Re: b44: regression in 2.6.22 (resend)

[Michael Buesch]

On Sunday 27 May 2007 21:25:17 Maximilian Engelhardt wrote:
> 2.6.21.1:
> [  5] local 192.168.1.2 port 58414 connected with 192.168.1.1 port 5001
> [  5]  0.0-60.6 sec  1.13 MBytes    157 Kbits/sec
> [  4] local 192.168.1.2 port 5001 connected with 192.168.1.1 port 57837
> [  4]  0.0-63.1 sec  2.82 MBytes    375 Kbits/sec

> 2.6.22-rc3:
> [  5] local 192.168.1.2 port 46557 connected with 192.168.1.1 port 5001
> [  5]  0.0-60.4 sec  58.9 MBytes  8.18 Mbits/sec
> [  4] local 192.168.1.2 port 5001 connected with 192.168.1.1 port 51633
> [  4]  0.0-63.1 sec  7.27 MBytes    967 Kbits/sec

This is the diff between these two kernels.
I'm not sure why you see a much better TX throughput here.

Can you re-check to make sure it's not just some test-jitter?


--- linux-2.6.21.1/drivers/net/b44.c    2007-05-27 22:58:01.000000000 +0200
+++ linux-2.6.22-rc3/drivers/net/b44.c  2007-05-27 23:01:44.000000000 +0200
@@ -825,12 +825,11 @@
                        if (copy_skb == NULL)
                                goto drop_it_no_recycle;
 
-                       copy_skb->dev = bp->dev;
                        skb_reserve(copy_skb, 2);
                        skb_put(copy_skb, len);
                        /* DMA sync done above, copy just the actual packet */
-                       memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
-
+                       skb_copy_from_linear_data_offset(skb, bp->rx_offset,
+                                                        copy_skb->data, len);
                        skb = copy_skb;
                }
                skb->ip_summed = CHECKSUM_NONE;
@@ -1007,7 +1006,8 @@
                        goto err_out;
                }
 
-               memcpy(skb_put(bounce_skb, len), skb->data, skb->len);
+               skb_copy_from_linear_data(skb, skb_put(bounce_skb, len),
+                                         skb->len);
                dev_kfree_skb_any(skb);
                skb = bounce_skb;
        }

-- 
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/