SNR (in addition to PER) for TPC algorithm),
- -P0 (P0 power level for TPC),
- -P1 (P1 power level for TPC),
- -P2 (P2 power level for TPC).
-
- Usage:
- iwpriv ethX tpccfg: Get current configuration
- iwpriv ethX tpccfg 0: disable auto TPC
- iwpriv ethX tpccfg 0x01 0x00 0x05 0x0a 0x0d: enable auto TPC; do not use SNR;
- P0=0x05; P1=0x0a; P2=0x0d;
- iwpriv ethX tpccfg 0x01 0x01 0x05 0x0a 0x0d: enable auto TPC; use SNR;
- P0=0x05; P1=0x0a; P2=0x0d.
-
-powercfg
- Enables or disables power adaptation.
-
- The first parameter turns this feature on (1) or off (0). When turning
- on, the user must also supply three more parameters in the following
- order:
- -P0 (P0 power level for Power Adaptation),
- -P1 (P1 power level for Power Adaptation),
- -P2 (P2 power level for Power Adaptation).
-
- Usage:
- iwpriv ethX powercfg: Get current configuration
- iwpriv ethX powercfg 0: disable power adaptation
- iwpriv ethX powercfg 1 0x0d 0x0f 0x12: enable power adaptation;
- P0=0x0d; P1=0x0f; P2=0x12.
-
-getafc
- This command returns automatic frequency control parameters. It returns
- three integers:
- -P0: automatic is on (1), or off (0),
- -P1: current timing offset in PPM (part per million), and
- -P2: current frequency offset in PPM.
-
-setafc
- Set automatic frequency control options.
-
- The first parameter turns automatic on (1) or off (0).
- The user must supply two more parameters in either case, in the following
- order:
-
- When auto is on:
-
- -P0 (automatic adjustment frequency threshold in PPM),
- -P1 (automatic adjustment period in beacon period),
-
- When auto is off:
-
- -P0 (manual adjustment timing offset in PPM), and
- -P1 (manual adjustment frequency offset in PPM).
-
- Usage:
- iwpriv ethX setafc 0 10 10: manual adjustment, both timing and frequcncy
- offset are 10 PPM.
-
- iwpriv ethX setafc 1 10 10 enable afc, automatic adjustment,
- frequency threshold 10 PPM, for every 10 beacon periods.
-
-
-
-scanprobes
- This command sets number of probe requests per channel.
-
- Usage:
- iwpriv ethX scanprobes 3 (set scan probes to 3)
- iwpriv ethX scanprobes (get scan probes)
-
-lolisteninter
- This command sets the value of listen interval.
-
- Usage:
- iwpriv ethX lolisteninter 234 (set the lolisteninter to 234)
- iwpriv ethX lolisteninter (get the lolisteninter value)
-
-rateadapt
- This command sets the data rates bitmap.
- Where <n>
- 0: Disable auto rate adapt
- 1: Enable auto rate adapt
-
- <m>
- data rate bitmap
- Bit Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 12-15 Reserved
-
- Usage:
- iwpriv ethX rateadapt
- read the currect data rate setting
- iwpriv ethX rateadapt 1 0x07
- enable auto data rate adapt and
- data rates are 1Mbps, 2Mbsp and 5.5Mbps
-
-
-txcontrol
- This command is used to set the Tx rate, ack policy, and retry limit on a per packet basis.
-
- Where value <n> is:
- if bit[4] == 1:
- bit[3:0] -- 0 1 2 3 4 5 6 7 8 9 10 11 12 13-16
- Data Rate(Mbps) -- 1 2 5.5 11 Rsv 6 9 12 18 24 36 48 54 Rsv
-
- bit[12:8]
- if bit[12] == 1, bit[11:8] specifies the Tx retry limit.
-
- bit[14:13] specifies per packet ack policy:
- bit[14:13]
- 1 0 use immediate ack policy for this packet
- 1 1 use no ack policy for this packet
- 0 x use the per-packet ack policy setting
-
- Usage:
- iwpriv ethX txcontrol 0x7513
- Use no-ack policy, 5 retires for Tx, 11Mbps rate
-
-
-
-psnullinterval
- This command is used to set/request NULL package interval for Power Save
- under infrastructure mode.
-
- where value is:-
- -1 -- Disabled
- n>0 -- Set interval as n (seconds)
-
-prescan
- This command is used to enable (1)/disable(0) auto prescan before assoicate to the ap
-
- where value is:-
- 0 -- Disabled
- 1 -- Enabled
- 2 -- Get
-
-getrxinfo
- This command gets non average value of Signal to Noise Ratio of Data and rate index.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-gettxrate
- This command gets current Tx rate index of the first packet associated with Rate Adaptation.
-
- The following table shows RateIndex and Rate
-
- RateIndex Data rate
- 0 1 Mbps
- 1 2 Mbps
- 2 5.5 Mbps
- 3 11 Mbps
- 4 Reserved
- 5 6 Mbps
- 6 9 Mbps
- 7 12 Mbps
- 8 18 Mbps
- 9 24 Mbps
- 10 36 Mbps
- 11 48 Mbps
- 12 54 Mbps
- 13-15 Reserved
-
-bcninterval
- This command is used to sets beacon interval in adhoc mode when an argument is given, and gets current adhoc
- beacon interval when no argument is given. The valid beacon interval is between 20 - 1000,
- default beacon interval is 100.
-
- Usage:
- iwpriv ethX bcninterval 100 (set adhoc beacon interval to 100)
- iwpriv ethX bcninterval (get adhoc beacon interval)
-
fwt_add
This command is used to insert an entry into the FWT table. The list of
parameters must follow the following structure:
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index b55c7f5..c260bd1 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -23,13 +23,13 @@ static int assoc_helper_essid(wlan_private *priv,
ENTER();
lbs_pr_debug(1, "New SSID requested: %s\n", assoc_req->ssid.ssid);
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
if (adapter->prescan) {
libertas_send_specific_SSID_scan(priv, &assoc_req->ssid, 1);
}
i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid,
- NULL, wlan802_11infrastructure);
+ NULL, IW_MODE_INFRA);
if (i >= 0) {
lbs_pr_debug(1,
"SSID found in scan list ... associating...\n");
@@ -44,7 +44,7 @@ static int assoc_helper_essid(wlan_private *priv,
lbs_pr_debug(1, "SSID '%s' not found; cannot associate\n",
assoc_req->ssid.ssid);
}
- } else if (assoc_req->mode == wlan802_11ibss) {
+ } else if (assoc_req->mode == IW_MODE_ADHOC) {
/* Scan for the network, do not save previous results. Stale
* scan data will cause us to join a non-existant adhoc network
*/
@@ -52,7 +52,7 @@ static int assoc_helper_essid(wlan_private *priv,
/* Search for the requested SSID in the scan table */
i = libertas_find_SSID_in_list(adapter, &assoc_req->ssid, NULL,
- wlan802_11ibss);
+ IW_MODE_ADHOC);
if (i >= 0) {
lbs_pr_debug(1, "SSID found at %d in List, so join\n", ret);
libertas_join_adhoc_network(priv, &adapter->scantable[i]);
@@ -90,10 +90,10 @@ static int assoc_helper_bssid(wlan_private *priv,
goto out;
}
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
ret = wlan_associate(priv, &adapter->scantable[i]);
lbs_pr_debug(1, "ASSOC: return from wlan_associate(bssd) was %d\n", ret);
- } else if (assoc_req->mode == wlan802_11ibss) {
+ } else if (assoc_req->mode == IW_MODE_ADHOC) {
libertas_join_adhoc_network(priv, &adapter->scantable[i]);
}
memcpy(&assoc_req->ssid, &adapter->scantable[i].ssid,
@@ -142,23 +142,23 @@ static int assoc_helper_mode(wlan_private *priv,
ENTER();
- if (assoc_req->mode == adapter->inframode) {
+ if (assoc_req->mode == adapter->mode) {
LEAVE();
return 0;
}
- if (assoc_req->mode == wlan802_11infrastructure) {
+ if (assoc_req->mode == IW_MODE_INFRA) {
if (adapter->psstate != PS_STATE_FULL_POWER)
libertas_ps_wakeup(priv, cmd_option_waitforrsp);
adapter->psmode = wlan802_11powermodecam;
}
- adapter->inframode = assoc_req->mode;
+ adapter->mode = assoc_req->mode;
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_snmp_mib,
0, cmd_option_waitforrsp,
OID_802_11_INFRASTRUCTURE_MODE,
- (void *) assoc_req->mode);
+ (void *) (size_t) assoc_req->mode);
LEAVE();
return ret;
@@ -196,7 +196,7 @@ static int assoc_helper_wep_keys(wlan_private *priv,
goto out;
/* enable/disable the MAC's WEP packet filter */
- if (assoc_req->secinfo.WEPstatus == wlan802_11WEPenabled)
+ if (assoc_req->secinfo.wep_enabled)
adapter->currentpacketfilter |= cmd_act_mac_wep_enable;
else
adapter->currentpacketfilter &= ~cmd_act_mac_wep_enable;
@@ -300,8 +300,7 @@ static int should_deauth_infrastructure(wlan_adapter *adapter,
}
if (test_bit(ASSOC_FLAG_SECINFO, &assoc_req->flags)) {
- if (adapter->secinfo.authmode !=
- assoc_req->secinfo.authmode) {
+ if (adapter->secinfo.auth_mode != assoc_req->secinfo.auth_mode) {
lbs_pr_debug(1, "Deauthenticating due to updated security "
"info in configuration request.\n");
return 1;
@@ -316,7 +315,7 @@ static int should_deauth_infrastructure(wlan_adapter *adapter,
/* FIXME: deal with 'auto' mode somehow */
if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
- if (assoc_req->mode != wlan802_11infrastructure)
+ if (assoc_req->mode != IW_MODE_INFRA)
return 1;
}
@@ -333,12 +332,12 @@ static int should_stop_adhoc(wlan_adapter *adapter,
if (adapter->curbssparams.ssid.ssidlength != assoc_req->ssid.ssidlength)
return 1;
if (memcmp(adapter->curbssparams.ssid.ssid, assoc_req->ssid.ssid,
- sizeof(struct WLAN_802_11_SSID)))
+ adapter->curbssparams.ssid.ssidlength))
return 1;
/* FIXME: deal with 'auto' mode somehow */
if (test_bit(ASSOC_FLAG_MODE, &assoc_req->flags)) {
- if (assoc_req->mode != wlan802_11ibss)
+ if (assoc_req->mode != IW_MODE_ADHOC)
return 1;
}
@@ -382,7 +381,7 @@ void wlan_association_worker(struct work_struct *work)
}
if (find_any_ssid) {
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE new_mode;
+ u8 new_mode;
ret = libertas_find_best_network_SSID(priv, &assoc_req->ssid,
assoc_req->mode, &new_mode);
@@ -393,7 +392,7 @@ void wlan_association_worker(struct work_struct *work)
}
/* Ensure we switch to the mode of the AP */
- if (assoc_req->mode == wlan802_11autounknown) {
+ if (assoc_req->mode == IW_MODE_AUTO) {
set_bit(ASSOC_FLAG_MODE, &assoc_req->flags);
assoc_req->mode = new_mode;
}
@@ -403,7 +402,7 @@ void wlan_association_worker(struct work_struct *work)
* Check if the attributes being changing require deauthentication
* from the currently associated infrastructure access point.
*/
- if (adapter->inframode == wlan802_11infrastructure) {
+ if (adapter->mode == IW_MODE_INFRA) {
if (should_deauth_infrastructure(adapter, assoc_req)) {
ret = libertas_send_deauthentication(priv);
if (ret) {
@@ -412,7 +411,7 @@ void wlan_association_worker(struct work_struct *work)
ret);
}
}
- } else if (adapter->inframode == wlan802_11ibss) {
+ } else if (adapter->mode == IW_MODE_ADHOC) {
if (should_stop_adhoc(adapter, assoc_req)) {
ret = libertas_stop_adhoc_network(priv);
if (ret) {
@@ -543,7 +542,7 @@ struct assoc_request * wlan_get_association_request(wlan_adapter *adapter)
assoc_req->channel = adapter->curbssparams.channel;
if (!test_bit(ASSOC_FLAG_MODE, &assoc_req->flags))
- assoc_req->mode = adapter->inframode;
+ assoc_req->mode = adapter->mode;
if (!test_bit(ASSOC_FLAG_BSSID, &assoc_req->flags)) {
memcpy(&assoc_req->bssid, adapter->curbssparams.bssid,
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index bfdac58..de9cb46 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -381,15 +381,16 @@ static int wlan_cmd_802_11_snmp_mib(wlan_private * priv,
switch (cmd_oid) {
case OID_802_11_INFRASTRUCTURE_MODE:
{
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode =
- (enum WLAN_802_11_NETWORK_INFRASTRUCTURE) pdata_buf;
+ u8 mode = (u8) (size_t) pdata_buf;
pSNMPMIB->querytype = cpu_to_le16(cmd_act_set);
pSNMPMIB->oid = cpu_to_le16((u16) desired_bsstype_i);
pSNMPMIB->bufsize = sizeof(u8);
- if (mode == wlan802_11infrastructure)
- ucTemp = SNMP_MIB_VALUE_INFRA;
- else
+ if (mode == IW_MODE_ADHOC) {
ucTemp = SNMP_MIB_VALUE_ADHOC;
+ } else {
+ /* Infra and Auto modes */
+ ucTemp = SNMP_MIB_VALUE_INFRA;
+ }
memmove(pSNMPMIB->value, &ucTemp, sizeof(u8));
@@ -947,8 +948,8 @@ void libertas_queue_cmd(wlan_adapter * adapter, struct cmd_ctrl_node *cmdnode, u
spin_unlock_irqrestore(&adapter->driver_lock, flags);
- lbs_pr_debug(1, "QUEUE_CMD: Inserted node=0x%x, cmd=0x%x in cmdpendingq\n",
- (u32) cmdnode,
+ lbs_pr_debug(1, "QUEUE_CMD: Inserted node=%p, cmd=0x%x in cmdpendingq\n",
+ cmdnode,
((struct cmd_ds_gen*)cmdnode->bufvirtualaddr)->command);
done:
@@ -976,8 +977,8 @@ static int DownloadcommandToStation(wlan_private * priv,
ENTER();
if (!adapter || !cmdnode) {
- lbs_pr_debug(1, "DNLD_CMD: adapter = %#x, cmdnode = %#x\n",
- (int)adapter, (int)cmdnode);
+ lbs_pr_debug(1, "DNLD_CMD: adapter = %p, cmdnode = %p\n",
+ adapter, cmdnode);
if (cmdnode) {
spin_lock_irqsave(&adapter->driver_lock, flags);
__libertas_cleanup_and_insert_cmd(priv, cmdnode);
@@ -1174,8 +1175,8 @@ int libertas_prepare_and_send_command(wlan_private * priv,
cmdptr = (struct cmd_ds_command *)cmdnode->bufvirtualaddr;
- lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr =0x%x, command=0x%X\n",
- (u32) cmdptr, cmd_no);
+ lbs_pr_debug(1, "PREP_CMD: Val of cmd ptr=%p, command=0x%X\n",
+ cmdptr, cmd_no);
if (!cmdptr) {
lbs_pr_debug(1, "PREP_CMD: bufvirtualaddr of cmdnode is NULL\n");
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index cdb012c..c864540 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -72,8 +72,6 @@ void libertas_mac_event_disconnected(wlan_private * priv)
adapter->secinfo.WPAenabled = 0;
adapter->secinfo.WPA2enabled = 0;
adapter->wpa_ie_len = 0;
- adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
- adapter->secinfo.Encryptionmode = CIPHER_NONE;
adapter->connect_status = libertas_disconnected;
@@ -811,7 +809,7 @@ int libertas_process_rx_command(wlan_private * priv)
if (result) {
lbs_pr_debug(1, "CMD_RESP: PS command failed- %#x \n",
resp->result);
- if (adapter->inframode == wlan802_11ibss) {
+ if (adapter->mode == IW_MODE_ADHOC) {
/*
* We should not re-try enter-ps command in
* ad-hoc mode. It takes place in
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 51dfd20..7d7bc5e 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -7,6 +7,7 @@
#include "dev.h"
#include "decl.h"
#include "host.h"
+#include "debugfs.h"
static struct dentry *libertas_dir = NULL;
static char *szStates[] = {
@@ -276,7 +277,7 @@ static void libertas_parse_ssid(char *buf, size_t count,
if (!end)
end = buf + count - 1;
- size = min(IW_ESSID_MAX_SIZE, end - hold);
+ size = min((size_t)IW_ESSID_MAX_SIZE, (size_t) (end - hold));
strncpy(scan_cfg->specificSSID, hold, size);
return;
@@ -1648,7 +1649,7 @@ struct libertas_debugfs_files {
struct file_operations fops;
};
-struct libertas_debugfs_files debugfs_files[] = {
+static struct libertas_debugfs_files debugfs_files[] = {
{ "info", 0444, FOPS(libertas_dev_info, write_file_dummy), },
{ "getscantable", 0444, FOPS(libertas_getscantable,
write_file_dummy), },
@@ -1658,7 +1659,7 @@ struct libertas_debugfs_files debugfs_files[] = {
{ "setuserscan", 0600, FOPS(NULL, libertas_setuserscan), },
};
-struct libertas_debugfs_files debugfs_events_files[] = {
+static struct libertas_debugfs_files debugfs_events_files[] = {
{"low_rssi", 0644, FOPS(libertas_lowrssi_read,
libertas_lowrssi_write), },
{"low_snr", 0644, FOPS(libertas_lowsnr_read,
@@ -1673,7 +1674,7 @@ struct libertas_debugfs_files debugfs_events_files[] = {
libertas_highsnr_write), },
};
-struct libertas_debugfs_files debugfs_regs_files[] = {
+static struct libertas_debugfs_files debugfs_regs_files[] = {
{"rdmac", 0644, FOPS(libertas_rdmac_read, libertas_rdmac_write), },
{"wrmac", 0600, FOPS(NULL, libertas_wrmac_write), },
{"rdbbp", 0644, FOPS(libertas_rdbbp_read, libertas_rdbbp_write), },
@@ -1778,7 +1779,7 @@ void libertas_debugfs_remove_one(wlan_private *priv)
struct debug_data {
char name[32];
u32 size;
- u32 addr;
+ size_t addr;
};
/* To debug any member of wlan_adapter, simply add one line here.
@@ -1825,6 +1826,8 @@ static ssize_t wlan_debugfs_read(struct file *file, char __user *userbuf,
val = *((u16 *) d[i].addr);
else if (d[i].size == 4)
val = *((u32 *) d[i].addr);
+ else if (d[i].size == 8)
+ val = *((u64 *) d[i].addr);
pos += sprintf(p + pos, "%s=%d\n", d[i].name, val);
}
@@ -1844,7 +1847,7 @@ static ssize_t wlan_debugfs_read(struct file *file, char __user *userbuf,
* @param data data to write
* @return number of data
*/
-static int wlan_debugfs_write(struct file *f, const char __user *buf,
+static ssize_t wlan_debugfs_write(struct file *f, const char __user *buf,
size_t cnt, loff_t *ppos)
{
int r, i;
@@ -1886,12 +1889,14 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
*((u16 *) d[i].addr) = (u16) r;
else if (d[i].size == 4)
*((u32 *) d[i].addr) = (u32) r;
+ else if (d[i].size == 8)
+ *((u64 *) d[i].addr) = (u64) r;
break;
} while (1);
}
kfree(pdata);
- return cnt;
+ return (ssize_t)cnt;
}
static struct file_operations libertas_debug_fops = {
@@ -1916,20 +1921,10 @@ void libertas_debug_init(wlan_private * priv, struct net_device *dev)
return;
for (i = 0; i < num_of_items; i++)
- items[i].addr += (u32) priv->adapter;
+ items[i].addr += (size_t) priv->adapter;
priv->debugfs_debug = debugfs_create_file("debug", 0644,
priv->debugfs_dir, &items[0],
&libertas_debug_fops);
}
-/**
- * @brief remove proc file
- *
- * @param priv pointer wlan_private
- * @return N/A
- */
-void libertas_debug_remove(wlan_private * priv)
-{
- debugfs_remove(priv->debugfs_debug);
-}
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index fb1478c..80dd9ea 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -9,6 +9,11 @@
extern unsigned int libertas_debug;
+#ifdef CONFIG_LIBERTAS_DEBUG
+#define DEBUG
+#define PROC_DEBUG
+#endif
+
#define DRV_NAME "usb8xxx"
#define lbs_pr_info(format, args...) \
@@ -223,31 +228,6 @@ enum SNRNF_DATA {
MAX_TYPE_AVG
};
-/** WLAN_802_11_AUTH_ALG*/
-enum WLAN_802_11_AUTH_ALG {
- AUTH_ALG_OPEN_SYSTEM = 1,
- AUTH_ALG_SHARED_KEY = 2,
- AUTH_ALG_NETWORK_EAP = 8,
-};
-
-/** WLAN_802_1X_AUTH_ALG */
-enum WLAN_802_1X_AUTH_ALG {
- WLAN_1X_AUTH_ALG_NONE = 1,
- WLAN_1X_AUTH_ALG_LEAP = 2,
- WLAN_1X_AUTH_ALG_TLS = 4,
- WLAN_1X_AUTH_ALG_TTLS = 8,
- WLAN_1X_AUTH_ALG_MD5 = 16,
-};
-
-/** WLAN_802_11_ENCRYPTION_MODE */
-enum WLAN_802_11_ENCRYPTION_MODE {
- CIPHER_NONE,
- CIPHER_WEP40,
- CIPHER_TKIP,
- CIPHER_CCMP,
- CIPHER_WEP104,
-};
-
/** WLAN_802_11_POWER_MODE */
enum WLAN_802_11_POWER_MODE {
wlan802_11powermodecam,
@@ -292,28 +272,6 @@ enum mv_ms_type {
MVMS_EVENT
};
-/** WLAN_802_11_NETWORK_INFRASTRUCTURE */
-enum WLAN_802_11_NETWORK_INFRASTRUCTURE {
- wlan802_11ibss,
- wlan802_11infrastructure,
- wlan802_11autounknown,
- /*defined as upper bound */
- wlan802_11infrastructuremax
-};
-
-/** WLAN_802_11_AUTHENTICATION_MODE */
-enum WLAN_802_11_AUTHENTICATION_MODE {
- wlan802_11authmodeopen = 0x00,
- wlan802_11authmodeshared = 0x01,
- wlan802_11authmodenetworkEAP = 0x80,
-};
-
-/** WLAN_802_11_WEP_STATUS */
-enum WLAN_802_11_WEP_STATUS {
- wlan802_11WEPenabled,
- wlan802_11WEPdisabled,
-};
-
/** SNMP_MIB_INDEX_e */
enum SNMP_MIB_INDEX_e {
desired_bsstype_i = 0,
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index b1f876f..e8b9020 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -10,6 +10,7 @@
#include <linux/wireless.h>
#include <linux/ethtool.h>
#include <linux/debugfs.h>
+#include <net/ieee80211.h>
#include "defs.h"
#include "scan.h"
@@ -56,10 +57,8 @@ struct region_channel {
struct wlan_802_11_security {
u8 WPAenabled;
u8 WPA2enabled;
- enum WLAN_802_11_WEP_STATUS WEPstatus;
- enum WLAN_802_11_AUTHENTICATION_MODE authmode;
- enum WLAN_802_1X_AUTH_ALG auth1xalg;
- enum WLAN_802_11_ENCRYPTION_MODE Encryptionmode;
+ u8 wep_enabled;
+ u8 auth_mode;
};
/** Current Basic Service Set State Structure */
@@ -184,7 +183,7 @@ struct assoc_request {
struct WLAN_802_11_SSID ssid;
u8 channel;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode;
+ u8 mode;
u8 bssid[ETH_ALEN];
/** WEP keys */
@@ -198,7 +197,6 @@ struct assoc_request {
struct wlan_802_11_security secinfo;
/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
};
@@ -254,7 +252,8 @@ struct _wlan_adapter {
/** current ssid/bssid related parameters*/
struct current_bss_params curbssparams;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+ /* IW_MODE_* */
+ u8 mode;
struct bss_descriptor *pattemptedbssdesc;
@@ -339,7 +338,6 @@ struct _wlan_adapter {
struct WLAN_802_11_KEY wpa_unicast_key;
/** WPA Information Elements*/
-#define MAX_WPA_IE_LEN 64
u8 wpa_ie[MAX_WPA_IE_LEN];
u8 wpa_ie_len;
diff --git a/drivers/net/wireless/libertas/fw.c b/drivers/net/wireless/libertas/fw.c
index b194a45..441123c 100644
--- a/drivers/net/wireless/libertas/fw.c
+++ b/drivers/net/wireless/libertas/fw.c
@@ -194,16 +194,13 @@ static void wlan_init_adapter(wlan_private * priv)
adapter->scanmode = cmd_bss_type_any;
/* 802.11 specific */
- adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ adapter->secinfo.wep_enabled = 0;
for (i = 0; i < sizeof(adapter->wep_keys) / sizeof(adapter->wep_keys[0]);
i++)
memset(&adapter->wep_keys[i], 0, sizeof(struct WLAN_802_11_KEY));
adapter->wep_tx_keyidx = 0;
- adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
- adapter->secinfo.authmode = wlan802_11authmodeopen;
- adapter->secinfo.auth1xalg = WLAN_1X_AUTH_ALG_NONE;
- adapter->secinfo.Encryptionmode = CIPHER_NONE;
- adapter->inframode = wlan802_11infrastructure;
+ adapter->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
+ adapter->mode = IW_MODE_INFRA;
adapter->assoc_req = NULL;
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 695fb6a..ae6f72a 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -388,7 +388,7 @@ static int __if_usb_submit_rx_urb(wlan_private * priv,
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev,
cardp->bulk_in_endpointAddr),
- skb->tail + IPFIELD_ALIGN_OFFSET,
+ (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
rinfo);
@@ -626,6 +626,7 @@ static void if_usb_receive(struct urb *urb)
cardp->usb_event_cause);
if (cardp->usb_event_cause & 0xffff0000) {
libertas_send_tx_feedback(priv);
+ spin_unlock(&priv->adapter->driver_lock);
break;
}
cardp->usb_event_cause = le32_to_cpu(cardp->usb_event_cause) << 3;
@@ -775,7 +776,6 @@ restart:
return -1;
}
-#ifdef SUPPORT_BOOT_COMMAND
cardp->bootcmdresp = 0;
do {
int j = 0;
@@ -796,7 +796,6 @@ restart:
}
return -1;
}
-#endif
i = 0;
priv->adapter->fw_ready = 0;
diff --git a/drivers/net/wireless/libertas/if_usb.h b/drivers/net/wireless/libertas/if_usb.h
index 7851167..170dfe6 100644
--- a/drivers/net/wireless/libertas/if_usb.h
+++ b/drivers/net/wireless/libertas/if_usb.h
@@ -12,7 +12,6 @@
#define USB8388_VID_2 0x05a3
#define USB8388_PID_2 0x8388
-#ifdef SUPPORT_BOOT_COMMAND
#define BOOT_CMD_FW_BY_USB 0x01
#define BOOT_CMD_FW_IN_EEPROM 0x02
#define BOOT_CMD_UPDATE_BOOT2 0x03
@@ -36,7 +35,6 @@ struct bootcmdrespStr
u8 u8result;
u8 au8dumy[2];
};
-#endif /* SUPPORT_BOOT_COMMAND */
/* read callback private data */
struct read_cb_info {
diff --git a/drivers/net/wireless/libertas/ioctl.c b/drivers/net/wireless/libertas/ioctl.c
index 82b3964..a8f76c3 100644
--- a/drivers/net/wireless/libertas/ioctl.c
+++ b/drivers/net/wireless/libertas/ioctl.c
@@ -27,95 +27,6 @@
#define WAIT_FOR_SCAN_RRESULT_MAX_TIME (10 * HZ)
-static int setrxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (mode != RF_ANTENNA_1 && mode != RF_ANTENNA_2
- && mode != RF_ANTENNA_AUTO) {
- return -EINVAL;
- }
-
- adapter->rxantennamode = mode;
-
- lbs_pr_debug(1, "SET RX Antenna mode to 0x%04x\n", adapter->rxantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_rx,
- cmd_option_waitforrsp, 0,
- &adapter->rxantennamode);
- return ret;
-}
-
-static int settxantenna(wlan_private * priv, int mode)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if ((mode != RF_ANTENNA_1) && (mode != RF_ANTENNA_2)
- && (mode != RF_ANTENNA_AUTO)) {
- return -EINVAL;
- }
-
- adapter->txantennamode = mode;
-
- lbs_pr_debug(1, "SET TX Antenna mode to 0x%04x\n", adapter->txantennamode);
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_set_tx,
- cmd_option_waitforrsp, 0,
- &adapter->txantennamode);
-
- return ret;
-}
-
-static int getrxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->rxantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_rx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Rx Antenna mode:0x%04x\n", adapter->rxantennamode);
-
- return sprintf(buf, "0x%04x", adapter->rxantennamode) + 1;
-}
-
-static int gettxantenna(wlan_private * priv, char *buf)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- // clear it, so we will know if the value
- // returned below is correct or not.
- adapter->txantennamode = 0;
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_rf_antenna,
- cmd_act_get_tx,
- cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
-
- lbs_pr_debug(1, "Get Tx Antenna mode:0x%04x\n", adapter->txantennamode);
-
- return sprintf(buf, "0x%04x", adapter->txantennamode) + 1;
-}
-
static int wlan_set_region(wlan_private * priv, u16 region_code)
{
int i;
@@ -144,998 +55,6 @@ static int wlan_set_region(wlan_private * priv, u16 region_code)
return 0;
}
-/**
- * @brief Get/Set Firmware wakeup method
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_txcontrol(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- if (copy_to_user
- (wrq->u.data.pointer, &adapter->pkttxctrl, sizeof(u32))) {
- lbs_pr_alert("copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert("ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_alert("Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->pkttxctrl = (u32) data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Get/Set NULL Package generation interval
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_null_pkt_interval(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data;
- ENTER();
-
- if ((int)wrq->u.data.length == 0) {
- data = adapter->nullpktinterval;
-
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_alert( "copy_to_user failed!\n");
- return -EFAULT;
- }
- } else {
- if ((int)wrq->u.data.length > 1) {
- lbs_pr_alert( "ioctl too many args!\n");
- return -EFAULT;
- }
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->nullpktinterval = data;
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_rxinfo(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data[2];
- ENTER();
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[1] = adapter->rxpd_rate;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- wrq->u.data.length = 2;
- LEAVE();
- return 0;
-}
-
-static int wlan_get_snr(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int data[4];
-
- ENTER();
- memset(data, 0, sizeof(data));
- if (wrq->u.data.length) {
- if (copy_from_user(data, wrq->u.data.pointer,
- min_t(size_t, wrq->u.data.length, 4) * sizeof(int)))
- return -EFAULT;
- }
- if ((wrq->u.data.length == 0) || (data[0] == 0) || (data[0] == 1)) {
- if (adapter->connect_status == libertas_connected) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0,
- cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
- }
-
- if (wrq->u.data.length == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- data[1] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- data[2] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- data[3] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 4))
- return -EFAULT;
- wrq->u.data.length = 4;
- } else if (data[0] == 0) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 1) {
- data[0] = adapter->SNR[TYPE_BEACON][TYPE_AVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 2) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_NOAVG];
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else if (data[0] == 3) {
- data[0] = adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int)))
- return -EFAULT;
- wrq->u.data.length = 1;
- } else
- return -ENOTSUPP;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_beacon_interval(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
-
- if (wrq->u.data.length > 0) {
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int)))
- return -EFAULT;
-
- lbs_pr_debug(1, "WLAN SET BEACON INTERVAL: %d\n", data);
- if ((data > MRVDRV_MAX_BEACON_INTERVAL)
- || (data < MRVDRV_MIN_BEACON_INTERVAL))
- return -ENOTSUPP;
- adapter->beaconperiod = data;
- }
- data = adapter->beaconperiod;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int)))
- return -EFAULT;
-
- wrq->u.data.length = 1;
-
- return 0;
-}
-
-static int wlan_get_rssi(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- ENTER();
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
-
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_NOAVG],
- adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
- break;
- case 1:
- temp = CAL_RSSI(adapter->SNR[TYPE_BEACON][TYPE_AVG],
- adapter->NF[TYPE_BEACON][TYPE_AVG]);
- break;
- case 2:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_NOAVG],
- adapter->NF[TYPE_RXPD][TYPE_NOAVG]);
- break;
- case 3:
- temp = CAL_RSSI(adapter->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
- adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
- break;
- default:
- return -ENOTSUPP;
- }
- val = (int *)wrq->u.name;
- *val = temp;
-
- LEAVE();
- return 0;
-}
-
-static int wlan_get_nf(wlan_private * priv, struct iwreq *wrq)
-{
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
- int temp;
- int data = 0;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- if ((data == 0) || (data == 1)) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rssi,
- 0, cmd_option_waitforrsp,
- 0, NULL);
-
- if (ret) {
- LEAVE();
- return ret;
- }
- }
-
- switch (data) {
- case 0:
- temp = adapter->NF[TYPE_BEACON][TYPE_NOAVG];
- break;
- case 1:
- temp = adapter->NF[TYPE_BEACON][TYPE_AVG];
- break;
- case 2:
- temp = adapter->NF[TYPE_RXPD][TYPE_NOAVG];
- break;
- case 3:
- temp = adapter->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE;
- break;
- default:
- return -ENOTSUPP;
- }
-
- temp = CAL_NF(temp);
-
- lbs_pr_debug(1, "%s: temp = %d\n", __FUNCTION__, temp);
- val = (int *)wrq->u.name;
- *val = temp;
- return 0;
-}
-
-static int wlan_get_txrate_ioctl(wlan_private * priv, struct ifreq *req)
-{
- wlan_adapter *adapter = priv->adapter;
- int *pdata;
- struct iwreq *wrq = (struct iwreq *)req;
- int ret = 0;
- adapter->txrate = 0;
- lbs_pr_debug(1, "wlan_get_txrate_ioctl\n");
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_tx_rate_query,
- cmd_act_get, cmd_option_waitforrsp,
- 0, NULL);
- if (ret)
- return ret;
-
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->txrate;
- return 0;
-}
-
-static int wlan_get_adhoc_status_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- char status[64];
- wlan_adapter *adapter = priv->adapter;
-
- memset(status, 0, sizeof(status));
-
- switch (adapter->inframode) {
- case wlan802_11ibss:
- if (adapter->connect_status == libertas_connected) {
- if (adapter->adhoccreate)
- memcpy(&status, "AdhocStarted", sizeof(status));
- else
- memcpy(&status, "AdhocJoined", sizeof(status));
- } else {
- memcpy(&status, "AdhocIdle", sizeof(status));
- }
- break;
- case wlan802_11infrastructure:
- memcpy(&status, "Inframode", sizeof(status));
- break;
- default:
- memcpy(&status, "AutoUnknownmode", sizeof(status));
- break;
- }
-
- lbs_pr_debug(1, "status = %s\n", status);
- wrq->u.data.length = strlen(status) + 1;
-
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer,
- &status, wrq->u.data.length))
- return -EFAULT;
- }
-
- LEAVE();
- return 0;
-}
-
-/**
- * @brief Set/Get WPA IE
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_setwpaie_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- ENTER();
-
- if (wrq->u.data.length) {
- if (wrq->u.data.length > sizeof(adapter->wpa_ie)) {
- lbs_pr_debug(1, "failed to copy WPA IE, too big \n");
- return -EFAULT;
- }
- if (copy_from_user(adapter->wpa_ie, wrq->u.data.pointer,
- wrq->u.data.length)) {
- lbs_pr_debug(1, "failed to copy WPA IE \n");
- return -EFAULT;
- }
- adapter->wpa_ie_len = wrq->u.data.length;
- lbs_pr_debug(1, "Set wpa_ie_len=%d IE=%#x\n", adapter->wpa_ie_len,
- adapter->wpa_ie[0]);
- lbs_dbg_hex("wpa_ie", adapter->wpa_ie, adapter->wpa_ie_len);
- if (adapter->wpa_ie[0] == WPA_IE)
- adapter->secinfo.WPAenabled = 1;
- else if (adapter->wpa_ie[0] == WPA2_IE)
- adapter->secinfo.WPA2enabled = 1;
- else {
- adapter->secinfo.WPAenabled = 0;
- adapter->secinfo.WPA2enabled = 0;
- }
- } else {
- memset(adapter->wpa_ie, 0, sizeof(adapter->wpa_ie));
- adapter->wpa_ie_len = wrq->u.data.length;
- lbs_pr_debug(1, "Reset wpa_ie_len=%d IE=%#x\n",
- adapter->wpa_ie_len, adapter->wpa_ie[0]);
- adapter->secinfo.WPAenabled = 0;
- adapter->secinfo.WPA2enabled = 0;
- }
-
- // enable/disable RSN in firmware if WPA is enabled/disabled
- // depending on variable adapter->secinfo.WPAenabled is set or not
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_enable_rsn,
- cmd_act_set, cmd_option_waitforrsp,
- 0, NULL);
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set Auto prescan
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_subcmd_setprescan_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int data;
- wlan_adapter *adapter = priv->adapter;
- int *val;
-
- data = SUBCMD_DATA(wrq);
- lbs_pr_debug(1, "WLAN_SUBCMD_SET_PRESCAN %d\n", data);
- adapter->prescan = data;
-
- val = (int *)wrq->u.name;
- *val = data;
- return 0;
-}
-
-static int wlan_set_multiple_dtim_ioctl(wlan_private * priv, struct ifreq *req)
-{
- struct iwreq *wrq = (struct iwreq *)req;
- u32 mdtim;
- int idata;
- int ret = -EINVAL;
-
- ENTER();
-
- idata = SUBCMD_DATA(wrq);
- mdtim = (u32) idata;
- if (((mdtim >= MRVDRV_MIN_MULTIPLE_DTIM)
- && (mdtim <= MRVDRV_MAX_MULTIPLE_DTIM))
- || (mdtim == MRVDRV_IGNORE_MULTIPLE_DTIM)) {
- priv->adapter->multipledtim = mdtim;
- ret = 0;
- }
- if (ret)
- lbs_pr_debug(1, "Invalid parameter, multipledtim not changed.\n");
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set authentication mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_setauthalg_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int alg;
- struct iwreq *wrq = (struct iwreq *)req;
- wlan_adapter *adapter = priv->adapter;
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- alg = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&alg, wrq->u.data.pointer, sizeof(alg))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
-
- lbs_pr_debug(1, "auth alg is %#x\n", alg);
-
- switch (alg) {
- case AUTH_ALG_SHARED_KEY:
- adapter->secinfo.authmode = wlan802_11authmodeshared;
- break;
- case AUTH_ALG_NETWORK_EAP:
- adapter->secinfo.authmode =
- wlan802_11authmodenetworkEAP;
- break;
- case AUTH_ALG_OPEN_SYSTEM:
- default:
- adapter->secinfo.authmode = wlan802_11authmodeopen;
- break;
- }
- return 0;
-}
-
-/**
- * @brief Set 802.1x authentication mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set8021xauthalg_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int alg;
- struct iwreq *wrq = (struct iwreq *)req;
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- alg = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&alg, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
- lbs_pr_debug(1, "802.1x auth alg is %#x\n", alg);
- priv->adapter->secinfo.auth1xalg = alg;
- return 0;
-}
-
-static int wlan_setencryptionmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
- struct iwreq *wrq = (struct iwreq *)req;
-
- ENTER();
-
- if (wrq->u.data.flags == 0) {
- //from iwpriv subcmd
- mode = SUBCMD_DATA(wrq);
- } else {
- //from wpa_supplicant subcmd
- if (copy_from_user(&mode, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- }
- lbs_pr_debug(1, "encryption mode is %#x\n", mode);
- priv->adapter->secinfo.Encryptionmode = mode;
-
- LEAVE();
- return 0;
-}
-
-static void adjust_mtu(wlan_private * priv)
-{
- int mtu_increment = 0;
-
- if (priv->adapter->linkmode == WLAN_LINKMODE_802_11)
- mtu_increment += sizeof(struct ieee80211_hdr_4addr);
-
- if (priv->adapter->radiomode == WLAN_RADIOMODE_RADIOTAP)
- mtu_increment += max(sizeof(struct tx_radiotap_hdr),
- sizeof(struct rx_radiotap_hdr));
- priv->wlan_dev.netdev->mtu = ETH_FRAME_LEN
- - sizeof(struct ethhdr)
- + mtu_increment;
-}
-
-/**
- * @brief Set Link-Layer Layer mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_linkmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_LINKMODE_802_3:
- priv->adapter->linkmode = mode;
- break;
- case WLAN_LINKMODE_802_11:
- priv->adapter->linkmode = mode;
- break;
- default:
- lbs_pr_info("usb8388-5: invalid link-layer mode (%#x)\n",
- mode);
- return -EINVAL;
- break;
- }
- lbs_pr_debug(1, "usb8388-5: link-layer mode is %#x\n", mode);
-
- adjust_mtu(priv);
-
- return 0;
-}
-
-/**
- * @brief Set Radio header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_radiomode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- int mode;
-
- mode = (int)((struct ifreq *)((u8 *) req + 4))->ifr_data;
-
- switch (mode) {
- case WLAN_RADIOMODE_NONE:
- priv->adapter->radiomode = mode;
- break;
- case WLAN_RADIOMODE_RADIOTAP:
- priv->adapter->radiomode = mode;
- break;
- default:
- lbs_pr_debug(1, "usb8388-5: invalid radio header mode (%#x)\n",
- mode);
- return -EINVAL;
- }
- lbs_pr_debug(1, "usb8388-5: radio-header mode is %#x\n", mode);
-
- adjust_mtu(priv);
- return 0;
-}
-
-/**
- * @brief Set Debug header mode
- * @param priv A pointer to wlan_private structure
- * @param req A pointer to ifreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_set_debugmode_ioctl(wlan_private * priv, struct ifreq *req)
-{
- priv->adapter->debugmode = (int)((struct ifreq *)
- ((u8 *) req + 4))->ifr_data;
- return 0;
-}
-
-static int wlan_subcmd_getrxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETRXANTENNA\n");
- len = getrxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_subcmd_gettxantenna_ioctl(wlan_private * priv,
- struct ifreq *req)
-{
- int len;
- char buf[8];
- struct iwreq *wrq = (struct iwreq *)req;
-
- lbs_pr_debug(1, "WLAN_SUBCMD_GETTXANTENNA\n");
- len = gettxantenna(priv, buf);
-
- wrq->u.data.length = len;
- if (wrq->u.data.pointer) {
- if (copy_to_user(wrq->u.data.pointer, &buf, len)) {
- lbs_pr_debug(1, "CopyToUser failed\n");
- return -EFAULT;
- }
- }
- return 0;
-}
-
-/**
- * @brief Get the MAC TSF value from the firmware
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure containing buffer
- * space to store a TSF value retrieved from the firmware
- *
- * @return 0 if successful; IOCTL error code otherwise
- */
-static int wlan_get_tsf_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u64 tsfval;
- int ret;
-
- ret = libertas_prepare_and_send_command(priv,
- cmd_get_tsf,
- 0, cmd_option_waitforrsp, 0, &tsfval);
-
- lbs_pr_debug(1, "IOCTL: Get TSF = 0x%016llx\n", tsfval);
-
- if (ret != 0) {
- lbs_pr_debug(1, "IOCTL: Get TSF; command exec failed\n");
- ret = -EFAULT;
- } else {
- if (copy_to_user(wrq->u.data.pointer,
- &tsfval,
- min_t(size_t, wrq->u.data.length,
- sizeof(tsfval))) != 0) {
-
- lbs_pr_debug(1, "IOCTL: Get TSF; Copy to user failed\n");
- ret = -EFAULT;
- } else {
- ret = 0;
- }
- }
- return ret;
-}
-
-/**
- * @brief Get/Set adapt rate
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_adapt_rateset(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- wlan_adapter *adapter = priv->adapter;
- int data[2];
-
- memset(data, 0, sizeof(data));
- if (!wrq->u.data.length) {
- lbs_pr_debug(1, "Get ADAPT RATE SET\n");
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_get,
- cmd_option_waitforrsp, 0, NULL);
- data[0] = adapter->enablehwauto;
- data[1] = adapter->ratebitmap;
- if (copy_to_user(wrq->u.data.pointer, data, sizeof(int) * 2)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-#define GET_TWO_INT 2
- wrq->u.data.length = GET_TWO_INT;
- } else {
- lbs_pr_debug(1, "Set ADAPT RATE SET\n");
- if (wrq->u.data.length > 2)
- return -EINVAL;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->enablehwauto = data[0];
- adapter->ratebitmap = data[1];
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_rate_adapt_rateset,
- cmd_act_set,
- cmd_option_waitforrsp, 0, NULL);
- }
- return ret;
-}
-
-/**
- * @brief Get/Set inactivity timeout
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to iwreq structure
- * @return 0 --success, otherwise fail
- */
-static int wlan_inactivity_timeout(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- int data = 0;
- u16 timeout = 0;
-
- ENTER();
- if (wrq->u.data.length > 1)
- return -ENOTSUPP;
-
- if (wrq->u.data.length == 0) {
- /* Get */
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_get,
- cmd_option_waitforrsp, 0,
- &timeout);
- data = timeout;
- if (copy_to_user(wrq->u.data.pointer, &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- } else {
- /* Set */
- if (copy_from_user(&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- timeout = data;
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_inactivity_timeout,
- cmd_act_set,
- cmd_option_waitforrsp, 0,
- &timeout);
- }
-
- wrq->u.data.length = 1;
-
- LEAVE();
- return ret;
-}
-
-static int wlan_do_getlog_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- int ret;
- char buf[GETLOG_BUFSIZE - 1];
- wlan_adapter *adapter = priv->adapter;
-
- lbs_pr_debug(1, " GET STATS\n");
-
- ret = libertas_prepare_and_send_command(priv, cmd_802_11_get_log,
- 0, cmd_option_waitforrsp, 0, NULL);
-
- if (ret) {
- return ret;
- }
-
- if (wrq->u.data.pointer) {
- sprintf(buf, "\n mcasttxframe %u failed %u retry %u "
- "multiretry %u framedup %u "
- "rtssuccess %u rtsfailure %u ackfailure %u\n"
- "rxfrag %u mcastrxframe %u fcserror %u "
- "txframe %u wepundecryptable %u ",
- adapter->logmsg.mcasttxframe,
- adapter->logmsg.failed,
- adapter->logmsg.retry,
- adapter->logmsg.multiretry,
- adapter->logmsg.framedup,
- adapter->logmsg.rtssuccess,
- adapter->logmsg.rtsfailure,
- adapter->logmsg.ackfailure,
- adapter->logmsg.rxfrag,
- adapter->logmsg.mcastrxframe,
- adapter->logmsg.fcserror,
- adapter->logmsg.txframe,
- adapter->logmsg.wepundecryptable);
- wrq->u.data.length = strlen(buf) + 1;
- if (copy_to_user(wrq->u.data.pointer, buf, wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
- }
-
- return 0;
-}
-
-static int wlan_scan_type_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- u8 buf[12];
- u8 *option[] = { "active", "passive", "get", };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
- wlan_adapter *adapter = priv->adapter;
-
- if (priv->adapter->enable11d) {
- lbs_pr_debug(1, "11D: Cannot set scantype when 11D enabled\n");
- return -EFAULT;
- }
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length)))
- return -EFAULT;
-
- lbs_pr_debug(1, "Scan type Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
- case 0:
- adapter->scantype = cmd_scan_type_active;
- break;
- case 1:
- adapter->scantype = cmd_scan_type_passive;
- break;
- case 2:
- wrq->u.data.length = strlen(option[adapter->scantype]) + 1;
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scantype],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
-
- break;
- default:
- lbs_pr_debug(1, "Invalid Scan type Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- return ret;
-}
-
-static int wlan_scan_mode_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- u8 buf[12];
- u8 *option[] = { "bss", "ibss", "any", "get" };
- int i, max_options = (sizeof(option) / sizeof(option[0]));
- int ret = 0;
-
- ENTER();
-
- memset(buf, 0, sizeof(buf));
-
- if (copy_from_user(buf, wrq->u.data.pointer, min_t(size_t, sizeof(buf),
- wrq->u.data.length))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Scan mode Option = %s\n", buf);
-
- buf[sizeof(buf) - 1] = '\0';
-
- for (i = 0; i < max_options; i++) {
- if (!strcmp(buf, option[i]))
- break;
- }
-
- switch (i) {
-
- case 0:
- adapter->scanmode = cmd_bss_type_bss;
- break;
- case 1:
- adapter->scanmode = cmd_bss_type_ibss;
- break;
- case 2:
- adapter->scanmode = cmd_bss_type_any;
- break;
- case 3:
-
- wrq->u.data.length = strlen(option[adapter->scanmode - 1]) + 1;
-
- lbs_pr_debug(1, "Get Scan mode Option = %s\n",
- option[adapter->scanmode - 1]);
-
- lbs_pr_debug(1, "Scan mode length %d\n", wrq->u.data.length);
-
- if (copy_to_user(wrq->u.data.pointer,
- option[adapter->scanmode - 1],
- wrq->u.data.length)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- ret = -EFAULT;
- }
- lbs_pr_debug(1, "GET Scan type Option after copy = %s\n",
- (char *)wrq->u.data.pointer);
-
- break;
-
- default:
- lbs_pr_debug(1, "Invalid Scan mode Ioctl Option\n");
- ret = -EINVAL;
- break;
- }
-
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Get/Set Adhoc G Rate
- *
- * @param priv A pointer to wlan_private structure
- * @param wrq A pointer to user data
- * @return 0--success, otherwise fail
- */
-static int wlan_do_set_grate_ioctl(wlan_private * priv, struct iwreq *wrq)
-{
- wlan_adapter *adapter = priv->adapter;
- int data, data1;
- int *val;
-
- ENTER();
-
- data1 = SUBCMD_DATA(wrq);
- switch (data1) {
- case 0:
- adapter->adhoc_grate_enabled = 0;
- break;
- case 1:
- adapter->adhoc_grate_enabled = 1;
- break;
- case 2:
- break;
- default:
- return -EINVAL;
- }
- data = adapter->adhoc_grate_enabled;
- val = (int *)wrq->u.name;
- *val = data;
- LEAVE();
- return 0;
-}
-
static inline int hex2int(char c)
{
if (c >= '0' && c <= '9')
@@ -1761,6 +680,7 @@ static int wlan_fwt_list_neighbor_ioctl(wlan_private * priv, struct ifreq *req)
*/
static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
static struct cmd_ds_fwt_access fwt_access;
int ret;
@@ -1776,7 +696,7 @@ static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
(void *)&fwt_access);
if (ret == 0)
- req->ifr_data = (char *)(le32_to_cpu(fwt_access.references));
+ wrq->u.param.value = le32_to_cpu(fwt_access.references);
else
return -EFAULT;
@@ -1792,6 +712,7 @@ static int wlan_fwt_cleanup_ioctl(wlan_private * priv, struct ifreq *req)
*/
static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
static struct cmd_ds_fwt_access fwt_access;
int ret;
@@ -1807,7 +728,7 @@ static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
(void *)&fwt_access);
if (ret == 0)
- req->ifr_data = (char *)(le32_to_cpu(fwt_access.references));
+ wrq->u.param.value = le32_to_cpu(fwt_access.references);
else
return -EFAULT;
@@ -1823,6 +744,7 @@ static int wlan_fwt_time_ioctl(wlan_private * priv, struct ifreq *req)
*/
static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
{
+ struct iwreq *wrq = (struct iwreq *)req;
struct cmd_ds_mesh_access mesh_access;
int ret;
@@ -1835,9 +757,8 @@ static int wlan_mesh_get_ttl_ioctl(wlan_private * priv, struct ifreq *req)
cmd_option_waitforrsp, 0,
(void *)&mesh_access);
- if (ret == 0) {
- req->ifr_data = (char *)(le32_to_cpu(mesh_access.data[0]));
- }
+ if (ret == 0)
+ wrq->u.param.value = le32_to_cpu(mesh_access.data[0]);
else
return -EFAULT;
@@ -1898,36 +819,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
lbs_pr_debug(1, "libertas_do_ioctl: ioctl cmd = 0x%x\n", cmd);
switch (cmd) {
- case WLANSCAN_TYPE:
- lbs_pr_debug(1, "Scan type Ioctl\n");
- ret = wlan_scan_type_ioctl(priv, wrq);
- break;
-
case WLAN_SETNONE_GETNONE: /* set WPA mode on/off ioctl #20 */
switch (wrq->u.data.flags) {
- case WLANDEAUTH:
- lbs_pr_debug(1, "Deauth\n");
- libertas_send_deauth(priv);
- break;
-
- case WLANADHOCSTOP:
- lbs_pr_debug(1, "Adhoc stop\n");
- ret = libertas_do_adhocstop_ioctl(priv);
- break;
-
- case WLANRADIOON:
- wlan_radio_ioctl(priv, 1);
- break;
-
- case WLANRADIOOFF:
- wlan_radio_ioctl(priv, 0);
- break;
- case WLANWLANIDLEON:
- libertas_idle_on(priv);
- break;
- case WLANWLANIDLEOFF:
- libertas_idle_off(priv);
- break;
case WLAN_SUBCMD_BT_RESET: /* bt_reset */
wlan_bt_reset_ioctl(priv);
break;
@@ -1937,162 +830,19 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
} /* End of switch */
break;
- case WLANSETWPAIE:
- ret = wlan_setwpaie_ioctl(priv, req);
- break;
- case WLAN_SETINT_GETINT:
- /* The first 4 bytes of req->ifr_data is sub-ioctl number
- * after 4 bytes sits the payload.
- */
- subcmd = (int)req->ifr_data; //from iwpriv subcmd
- switch (subcmd) {
- case WLANNF:
- ret = wlan_get_nf(priv, wrq);
- break;
- case WLANRSSI:
- ret = wlan_get_rssi(priv, wrq);
- break;
- case WLANENABLE11D:
- ret = libertas_cmd_enable_11d(priv, wrq);
- break;
- case WLANADHOCGRATE:
- ret = wlan_do_set_grate_ioctl(priv, wrq);
- break;
- case WLAN_SUBCMD_SET_PRESCAN:
- ret = wlan_subcmd_setprescan_ioctl(priv, wrq);
- break;
- }
- break;
-
- case WLAN_SETONEINT_GETONEINT:
- switch (wrq->u.data.flags) {
- case WLAN_BEACON_INTERVAL:
- ret = wlan_beacon_interval(priv, wrq);
- break;
-
- case WLAN_LISTENINTRVL:
- if (!wrq->u.data.length) {
- int data;
- lbs_pr_debug(1, "Get locallisteninterval value\n");
-#define GET_ONE_INT 1
- data = adapter->locallisteninterval;
- if (copy_to_user(wrq->u.data.pointer,
- &data, sizeof(int))) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = GET_ONE_INT;
- } else {
- int data;
- if (copy_from_user
- (&data, wrq->u.data.pointer, sizeof(int))) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
-
- lbs_pr_debug(1, "Set locallisteninterval = %d\n",
- data);
-#define MAX_U16_VAL 65535
- if (data > MAX_U16_VAL) {
- lbs_pr_debug(1, "Exceeds U16 value\n");
- return -EINVAL;
- }
- adapter->locallisteninterval = data;
- }
- break;
- case WLAN_TXCONTROL:
- ret = wlan_txcontrol(priv, wrq); //adds for txcontrol ioctl
- break;
-
- case WLAN_NULLPKTINTERVAL:
- ret = wlan_null_pkt_interval(priv, wrq);
- break;
-
- default:
- ret = -EOPNOTSUPP;
- break;
- }
- break;
-
case WLAN_SETONEINT_GETNONE:
/* The first 4 bytes of req->ifr_data is sub-ioctl number
* after 4 bytes sits the payload.
*/
- subcmd = wrq->u.data.flags; //from wpa_supplicant subcmd
-
+ subcmd = wrq->u.data.flags;
if (!subcmd)
- subcmd = (int)req->ifr_data; //from iwpriv subcmd
+ subcmd = (int)wrq->u.param.value;
switch (subcmd) {
- case WLAN_SUBCMD_SETRXANTENNA: /* SETRXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = setrxantenna(priv, idata);
- break;
- case WLAN_SUBCMD_SETTXANTENNA: /* SETTXANTENNA */
- idata = SUBCMD_DATA(wrq);
- ret = settxantenna(priv, idata);
- break;
- case WLAN_SET_ATIM_WINDOW:
- adapter->atimwindow = SUBCMD_DATA(wrq);
- adapter->atimwindow = min_t(__u16, adapter->atimwindow, 50);
- break;
- case WLANSETBCNAVG:
- adapter->bcn_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->bcn_avg_factor == 0)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- if (adapter->bcn_avg_factor > DEFAULT_BCN_AVG_FACTOR)
- adapter->bcn_avg_factor =
- DEFAULT_BCN_AVG_FACTOR;
- break;
- case WLANSETDATAAVG:
- adapter->data_avg_factor = SUBCMD_DATA(wrq);
- if (adapter->data_avg_factor == 0)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- if (adapter->data_avg_factor > DEFAULT_DATA_AVG_FACTOR)
- adapter->data_avg_factor =
- DEFAULT_DATA_AVG_FACTOR;
- break;
case WLANSETREGION:
idata = SUBCMD_DATA(wrq);
ret = wlan_set_region(priv, (u16) idata);
break;
-
- case WLAN_SET_LISTEN_INTERVAL:
- idata = SUBCMD_DATA(wrq);
- adapter->listeninterval = (u16) idata;
- break;
-
- case WLAN_SET_MULTIPLE_DTIM:
- ret = wlan_set_multiple_dtim_ioctl(priv, req);
- break;
-
- case WLANSETAUTHALG:
- ret = wlan_setauthalg_ioctl(priv, req);
- break;
-
- case WLANSET8021XAUTHALG:
- ret = wlan_set8021xauthalg_ioctl(priv, req);
- break;
-
- case WLANSETENCRYPTIONMODE:
- ret = wlan_setencryptionmode_ioctl(priv, req);
- break;
-
- case WLAN_SET_LINKMODE:
- ret = wlan_set_linkmode_ioctl(priv, req);
- break;
-
- case WLAN_SET_RADIOMODE:
- ret = wlan_set_radiomode_ioctl(priv, req);
- break;
-
- case WLAN_SET_DEBUGMODE:
- ret = wlan_set_debugmode_ioctl(priv, req);
- break;
-
case WLAN_SUBCMD_MESH_SET_TTL:
idata = SUBCMD_DATA(wrq);
ret = wlan_mesh_set_ttl_ioctl(priv, idata);
@@ -2105,38 +855,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
break;
- case WLAN_SETNONE_GETTWELVE_CHAR: /* Get Antenna settings */
- /*
- * We've not used IW_PRIV_TYPE_FIXED so sub-ioctl number is
- * in flags of iwreq structure, otherwise it will be in
- * mode member of iwreq structure.
- */
- switch ((int)wrq->u.data.flags) {
- case WLAN_SUBCMD_GETRXANTENNA: /* Get Rx Antenna */
- ret = wlan_subcmd_getrxantenna_ioctl(priv, req);
- break;
-
- case WLAN_SUBCMD_GETTXANTENNA: /* Get Tx Antenna */
- ret = wlan_subcmd_gettxantenna_ioctl(priv, req);
- break;
-
- case WLAN_GET_TSF:
- ret = wlan_get_tsf_ioctl(priv, wrq);
- break;
- }
- break;
-
case WLAN_SET128CHAR_GET128CHAR:
switch ((int)wrq->u.data.flags) {
-
- case WLANSCAN_MODE:
- lbs_pr_debug(1, "Scan mode Ioctl\n");
- ret = wlan_scan_mode_ioctl(priv, wrq);
- break;
-
- case WLAN_GET_ADHOC_STATUS:
- ret = wlan_get_adhoc_status_ioctl(priv, wrq);
- break;
case WLAN_SUBCMD_BT_ADD:
ret = wlan_bt_add_ioctl(priv, req);
break;
@@ -2168,41 +888,11 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
break;
case WLAN_SETNONE_GETONEINT:
- switch ((int)req->ifr_data) {
- case WLANGETBCNAVG:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->bcn_avg_factor;
- break;
-
+ switch (wrq->u.param.value) {
case WLANGETREGION:
pdata = (int *)wrq->u.name;
*pdata = (int)adapter->regioncode;
break;
-
- case WLAN_GET_LISTEN_INTERVAL:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->listeninterval;
- break;
-
- case WLAN_GET_LINKMODE:
- req->ifr_data = (char *)((u32) adapter->linkmode);
- break;
-
- case WLAN_GET_RADIOMODE:
- req->ifr_data = (char *)((u32) adapter->radiomode);
- break;
-
- case WLAN_GET_DEBUGMODE:
- req->ifr_data = (char *)((u32) adapter->debugmode);
- break;
-
- case WLAN_GET_MULTIPLE_DTIM:
- pdata = (int *)wrq->u.name;
- *pdata = (int)adapter->multipledtim;
- break;
- case WLAN_GET_TX_RATE:
- ret = wlan_get_txrate_ioctl(priv, req);
- break;
case WLAN_SUBCMD_FWT_CLEANUP: /* fwt_cleanup */
ret = wlan_fwt_cleanup_ioctl(priv, req);
break;
@@ -2222,196 +912,8 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
break;
- case WLANGETLOG:
- ret = wlan_do_getlog_ioctl(priv, wrq);
- break;
-
case WLAN_SET_GET_SIXTEEN_INT:
switch ((int)wrq->u.data.flags) {
- case WLAN_TPCCFG:
- {
- int data[5];
- struct cmd_ds_802_11_tpc_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 5))
- return -1;
-
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 5)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.usesnr = data[1];
- cfg.P0 = data[2];
- cfg.P1 = data[3];
- cfg.P2 = data[4];
- }
-
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_tpc_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
-
- data[0] = cfg.enable;
- data[1] = cfg.usesnr;
- data[2] = cfg.P0;
- data[3] = cfg.P1;
- data[4] = cfg.P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 5)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 5;
- }
- break;
-
- case WLAN_POWERCFG:
- {
- int data[4];
- struct cmd_ds_802_11_pwr_cfg cfg;
- memset(&cfg, 0, sizeof(cfg));
- if ((wrq->u.data.length > 1)
- && (wrq->u.data.length != 4))
- return -1;
- if (wrq->u.data.length == 0) {
- cfg.action =
- cpu_to_le16
- (cmd_act_get);
- } else {
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 4)) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- cfg.action =
- cpu_to_le16
- (cmd_act_set);
- cfg.enable = data[0];
- cfg.PA_P0 = data[1];
- cfg.PA_P1 = data[2];
- cfg.PA_P2 = data[3];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_pwr_cfg,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&cfg);
- data[0] = cfg.enable;
- data[1] = cfg.PA_P0;
- data[2] = cfg.PA_P1;
- data[3] = cfg.PA_P2;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 4)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 4;
- }
- break;
- case WLAN_AUTO_FREQ_SET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- if (wrq->u.data.length != 3)
- return -1;
- if (copy_from_user
- (data, wrq->u.data.pointer,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy from user failed\n");
- return -EFAULT;
- }
- afc.afc_auto = data[0];
-
- if (afc.afc_auto != 0) {
- afc.threshold = data[1];
- afc.period = data[2];
- } else {
- afc.timing_offset = data[1];
- afc.carrier_offset = data[2];
- }
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_set_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- }
- break;
- case WLAN_AUTO_FREQ_GET:
- {
- int data[3];
- struct cmd_ds_802_11_afc afc;
- memset(&afc, 0, sizeof(afc));
- ret =
- libertas_prepare_and_send_command(priv,
- cmd_802_11_get_afc,
- 0,
- cmd_option_waitforrsp,
- 0, (void *)&afc);
- data[0] = afc.afc_auto;
- data[1] = afc.timing_offset;
- data[2] = afc.carrier_offset;
- if (copy_to_user
- (wrq->u.data.pointer, data,
- sizeof(int) * 3)) {
- lbs_pr_debug(1, "Copy to user failed\n");
- return -EFAULT;
- }
-
- wrq->u.data.length = 3;
- }
- break;
- case WLAN_SCANPROBES:
- {
- int data;
- if (wrq->u.data.length > 0) {
- if (copy_from_user
- (&data, wrq->u.data.pointer,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy from user failed\n");
- return -EFAULT;
- }
-
- adapter->scanprobes = data;
- } else {
- data = adapter->scanprobes;
- if (copy_to_user
- (wrq->u.data.pointer, &data,
- sizeof(int))) {
- lbs_pr_debug(1,
- "Copy to user failed\n");
- return -EFAULT;
- }
- }
- wrq->u.data.length = 1;
- }
- break;
case WLAN_LED_GPIO_CTRL:
{
int i;
@@ -2475,17 +977,6 @@ int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
wrq->u.data.length = gpio->header.len;
}
break;
- case WLAN_ADAPT_RATESET:
- ret = wlan_adapt_rateset(priv, wrq);
- break;
- case WLAN_INACTIVITY_TIMEOUT:
- ret = wlan_inactivity_timeout(priv, wrq);
- break;
- case WLANSNR:
- ret = wlan_get_snr(priv, wrq);
- break;
- case WLAN_GET_RXINFO:
- ret = wlan_get_rxinfo(priv, wrq);
}
break;
diff --git a/drivers/net/wireless/libertas/join.c b/drivers/net/wireless/libertas/join.c
index 11682cb..d4926b8 100644
--- a/drivers/net/wireless/libertas/join.c
+++ b/drivers/net/wireless/libertas/join.c
@@ -15,6 +15,8 @@
#include "join.h"
#include "dev.h"
+#define AD_HOC_CAP_PRIVACY_ON 1
+
/**
* @brief This function finds out the common rates between rate1 and rate2.
*
@@ -85,7 +87,7 @@ int libertas_send_deauth(wlan_private * priv)
wlan_adapter *adapter = priv->adapter;
int ret = 0;
- if (adapter->inframode == wlan802_11infrastructure &&
+ if (adapter->mode == IW_MODE_INFRA &&
adapter->connect_status == libertas_connected)
ret = libertas_send_deauthentication(priv);
else
@@ -94,20 +96,6 @@ int libertas_send_deauth(wlan_private * priv)
return ret;
}
-int libertas_do_adhocstop_ioctl(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->inframode == wlan802_11ibss &&
- adapter->connect_status == libertas_connected)
- ret = libertas_stop_adhoc_network(priv);
- else
- ret = -ENOTSUPP;
-
- return ret;
-}
-
/**
* @brief Associate to a specific BSS discovered in a scan
*
@@ -207,8 +195,7 @@ int libertas_join_adhoc_network(wlan_private * priv, struct bss_descriptor * pbs
/* check if the requested SSID is already joined */
if (adapter->curbssparams.ssid.ssidlength
&& !libertas_SSID_cmp(&pbssdesc->ssid, &adapter->curbssparams.ssid)
- && (adapter->curbssparams.bssdescriptor.inframode ==
- wlan802_11ibss)) {
+ && (adapter->mode == IW_MODE_ADHOC)) {
lbs_pr_debug(1,
"ADHOC_J_CMD: New ad-hoc SSID is the same as current, "
@@ -261,130 +248,6 @@ int libertas_send_deauthentication(wlan_private * priv)
}
/**
- * @brief Set Idle Off
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_off(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
- const u8 zeromac[] = { 0, 0, 0, 0, 0, 0 };
- int i;
-
- ENTER();
-
- if (adapter->connect_status == libertas_disconnected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- if (memcmp(adapter->previousbssid, zeromac,
- sizeof(zeromac)) != 0) {
-
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- lbs_pr_debug(1, "Previous BSSID = "
- "%02x:%02x:%02x:%02x:%02x:%02x:\n",
- adapter->previousbssid[0],
- adapter->previousbssid[1],
- adapter->previousbssid[2],
- adapter->previousbssid[3],
- adapter->previousbssid[4],
- adapter->previousbssid[5]);
-
- i = libertas_find_SSID_in_list(adapter,
- &adapter->previousssid,
- adapter->previousbssid,
- adapter->inframode);
-
- if (i < 0) {
- libertas_send_specific_BSSID_scan(priv,
- adapter->
- previousbssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid,
- adapter->
- previousbssid,
- adapter->
- inframode);
- }
-
- if (i < 0) {
- /* If the BSSID could not be found, try just the SSID */
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->
- inframode);
- }
-
- if (i < 0) {
- libertas_send_specific_SSID_scan(priv,
- &adapter->
- previousssid,
- 1);
- i = libertas_find_SSID_in_list(adapter,
- &adapter->
- previousssid, NULL,
- adapter->
- inframode);
- }
-
- if (i >= 0) {
- ret =
- wlan_associate(priv,
- &adapter->
- scantable[i]);
- }
- }
- } else if (adapter->inframode == wlan802_11ibss) {
- ret = libertas_prepare_and_send_command(priv,
- cmd_802_11_ad_hoc_start,
- 0,
- cmd_option_waitforrsp,
- 0, &adapter->previousssid);
- }
- }
- /* else it is connected */
-
- lbs_pr_debug(1, "\nwlanidle is off");
- LEAVE();
- return ret;
-}
-
-/**
- * @brief Set Idle On
- *
- * @param priv A pointer to wlan_private structure
- * @return 0 --success, otherwise fail
- */
-int libertas_idle_on(wlan_private * priv)
-{
- wlan_adapter *adapter = priv->adapter;
- int ret = 0;
-
- if (adapter->connect_status == libertas_connected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- lbs_pr_debug(1, "Previous SSID = %s\n",
- adapter->previousssid.ssid);
- memmove(&adapter->previousssid,
- &adapter->curbssparams.ssid,
- sizeof(struct WLAN_802_11_SSID));
- libertas_send_deauth(priv);
-
- } else if (adapter->inframode == wlan802_11ibss) {
- ret = libertas_stop_adhoc_network(priv);
- }
-
- }
-
- lbs_pr_debug(1, "\nwlanidle is on");
-
- return ret;
-}
-
-/**
* @brief This function prepares command of authenticate.
*
* @param priv A pointer to wlan_private structure
@@ -398,22 +261,39 @@ int libertas_cmd_80211_authenticate(wlan_private * priv,
void *pdata_buf)
{
wlan_adapter *adapter = priv->adapter;
- struct cmd_ds_802_11_authenticate *pauthenticate =
- &cmd->params.auth;
+ struct cmd_ds_802_11_authenticate *pauthenticate = &cmd->params.auth;
+ int ret = -1;
u8 *bssid = pdata_buf;
cmd->command = cpu_to_le16(cmd_802_11_authenticate);
- cmd->size =
- cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
- + S_DS_GEN);
+ cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_authenticate)
+ + S_DS_GEN);
+
+ /* translate auth mode to 802.11 defined wire value */
+ switch (adapter->secinfo.auth_mode) {
+ case IW_AUTH_ALG_OPEN_SYSTEM:
+ pauthenticate->authtype = 0x00;
+ break;
+ case IW_AUTH_ALG_SHARED_KEY:
+ pauthenticate->authtype = 0x01;
+ break;
+ case IW_AUTH_ALG_LEAP:
+ pauthenticate->authtype = 0x80;
+ break;
+ default:
+ lbs_pr_debug(1, "AUTH_CMD: invalid auth alg 0x%X\n",
+ adapter->secinfo.auth_mode);
+ goto out;
+ }
- pauthenticate->authtype = adapter->secinfo.authmode;
memcpy(pauthenticate->macaddr, bssid, ETH_ALEN);
lbs_pr_debug(1, "AUTH_CMD: Bssid is : %x:%x:%x:%x:%x:%x\n",
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
+ ret = 0;
- return 0;
+out:
+ return ret;
}
int libertas_cmd_80211_deauthenticate(wlan_private * priv,
@@ -550,7 +430,7 @@ int libertas_cmd_80211_associate(wlan_private * priv,
lbs_pr_debug(1, "ASSOC_CMD: rates->header.len = %d\n", rates->header.len);
/* set IBSS field */
- if (pbssdesc->inframode == wlan802_11infrastructure) {
+ if (pbssdesc->mode == IW_MODE_INFRA) {
#define CAPINFO_ESS_MODE 1
passo->capinfo.ess = CAPINFO_ESS_MODE;
}
@@ -624,7 +504,7 @@ int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
/* set the BSS type */
adhs->bsstype = cmd_bss_type_ibss;
- pbssdesc->inframode = wlan802_11ibss;
+ pbssdesc->mode = IW_MODE_ADHOC;
adhs->beaconperiod = adapter->beaconperiod;
/* set Physical param set */
@@ -666,15 +546,12 @@ int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
adhs->probedelay = cpu_to_le16(cmd_scan_probe_delay_time);
/* set up privacy in adapter->scantable[i] */
- if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
-
-#define AD_HOC_CAP_PRIVACY_ON 1
- lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus set, privacy to WEP\n");
+ if (adapter->secinfo.wep_enabled) {
+ lbs_pr_debug(1, "ADHOC_S_CMD: WEP enabled, setting privacy on\n");
pbssdesc->privacy = wlan802_11privfilter8021xWEP;
adhs->cap.privacy = AD_HOC_CAP_PRIVACY_ON;
} else {
- lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus NOT set, Setting "
- "privacy to ACCEPT ALL\n");
+ lbs_pr_debug(1, "ADHOC_S_CMD: WEP disabled, setting privacy off\n");
pbssdesc->privacy = wlan802_11privfilteracceptall;
}
@@ -786,9 +663,6 @@ int libertas_cmd_80211_ad_hoc_join(wlan_private * priv,
padhocjoin->bssdescriptor.BSSID[5],
padhocjoin->bssdescriptor.SSID);
- lbs_pr_debug(1, "ADHOC_J_CMD: Data Rate = %x\n",
- (u32) padhocjoin->bssdescriptor.datarates);
-
/* failtimeout */
padhocjoin->failtimeout = cpu_to_le16(MRVDRV_ASSOCIATION_TIME_OUT);
@@ -832,7 +706,7 @@ int libertas_cmd_80211_ad_hoc_join(wlan_private * priv,
padhocjoin->bssdescriptor.ssparamset.ibssparamset.atimwindow =
cpu_to_le16(pbssdesc->atimwindow);
- if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
+ if (adapter->secinfo.wep_enabled) {
padhocjoin->bssdescriptor.cap.privacy = AD_HOC_CAP_PRIVACY_ON;
}
diff --git a/drivers/net/wireless/libertas/join.h b/drivers/net/wireless/libertas/join.h
index 8efa245..115f5a8 100644
--- a/drivers/net/wireless/libertas/join.h
+++ b/drivers/net/wireless/libertas/join.h
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Interface for the wlan infrastructure and adhoc join routines
*
@@ -40,10 +37,6 @@ extern int libertas_ret_80211_disassociate(wlan_private * priv,
extern int libertas_ret_80211_associate(wlan_private * priv,
struct cmd_ds_command *resp);
-extern int libertas_idle_on(wlan_private * priv);
-extern int libertas_idle_off(wlan_private * priv);
-
-extern int libertas_do_adhocstop_ioctl(wlan_private * priv);
extern int libertas_reassociation_thread(void *data);
struct WLAN_802_11_SSID;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index dcbf102..b9b25ce 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -21,6 +21,13 @@
#include "debugfs.h"
#include "assoc.h"
+#define DRIVER_RELEASE_VERSION "320.p0"
+const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
+#ifdef DEBUG
+ "-dbg"
+#endif
+ "";
+
#ifdef ENABLE_PM
static struct pm_dev *wlan_pm_dev = NULL;
#endif
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 7e3f78f..d17924f 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -210,7 +210,7 @@ int libertas_process_rxed_packet(wlan_private * priv, struct sk_buff *skb)
goto done;
}
- lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+ lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
lbs_dbg_hex("RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
@@ -364,7 +364,7 @@ static int process_rxed_802_11_packet(wlan_private * priv, struct sk_buff *skb)
priv->stats.rx_errors++;
}
- lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %d = %d\n",
+ lbs_pr_debug(1, "RX Data: skb->len - sizeof(RxPd) = %d - %zd = %zd\n",
skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
/* create the exported radio header */
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index e187062..3c0b1a2 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Functions implementing wlan scan IOCTL and firmware command APIs
*
@@ -87,118 +84,95 @@
*
* @return Index in scantable, or error code if negative
*/
-static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
+static int is_network_compatible(wlan_adapter * adapter, int index, u8 mode)
{
ENTER();
- if (adapter->scantable[index].inframode == mode) {
- if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ if (adapter->scantable[index].mode == mode) {
+ if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && adapter->scantable[index].wpa_supplicant.wpa_ie[0] !=
- WPA_IE
- && adapter->scantable[index].wpa2_supplicant.wpa_ie[0] !=
- WPA2_IE && adapter->secinfo.Encryptionmode == CIPHER_NONE
+ && adapter->scantable[index].wpa_ie[0] != WPA_IE
+ && adapter->scantable[index].rsn_ie[0] != WPA2_IE
&& !adapter->scantable[index].privacy) {
/* no security */
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled
+ } else if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& adapter->scantable[index].privacy) {
/* static WEP enabled */
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa_supplicant.
- wpa_ie[0]
- == WPA_IE)
+ && (adapter->scantable[index].wpa_ie[0] == WPA_IE)
/* privacy bit may NOT be set in some APs like LinkSys WRT54G
&& adapter->scantable[index].privacy */
) {
/* WPA enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() WPA: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x "
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
"privacy=%#x\n", index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0]
- == WPA2_IE)
+ && (adapter->scantable[index].rsn_ie[0] == WPA2_IE)
/* privacy bit may NOT be set in some APs like LinkSys WRT54G
&& adapter->scantable[index].privacy */
) {
/* WPA2 enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() WPA2: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x "
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s "
"privacy=%#x\n", index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
- } else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
+ } else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
- && (adapter->scantable[index].wpa_supplicant.
- wpa_ie[0]
- != WPA_IE)
- && (adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0]
- != WPA2_IE)
- && adapter->secinfo.Encryptionmode != CIPHER_NONE
+ && (adapter->scantable[index].wpa_ie[0] != WPA_IE)
+ && (adapter->scantable[index].rsn_ie[0] != WPA2_IE)
&& adapter->scantable[index].privacy) {
/* dynamic WEP enabled */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() dynamic WEP: index=%d "
- "wpa_ie=%#x wpa2_ie=%#x Encmode=%#x privacy=%#x\n",
+ "wpa_ie=%#x wpa2_ie=%#x privacy=%#x\n",
index,
- adapter->scantable[index].wpa_supplicant.
- wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.
- wpa_ie[0], adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
adapter->scantable[index].privacy);
LEAVE();
return index;
}
/* security doesn't match */
- lbs_pr_debug(1,
+ lbs_pr_debug(1,
"is_network_compatible() FAILED: index=%d wpa_ie=%#x "
- "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s Encmode=%#x privacy=%#x\n",
+ "wpa2_ie=%#x WEP=%s WPA=%s WPA2=%s privacy=%#x\n",
index,
- adapter->scantable[index].wpa_supplicant.wpa_ie[0],
- adapter->scantable[index].wpa2_supplicant.wpa_ie[0],
- (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) ? "e" : "d",
- (adapter->secinfo.WPAenabled) ? "e" : "d",
- (adapter->secinfo.WPA2enabled) ? "e" : "d",
- adapter->secinfo.Encryptionmode,
+ adapter->scantable[index].wpa_ie[0],
+ adapter->scantable[index].rsn_ie[0],
+ adapter->secinfo.wep_enabled ? "e" : "d",
+ adapter->secinfo.WPAenabled ? "e" : "d",
+ adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return -ECONNREFUSED;
@@ -924,8 +898,6 @@ static int InterpretBSSDescriptionWithIE(struct bss_descriptor * pBSSEntry,
u8 founddatarateie;
int bytesleftforcurrentbeacon;
- struct WPA_SUPPLICANT *pwpa_supplicant;
- struct WPA_SUPPLICANT *pwpa2_supplicant;
struct IE_WPA *pIe;
const u8 oui01[4] = { 0x00, 0x50, 0xf2, 0x01 };
@@ -962,9 +934,6 @@ static int InterpretBSSDescriptionWithIE(struct bss_descriptor * pBSSEntry,
bytesleftforcurrentbeacon = beaconsize;
- pwpa_supplicant = &pBSSEntry->wpa_supplicant;
- pwpa2_supplicant = &pBSSEntry->wpa2_supplicant;
-
memcpy(pBSSEntry->macaddress, pcurrentptr, ETH_ALEN);
lbs_pr_debug(1, "InterpretIE: AP MAC Addr-%x:%x:%x:%x:%x:%x\n",
pBSSEntry->macaddress[0], pBSSEntry->macaddress[1],
@@ -1027,9 +996,9 @@ static int InterpretBSSDescriptionWithIE(struct bss_descriptor * pBSSEntry,
}
if (pcap->ibss == 1) {
- pBSSEntry->inframode = wlan802_11ibss;
+ pBSSEntry->mode = IW_MODE_ADHOC;
} else {
- pBSSEntry->inframode = wlan802_11infrastructure;
+ pBSSEntry->mode = IW_MODE_INFRA;
}
/* process variable IE */
@@ -1116,7 +1085,7 @@ static int InterpretBSSDescriptionWithIE(struct bss_descriptor * pBSSEntry,
sizeof(pcountryinfo->countrycode)
|| pcountryinfo->len > 254) {
lbs_pr_debug(1, "InterpretIE: 11D- Err "
- "CountryInfo len =%d min=%d max=254\n",
+ "CountryInfo len =%d min=%zd max=254\n",
pcountryinfo->len,
sizeof(pcountryinfo->countrycode));
LEAVE();
@@ -1160,27 +1129,27 @@ static int InterpretBSSDescriptionWithIE(struct bss_descriptor * pBSSEntry,
#define IE_ID_LEN_FIELDS_BYTES 2
pIe = (struct IE_WPA *)pcurrentptr;
- if (!memcmp(pIe->oui, oui01, sizeof(oui01))) {
- pwpa_supplicant->wpa_ie_len
- = min_t(size_t, elemlen + IE_ID_LEN_FIELDS_BYTES,
- sizeof(pwpa_supplicant->wpa_ie));
- memcpy(pwpa_supplicant->wpa_ie,
- pcurrentptr,
- pwpa_supplicant->wpa_ie_len);
- lbs_dbg_hex("InterpretIE: Resp WPA_IE",
- pwpa_supplicant->wpa_ie, elemlen);
- }
+ if (memcmp(pIe->oui, oui01, sizeof(oui01)))
+ break;
+
+ pBSSEntry->wpa_ie_len = min_t(size_t,
+ elemlen + IE_ID_LEN_FIELDS_BYTES,
+ sizeof(pBSSEntry->wpa_ie));
+ memcpy(pBSSEntry->wpa_ie, pcurrentptr,
+ pBSSEntry->wpa_ie_len);
+ lbs_dbg_hex("InterpretIE: Resp WPA_IE",
+ pBSSEntry->wpa_ie, elemlen);
break;
case WPA2_IE:
pIe = (struct IE_WPA *)pcurrentptr;
- pwpa2_supplicant->wpa_ie_len
- = min_t(size_t, elemlen + IE_ID_LEN_FIELDS_BYTES,
- sizeof(pwpa2_supplicant->wpa_ie));
- memcpy(pwpa2_supplicant->wpa_ie,
- pcurrentptr, pwpa2_supplicant->wpa_ie_len);
+ pBSSEntry->rsn_ie_len = min_t(size_t,
+ elemlen + IE_ID_LEN_FIELDS_BYTES,
+ sizeof(pBSSEntry->rsn_ie));
+ memcpy(pBSSEntry->rsn_ie, pcurrentptr,
+ pBSSEntry->rsn_ie_len);
lbs_dbg_hex("InterpretIE: Resp WPA2_IE",
- pwpa2_supplicant->wpa_ie, elemlen);
+ pBSSEntry->rsn_ie, elemlen);
break;
case TIM:
break;
@@ -1227,7 +1196,7 @@ int libertas_SSID_cmp(struct WLAN_802_11_SSID *ssid1, struct WLAN_802_11_SSID *s
*
* @return index in BSSID list, or error return code (< 0)
*/
-int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode)
+int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode)
{
int ret = -ENETUNREACH;
int i;
@@ -1247,8 +1216,8 @@ int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode)
for (i = 0; ret < 0 && i < adapter->numinscantable; i++) {
if (!memcmp(adapter->scantable[i].macaddress, bssid, ETH_ALEN)) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
ret = is_network_compatible(adapter, i, mode);
break;
default:
@@ -1272,7 +1241,7 @@ int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode)
* @return index in BSSID list
*/
int libertas_find_SSID_in_list(wlan_adapter * adapter,
- struct WLAN_802_11_SSID *ssid, u8 * bssid, int mode)
+ struct WLAN_802_11_SSID *ssid, u8 * bssid, u8 mode)
{
int net = -ENETUNREACH;
u8 bestrssi = 0;
@@ -1287,8 +1256,8 @@ int libertas_find_SSID_in_list(wlan_adapter * adapter,
!memcmp(adapter->scantable[i].
macaddress, bssid, ETH_ALEN))) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
j = is_network_compatible(adapter, i, mode);
if (j >= 0) {
@@ -1311,7 +1280,7 @@ int libertas_find_SSID_in_list(wlan_adapter * adapter,
}
}
break;
- case wlan802_11autounknown:
+ case IW_MODE_AUTO:
default:
if (SCAN_RSSI(adapter->scantable[i].rssi)
> bestrssi) {
@@ -1338,8 +1307,7 @@ int libertas_find_SSID_in_list(wlan_adapter * adapter,
*
* @return index in BSSID list
*/
-int libertas_find_best_SSID_in_list(wlan_adapter * adapter,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode)
+int libertas_find_best_SSID_in_list(wlan_adapter * adapter, u8 mode)
{
int bestnet = -ENETUNREACH;
u8 bestrssi = 0;
@@ -1351,8 +1319,8 @@ int libertas_find_best_SSID_in_list(wlan_adapter * adapter,
for (i = 0; i < adapter->numinscantable; i++) {
switch (mode) {
- case wlan802_11infrastructure:
- case wlan802_11ibss:
+ case IW_MODE_INFRA:
+ case IW_MODE_ADHOC:
if (is_network_compatible(adapter, i, mode) >= 0) {
if (SCAN_RSSI(adapter->scantable[i].rssi) >
bestrssi) {
@@ -1363,7 +1331,7 @@ int libertas_find_best_SSID_in_list(wlan_adapter * adapter,
}
}
break;
- case wlan802_11autounknown:
+ case IW_MODE_AUTO:
default:
if (SCAN_RSSI(adapter->scantable[i].rssi) > bestrssi) {
bestrssi =
@@ -1388,8 +1356,7 @@ int libertas_find_best_SSID_in_list(wlan_adapter * adapter,
*/
int libertas_find_best_network_SSID(wlan_private * priv,
struct WLAN_802_11_SSID *pSSID,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE preferred_mode,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE *out_mode)
+ u8 preferred_mode, u8 *out_mode)
{
wlan_adapter *adapter = priv->adapter;
int ret = 0;
@@ -1414,7 +1381,7 @@ int libertas_find_best_network_SSID(wlan_private * priv,
preqbssid = &adapter->scantable[i];
memcpy(pSSID, &preqbssid->ssid,
sizeof(struct WLAN_802_11_SSID));
- *out_mode = preqbssid->inframode;
+ *out_mode = preqbssid->mode;
if (!pSSID->ssidlength) {
ret = -1;
@@ -1584,7 +1551,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
for (i = 0; i < adapter->numinscantable; i++) {
if ((current_ev + MAX_SCAN_CELL_SIZE) >= end_buf) {
lbs_pr_debug(1, "i=%d break out: current_ev=%p end_buf=%p "
- "MAX_SCAN_CELL_SIZE=%d\n",
+ "MAX_SCAN_CELL_SIZE=%zd\n",
i, current_ev, end_buf, MAX_SCAN_CELL_SIZE);
break;
}
@@ -1632,7 +1599,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
//Add mode
iwe.cmd = SIOCGIWMODE;
- iwe.u.mode = adapter->scantable[i].inframode + 1;
+ iwe.u.mode = adapter->scantable[i].mode;
iwe.len = IW_EV_UINT_LEN;
current_ev =
iwe_stream_add_event(current_ev, end_buf, &iwe, iwe.len);
@@ -1666,7 +1633,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
iwe.u.qual.noise =
CAL_NF(adapter->NF[TYPE_BEACON][TYPE_NOAVG]);
}
- if ((adapter->inframode == wlan802_11ibss) &&
+ if ((adapter->mode == IW_MODE_ADHOC) &&
!libertas_SSID_cmp(&adapter->curbssparams.ssid,
&adapter->scantable[i].ssid)
&& adapter->adhoccreate) {
@@ -1731,7 +1698,7 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
end_buf, &iwe, iwe.len);
}
- if ((adapter->scantable[i].inframode == wlan802_11ibss)
+ if ((adapter->scantable[i].mode == IW_MODE_ADHOC)
&& !libertas_SSID_cmp(&adapter->curbssparams.ssid,
&adapter->scantable[i].ssid)
&& adapter->adhoccreate) {
@@ -1745,30 +1712,24 @@ int libertas_get_scan(struct net_device *dev, struct iw_request_info *info,
/* Add new value to event */
current_val = current_ev + IW_EV_LCP_LEN;
- if (adapter->scantable[i].wpa2_supplicant.wpa_ie[0] == WPA2_IE) {
+ if (adapter->scantable[i].rsn_ie[0] == WPA2_IE) {
memset(&iwe, 0, sizeof(iwe));
memset(buf, 0, sizeof(buf));
- memcpy(buf, adapter->scantable[i].
- wpa2_supplicant.wpa_ie,
- adapter->scantable[i].wpa2_supplicant.
- wpa_ie_len);
+ memcpy(buf, adapter->scantable[i].rsn_ie,
+ adapter->scantable[i].rsn_ie_len);
iwe.cmd = IWEVGENIE;
- iwe.u.data.length = adapter->scantable[i].
- wpa2_supplicant.wpa_ie_len;
+ iwe.u.data.length = adapter->scantable[i].rsn_ie_len;
iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, buf);
}
- if (adapter->scantable[i].wpa_supplicant.wpa_ie[0] == WPA_IE) {
+ if (adapter->scantable[i].wpa_ie[0] == WPA_IE) {
memset(&iwe, 0, sizeof(iwe));
memset(buf, 0, sizeof(buf));
- memcpy(buf, adapter->scantable[i].
- wpa_supplicant.wpa_ie,
- adapter->scantable[i].wpa_supplicant.
- wpa_ie_len);
+ memcpy(buf, adapter->scantable[i].wpa_ie,
+ adapter->scantable[i].wpa_ie_len);
iwe.cmd = IWEVGENIE;
- iwe.u.data.length = adapter->scantable[i].
- wpa_supplicant.wpa_ie_len;
+ iwe.u.data.length = adapter->scantable[i].wpa_ie_len;
iwe.len = IW_EV_POINT_LEN + iwe.u.data.length;
current_ev = iwe_stream_add_point(current_ev, end_buf,
&iwe, buf);
diff --git a/drivers/net/wireless/libertas/scan.h b/drivers/net/wireless/libertas/scan.h
index d93aa7f..405f4f0 100644
--- a/drivers/net/wireless/libertas/scan.h
+++ b/drivers/net/wireless/libertas/scan.h
@@ -1,6 +1,3 @@
-/* -*- mode: C; tab-width: 4; indent-tabs-mode: nil -*- */
-/* vi: set expandtab shiftwidth=4 tabstop=4 textwidth=78: */
-
/**
* Interface for the wlan network scan routines
*
@@ -10,6 +7,7 @@
#ifndef _WLAN_SCAN_H
#define _WLAN_SCAN_H
+#include <net/ieee80211.h>
#include "hostcmd.h"
/**
@@ -155,7 +153,7 @@ struct bss_descriptor {
u32 atimwindow;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE inframode;
+ u8 mode;
u8 libertas_supported_rates[WLAN_SUPPORTED_RATES];
int extra_ie;
@@ -170,22 +168,22 @@ struct bss_descriptor {
struct ieeetypes_countryinfofullset countryinfo;
- struct WPA_SUPPLICANT wpa_supplicant;
- struct WPA_SUPPLICANT wpa2_supplicant;
-
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
};
extern int libertas_SSID_cmp(struct WLAN_802_11_SSID *ssid1,
struct WLAN_802_11_SSID *ssid2);
extern int libertas_find_SSID_in_list(wlan_adapter * adapter, struct WLAN_802_11_SSID *ssid,
- u8 * bssid, int mode);
-int libertas_find_best_SSID_in_list(wlan_adapter * adapter, enum WLAN_802_11_NETWORK_INFRASTRUCTURE mode);
-extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, int mode);
+ u8 * bssid, u8 mode);
+int libertas_find_best_SSID_in_list(wlan_adapter * adapter, u8 mode);
+extern int libertas_find_BSSID_in_list(wlan_adapter * adapter, u8 * bssid, u8 mode);
int libertas_find_best_network_SSID(wlan_private * priv,
struct WLAN_802_11_SSID *pSSID,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE preferred_mode,
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE *out_mode);
+ u8 preferred_mode, u8 *out_mode);
extern int libertas_send_specific_SSID_scan(wlan_private * priv,
struct WLAN_802_11_SSID *prequestedssid,
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 82d0622..d4b1347 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -78,7 +78,7 @@ static int SendSinglePacket(wlan_private * priv, struct sk_buff *skb)
min_t(unsigned int, skb->len, 100));
if (!skb->len || (skb->len > MRVDRV_ETH_TX_PACKET_BUFFER_SIZE)) {
- lbs_pr_debug(1, "Tx error: Bad skb length %d : %d\n",
+ lbs_pr_debug(1, "Tx error: Bad skb length %d : %zd\n",
skb->len, MRVDRV_ETH_TX_PACKET_BUFFER_SIZE);
ret = -1;
goto done;
diff --git a/drivers/net/wireless/libertas/version.h b/drivers/net/wireless/libertas/version.h
index e86f65a..8b13789 100644
--- a/drivers/net/wireless/libertas/version.h
+++ b/drivers/net/wireless/libertas/version.h
@@ -1,8 +1 @@
-#define DRIVER_RELEASE_VERSION "320.p0"
-const char libertas_driver_version[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
-#ifdef DEBUG
- "-dbg"
-#endif
- "";
-
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index 4a52336..69f52b6 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -17,7 +17,6 @@
#include "defs.h"
#include "dev.h"
#include "join.h"
-#include "version.h"
#include "wext.h"
#include "assoc.h"
@@ -233,7 +232,7 @@ static int changeadhocchannel(wlan_private * priv, int channel)
// find out the BSSID that matches the current SSID
i = libertas_find_SSID_in_list(adapter, &curadhocssid, NULL,
- wlan802_11ibss);
+ IW_MODE_ADHOC);
if (i >= 0) {
lbs_pr_debug(1, "SSID found at %d in List,"
@@ -316,13 +315,11 @@ static int get_active_data_rates(wlan_adapter * adapter,
ENTER();
if (adapter->connect_status != libertas_connected) {
- if (adapter->inframode == wlan802_11infrastructure) {
- //Infra. mode
+ if (adapter->mode == IW_MODE_INFRA) {
lbs_pr_debug(1, "Infra\n");
k = copyrates(rates, k, libertas_supported_rates,
sizeof(libertas_supported_rates));
} else {
- //ad-hoc mode
lbs_pr_debug(1, "Adhoc G\n");
k = copyrates(rates, k, libertas_adhoc_rates_g,
sizeof(libertas_adhoc_rates_g));
@@ -586,20 +583,7 @@ static int wlan_get_mode(struct net_device *dev,
ENTER();
- switch (adapter->inframode) {
- case wlan802_11ibss:
- *uwrq = IW_MODE_ADHOC;
- break;
-
- case wlan802_11infrastructure:
- *uwrq = IW_MODE_INFRA;
- break;
-
- default:
- case wlan802_11autounknown:
- *uwrq = IW_MODE_AUTO;
- break;
- }
+ *uwrq = adapter->mode;
LEAVE();
return 0;
@@ -1002,149 +986,18 @@ static const struct iw_priv_args wlan_private_args[] = {
/*
* { cmd, set_args, get_args, name }
*/
- {
- WLANSCAN_TYPE,
- IW_PRIV_TYPE_CHAR | 8,
- IW_PRIV_TYPE_CHAR | 8,
- "scantype"},
-
- {
- WLAN_SETINT_GETINT,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- ""},
- {
- WLANNF,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getNF"},
- {
- WLANRSSI,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getRSSI"},
- {
- WLANENABLE11D,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "enable11d"},
- {
- WLANADHOCGRATE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "adhocgrate"},
-
- {
- WLAN_SUBCMD_SET_PRESCAN,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "prescan"},
- {
- WLAN_SETONEINT_GETONEINT,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- ""},
- {
- WLAN_BEACON_INTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "bcninterval"},
- {
- WLAN_LISTENINTRVL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "lolisteninter"},
- {
- WLAN_TXCONTROL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "txcontrol"},
- {
- WLAN_NULLPKTINTERVAL,
- IW_PRIV_TYPE_INT | 1,
- IW_PRIV_TYPE_INT | 1,
- "psnullinterval"},
/* Using iwpriv sub-command feature */
{
WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
""},
-
- {
- WLAN_SUBCMD_SETRXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setrxant"},
- {
- WLAN_SUBCMD_SETTXANTENNA,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "settxant"},
- {
- WLANSETAUTHALG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "authalgs",
- },
- {
- WLANSET8021XAUTHALG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "8021xauthalgs",
- },
- {
- WLANSETENCRYPTIONMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "encryptionmode",
- },
{
WLANSETREGION,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"setregioncode"},
{
- WLAN_SET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setlisteninter"},
- {
- WLAN_SET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setmultipledtim"},
- {
- WLAN_SET_ATIM_WINDOW,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "atimwindow"},
- {
- WLANSETBCNAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setbcnavg"},
- {
- WLANSETDATAAVG,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "setdataavg"},
- {
- WLAN_SET_LINKMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "linkmode"},
- {
- WLAN_SET_RADIOMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "radiomode"},
- {
- WLAN_SET_DEBUGMODE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- IW_PRIV_TYPE_NONE,
- "debugmode"},
- {
WLAN_SUBCMD_MESH_SET_TTL,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
@@ -1160,41 +1013,6 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getregioncode"},
{
- WLAN_GET_LISTEN_INTERVAL,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getlisteninter"},
- {
- WLAN_GET_MULTIPLE_DTIM,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getmultipledtim"},
- {
- WLAN_GET_TX_RATE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "gettxrate"},
- {
- WLANGETBCNAVG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "getbcnavg"},
- {
- WLAN_GET_LINKMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_linkmode"},
- {
- WLAN_GET_RADIOMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_radiomode"},
- {
- WLAN_GET_DEBUGMODE,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
- "get_debugmode"},
- {
WLAN_SUBCMD_FWT_CLEANUP,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
@@ -1210,61 +1028,11 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"mesh_get_ttl"},
{
- WLAN_SETNONE_GETTWELVE_CHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- ""},
- {
- WLAN_SUBCMD_GETRXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "getrxant"},
- {
- WLAN_SUBCMD_GETTXANTENNA,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettxant"},
- {
- WLAN_GET_TSF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 12,
- "gettsf"},
- {
WLAN_SETNONE_GETNONE,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
""},
{
- WLANDEAUTH,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "deauth"},
- {
- WLANADHOCSTOP,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "adhocstop"},
- {
- WLANRADIOON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radioon"},
- {
- WLANRADIOOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "radiooff"},
- {
- WLANWLANIDLEON,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-on"},
- {
- WLANWLANIDLEOFF,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_NONE,
- "wlanidle-off"},
- {
WLAN_SUBCMD_FWT_RESET,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
@@ -1327,90 +1095,15 @@ static const struct iw_priv_args wlan_private_args[] = {
IW_PRIV_TYPE_CHAR | 128,
"fwt_list_route"},
{
- WLANSCAN_MODE,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "scanmode"},
- {
- WLAN_GET_ADHOC_STATUS,
- IW_PRIV_TYPE_CHAR | 128,
- IW_PRIV_TYPE_CHAR | 128,
- "getadhocstatus"},
- {
- WLAN_SETNONE_GETWORDCHAR,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | 128,
- ""},
- {
- WLANSETWPAIE,
- IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 24,
- IW_PRIV_TYPE_NONE,
- "setwpaie"},
- {
- WLANGETLOG,
- IW_PRIV_TYPE_NONE,
- IW_PRIV_TYPE_CHAR | GETLOG_BUFSIZE,
- "getlog"},
- {
WLAN_SET_GET_SIXTEEN_INT,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
""},
{
- WLAN_TPCCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "tpccfg"},
- {
- WLAN_POWERCFG,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "powercfg"},
- {
- WLAN_AUTO_FREQ_SET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "setafc"},
- {
- WLAN_AUTO_FREQ_GET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getafc"},
- {
- WLAN_SCANPROBES,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "scanprobes"},
- {
WLAN_LED_GPIO_CTRL,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
"ledgpio"},
- {
- WLAN_ADAPT_RATESET,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "rateadapt"},
- {
- WLAN_INACTIVITY_TIMEOUT,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "inactivityto"},
- {
- WLANSNR,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getSNR"},
- {
- WLAN_GET_RATE,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrate"},
- {
- WLAN_GET_RXINFO,
- IW_PRIV_TYPE_INT | 16,
- IW_PRIV_TYPE_INT | 16,
- "getrxinfo"},
};
static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
@@ -1434,7 +1127,7 @@ static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
ENTER();
- priv->wstats.status = adapter->inframode;
+ priv->wstats.status = adapter->mode;
/* If we're not associated, all quality values are meaningless */
if (adapter->connect_status != libertas_connected)
@@ -1568,13 +1261,12 @@ static int wlan_set_freq(struct net_device *dev, struct iw_request_info *info,
if (!cfp) {
rc = -EINVAL;
} else {
- if (adapter->inframode == wlan802_11ibss) {
+ if (adapter->mode == IW_MODE_ADHOC) {
rc = changeadhocchannel(priv, channel);
/* If station is WEP enabled, send the
* command to set WEP in firmware
*/
- if (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) {
+ if (adapter->secinfo.wep_enabled) {
lbs_pr_debug(1, "set_freq: WEP enabled\n");
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_set_wep,
@@ -1716,49 +1408,31 @@ static int wlan_set_mode(struct net_device *dev,
wlan_private *priv = dev->priv;
wlan_adapter *adapter = priv->adapter;
struct assoc_request * assoc_req;
- enum WLAN_802_11_NETWORK_INFRASTRUCTURE new_mode;
ENTER();
- switch (*uwrq) {
- case IW_MODE_ADHOC:
- lbs_pr_debug(1, "Wanted mode is ad-hoc: current datarate=%#x\n",
- adapter->datarate);
- new_mode = wlan802_11ibss;
- adapter->adhocchannel = DEFAULT_AD_HOC_CHANNEL;
- break;
-
- case IW_MODE_INFRA:
- lbs_pr_debug(1, "Wanted mode is Infrastructure\n");
- new_mode = wlan802_11infrastructure;
- break;
-
- case IW_MODE_AUTO:
- lbs_pr_debug(1, "Wanted mode is Auto\n");
- new_mode = wlan802_11autounknown;
- break;
-
- default:
- lbs_pr_debug(1, "Wanted mode is Unknown: 0x%x\n", *uwrq);
- return -EINVAL;
+ if ( (*uwrq != IW_MODE_ADHOC)
+ && (*uwrq != IW_MODE_INFRA)
+ && (*uwrq != IW_MODE_AUTO)) {
+ lbs_pr_debug(1, "Invalid mode: 0x%x\n", *uwrq);
+ ret = -EINVAL;
+ goto out;
}
mutex_lock(&adapter->lock);
assoc_req = wlan_get_association_request(adapter);
if (!assoc_req) {
ret = -ENOMEM;
+ wlan_cancel_association_work(priv);
} else {
- assoc_req->mode = new_mode;
- }
-
- if (ret == 0) {
+ assoc_req->mode = *uwrq;
set_bit(ASSOC_FLAG_MODE, &assoc_req->flags);
wlan_postpone_association_work(priv);
- } else {
- wlan_cancel_association_work(priv);
+ lbs_pr_debug(1, "Switching to mode: 0x%x\n", *uwrq);
}
mutex_unlock(&adapter->lock);
+out:
LEAVE();
return ret;
}
@@ -1789,13 +1463,13 @@ static int wlan_get_encode(struct net_device *dev,
dwrq->flags = 0;
/* Authentication method */
- switch (adapter->secinfo.authmode) {
- case wlan802_11authmodeopen:
+ switch (adapter->secinfo.auth_mode) {
+ case IW_AUTH_ALG_OPEN_SYSTEM:
dwrq->flags = IW_ENCODE_OPEN;
break;
- case wlan802_11authmodeshared:
- case wlan802_11authmodenetworkEAP:
+ case IW_AUTH_ALG_SHARED_KEY:
+ case IW_AUTH_ALG_LEAP:
dwrq->flags = IW_ENCODE_RESTRICTED;
break;
default:
@@ -1803,8 +1477,9 @@ static int wlan_get_encode(struct net_device *dev,
break;
}
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
- || adapter->secinfo.WPAenabled || adapter->secinfo.WPA2enabled) {
+ if ( adapter->secinfo.wep_enabled
+ || adapter->secinfo.WPAenabled
+ || adapter->secinfo.WPA2enabled) {
dwrq->flags &= ~IW_ENCODE_DISABLED;
} else {
dwrq->flags |= IW_ENCODE_DISABLED;
@@ -1818,8 +1493,7 @@ static int wlan_get_encode(struct net_device *dev,
if (index < 0)
index = adapter->wep_tx_keyidx;
- if ((adapter->wep_keys[index].len) &&
- (adapter->secinfo.WEPstatus == wlan802_11WEPenabled)) {
+ if ((adapter->wep_keys[index].len) && adapter->secinfo.wep_enabled) {
memcpy(extra, adapter->wep_keys[index].key,
adapter->wep_keys[index].len);
dwrq->length = adapter->wep_keys[index].len;
@@ -1903,7 +1577,7 @@ static int wlan_set_wep_key(struct assoc_request *assoc_req,
assoc_req->wep_tx_keyidx = index;
}
- assoc_req->secinfo.WEPstatus = wlan802_11WEPenabled;
+ assoc_req->secinfo.wep_enabled = 1;
LEAVE();
return 0;
@@ -1932,10 +1606,10 @@ static void disable_wep(struct assoc_request *assoc_req)
int i;
/* Set Open System auth mode */
- assoc_req->secinfo.authmode = wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
/* Clear WEP keys and mark WEP as disabled */
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
for (i = 0; i < 4; i++)
assoc_req->wep_keys[i].len = 0;
@@ -1987,8 +1661,7 @@ static int wlan_set_encode(struct net_device *dev,
/* If WEP isn't enabled, or if there is no key data but a valid
* index, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
- || (dwrq->length == 0 && !is_default))
+ if (!assoc_req->secinfo.wep_enabled || (dwrq->length == 0 && !is_default))
set_tx_key = 1;
ret = wlan_set_wep_key(assoc_req, extra, dwrq->length, index, set_tx_key);
@@ -2001,9 +1674,9 @@ static int wlan_set_encode(struct net_device *dev,
set_bit(ASSOC_FLAG_WEP_TX_KEYIDX, &assoc_req->flags);
if (dwrq->flags & IW_ENCODE_RESTRICTED) {
- assoc_req->secinfo.authmode = wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->flags & IW_ENCODE_OPEN) {
- assoc_req->secinfo.authmode = wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
out:
@@ -2056,30 +1729,31 @@ static int wlan_get_encodeext(struct net_device *dev,
if (!ext->ext_flags & IW_ENCODE_EXT_GROUP_KEY &&
ext->alg != IW_ENCODE_ALG_WEP) {
- if (index != 0 || adapter->inframode != wlan802_11infrastructure)
+ if (index != 0 || adapter->mode != IW_MODE_INFRA)
goto out;
}
dwrq->flags = index + 1;
memset(ext, 0, sizeof(*ext));
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled)
- && !adapter->secinfo.WPAenabled && !adapter->secinfo.WPA2enabled) {
+ if ( !adapter->secinfo.wep_enabled
+ && !adapter->secinfo.WPAenabled
+ && !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_NONE;
ext->key_len = 0;
dwrq->flags |= IW_ENCODE_DISABLED;
} else {
u8 *key = NULL;
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
+ if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_WEP;
ext->key_len = adapter->wep_keys[index].len;
key = &adapter->wep_keys[index].key[0];
- } else if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled) &&
- (adapter->secinfo.WPAenabled ||
- adapter->secinfo.WPA2enabled)) {
+ } else if ( !adapter->secinfo.wep_enabled
+ && (adapter->secinfo.WPAenabled ||
+ adapter->secinfo.WPA2enabled)) {
/* WPA */
ext->alg = IW_ENCODE_ALG_TKIP;
ext->key_len = 0;
@@ -2149,7 +1823,7 @@ static int wlan_set_encodeext(struct net_device *dev,
/* If WEP isn't enabled, or if there is no key data but a valid
* index, or if the set-TX-key flag was passed, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
+ if ( !assoc_req->secinfo.wep_enabled
|| (dwrq->length == 0 && !is_default)
|| (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY))
set_tx_key = 1;
@@ -2161,11 +1835,9 @@ static int wlan_set_encodeext(struct net_device *dev,
goto out;
if (dwrq->flags & IW_ENCODE_RESTRICTED) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->flags & IW_ENCODE_OPEN) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
/* Mark the various WEP bits as modified */
@@ -2350,15 +2022,13 @@ static int wlan_set_auth(struct net_device *dev,
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA) {
assoc_req->secinfo.WPAenabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA2) {
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
updated = 1;
break;
@@ -2376,14 +2046,11 @@ static int wlan_set_auth(struct net_device *dev,
case IW_AUTH_80211_AUTH_ALG:
if (dwrq->value & IW_AUTH_ALG_SHARED_KEY) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeshared;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_SHARED_KEY;
} else if (dwrq->value & IW_AUTH_ALG_OPEN_SYSTEM) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
} else if (dwrq->value & IW_AUTH_ALG_LEAP) {
- assoc_req->secinfo.authmode =
- wlan802_11authmodenetworkEAP;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_LEAP;
} else {
ret = -EINVAL;
}
@@ -2396,9 +2063,8 @@ static int wlan_set_auth(struct net_device *dev,
!assoc_req->secinfo.WPA2enabled) {
assoc_req->secinfo.WPAenabled = 1;
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
- assoc_req->secinfo.authmode =
- wlan802_11authmodeopen;
+ assoc_req->secinfo.wep_enabled = 0;
+ assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
} else {
assoc_req->secinfo.WPAenabled = 0;
@@ -2455,19 +2121,7 @@ static int wlan_get_auth(struct net_device *dev,
break;
case IW_AUTH_80211_AUTH_ALG:
- switch (adapter->secinfo.authmode) {
- case wlan802_11authmodeshared:
- dwrq->value = IW_AUTH_ALG_SHARED_KEY;
- break;
- case wlan802_11authmodeopen:
- dwrq->value = IW_AUTH_ALG_OPEN_SYSTEM;
- break;
- case wlan802_11authmodenetworkEAP:
- dwrq->value = IW_AUTH_ALG_LEAP;
- break;
- default:
- break;
- }
+ dwrq->value = adapter->secinfo.auth_mode;
break;
case IW_AUTH_WPA_ENABLED:
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index 39f367c..15cfaaf 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -10,88 +10,22 @@
/** PRIVATE CMD ID */
#define WLANIOCTL SIOCIWFIRSTPRIV
-#define WLANSETWPAIE (WLANIOCTL + 0)
-
-#define WLAN_SETINT_GETINT (WLANIOCTL + 7)
-#define WLANNF 1
-#define WLANRSSI 2
-#define WLANENABLE11D 5
-#define WLANADHOCGRATE 6
-#define WLAN_SUBCMD_SET_PRESCAN 11
-
#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
-#define WLANDEAUTH 1
-#define WLANRADIOON 2
-#define WLANRADIOOFF 3
-#define WLANREMOVEADHOCAES 4
-#define WLANADHOCSTOP 5
-#define WLANCIPHERTEST 6
-#define WLANCRYPTOTEST 7
-
-#define WLANWLANIDLEON 10
-#define WLANWLANIDLEOFF 11
#define WLAN_SUBCMD_BT_RESET 13
#define WLAN_SUBCMD_FWT_RESET 14
-#define WLANGETLOG (WLANIOCTL + 9)
-#define GETLOG_BUFSIZE 300
-
-#define WLANSCAN_TYPE (WLANIOCTL + 11)
-
#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
#define WLANGETREGION 1
-#define WLAN_GET_LISTEN_INTERVAL 2
-#define WLAN_GET_MULTIPLE_DTIM 3
-#define WLAN_GET_TX_RATE 4
-#define WLANGETBCNAVG 5
-#define WLAN_GET_LINKMODE 6
-#define WLAN_GET_RADIOMODE 7
-#define WLAN_GET_DEBUGMODE 8
#define WLAN_SUBCMD_FWT_CLEANUP 15
#define WLAN_SUBCMD_FWT_TIME 16
#define WLAN_SUBCMD_MESH_GET_TTL 17
-#define WLANREGCFRDWR (WLANIOCTL + 18)
-
-#define WLAN_SETNONE_GETTWELVE_CHAR (WLANIOCTL + 19)
-#define WLAN_SUBCMD_GETRXANTENNA 1
-#define WLAN_SUBCMD_GETTXANTENNA 2
-#define WLAN_GET_TSF 3
-
-#define WLAN_SETNONE_GETWORDCHAR (WLANIOCTL + 21)
-#define WLANGETADHOCAES 1
-
-#define WLAN_SETONEINT_GETONEINT (WLANIOCTL + 23)
-#define WLAN_BEACON_INTERVAL 1
-#define WLAN_LISTENINTRVL 4
-
-#define WLAN_TXCONTROL 6
-#define WLAN_NULLPKTINTERVAL 7
-
#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
-#define WLAN_SUBCMD_SETRXANTENNA 1
-#define WLAN_SUBCMD_SETTXANTENNA 2
-#define WLANSETAUTHALG 5
-#define WLANSET8021XAUTHALG 6
-#define WLANSETENCRYPTIONMODE 7
#define WLANSETREGION 8
-#define WLAN_SET_LISTEN_INTERVAL 9
-
-#define WLAN_SET_MULTIPLE_DTIM 10
-#define WLAN_SET_ATIM_WINDOW 11
-#define WLANSETBCNAVG 13
-#define WLANSETDATAAVG 14
-#define WLAN_SET_LINKMODE 15
-#define WLAN_SET_RADIOMODE 16
-#define WLAN_SET_DEBUGMODE 17
#define WLAN_SUBCMD_MESH_SET_TTL 18
#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
-#define WLANSCAN_MODE 6
-
-#define WLAN_GET_ADHOC_STATUS 9
-
#define WLAN_SUBCMD_BT_ADD 18
#define WLAN_SUBCMD_BT_DEL 19
#define WLAN_SUBCMD_BT_LIST 20
@@ -103,27 +37,8 @@
#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
-#define WLAN_TPCCFG 1
-#define WLAN_POWERCFG 2
-
-#define WLAN_AUTO_FREQ_SET 3
-#define WLAN_AUTO_FREQ_GET 4
#define WLAN_LED_GPIO_CTRL 5
-#define WLAN_SCANPROBES 6
-#define WLAN_ADAPT_RATESET 8
-#define WLAN_INACTIVITY_TIMEOUT 9
-#define WLANSNR 10
-#define WLAN_GET_RATE 11
-#define WLAN_GET_RXINFO 12
-
-#define WLANCMD52RDWR (WLANIOCTL + 30)
-#define WLANCMD53RDWR (WLANIOCTL + 31)
-#define CMD53BUFLEN 32
-#define REG_MAC 0x19
-#define REG_BBP 0x1a
-#define REG_RF 0x1b
-#define REG_EEPROM 0x59
#define WLAN_LINKMODE_802_3 0
#define WLAN_LINKMODE_802_11 2
#define WLAN_RADIOMODE_NONE 0
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/