Re: b44: regression in 2.6.22 (resend)

[Jeff Garzik]

Gary Zambrano wrote:
> The b44 interrupt status reg returns a value of 0 if no interrupts are
> pending. The b44 uses a mask to determine which bits (events) can
> generate device interrupts on the system. If the masked interrupt status
> register bits are not asserted, then the b44 will return to the system
> with handled = 0. 
> So, I think the way the b44 interrupt code is written should be ok and
> not a bug. 


This is normal.

We check for 0xffffffff because that is often how a fault is indicated, 
when the memory location is read during or immediately after hotplug (or 
if the PCI bus is truly faulty).  So for most hardware, you see

tmp = read(irq status)
if (!tmp)
	return irq-none		/* no irq events raised */
if (tmp == 0xffffffff)
	return irq-none		/* hot unplug or h/w fault */

and the method that determines no interrupt handling is needed.

Regards,

	Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/