Re: Compact Flash performance...

[Daniel J Blueman]

On 31/05/07, Mark Lord <liml@xxxxxx> wrote:
> Daniel J Blueman wrote:
> > Whoops, yes. Here is the expected data:
[snip]
> Thanks.  I'll use that data to update/validate future versions of hdparm.
> At UDMA66, it *should* be capable of the 40MByte/sec realm of readback perf,
> assuming the card itself is really that fast.

hdparm in the other identify mode does list the UDMA3/4 modes twice
[1], which looks odd.

> I don't know too much about the specifics, though, but perhaps the
> card is only capable of full speed in PIO6, which requires special cabling
> and is currently unsupported in libata (?).

Seems less likely, as the Extreme IV reader (and another) supports
UDMA mode 4; in PIO mode 6, they apparently top out at 17MB/s [2],
which seems reasonable.

> Another factor, is that hdparm performs discrete, non-overlapping,
> reads of 1MByte chunks for its timing test.  Some drives cannot achieve
> full performance with such (relatively) large gaps between IO's.

100MB transfers still achieve 32MB/s:

# dd if=/dev/sdb of=/dev/null bs=100000k count=10
10+0 records in
10+0 records out
1024000000 bytes (1.0 GB) copied, 31.9328 seconds, 32.1 MB/s

> Also, just for fun, you could try "hdparm --direct -t /dev/sdb"

# hdparm --direct -t /dev/sdb

/dev/sdb:
Timing O_DIRECT disk reads:   96 MB in  3.05 seconds =  31.47 MB/sec

It is conceivable that the controller in the two particular readers
which get 40MB/s are doing some kind of prefetching, but seems seems
like an extreme gain.

I'll check things out with the IDE PIIX code also. Thanks for your help!
 Daniel

> Cheers

--- [1]

# hdparm -i /dev/sdb

/dev/sdb:

Model=SanDisk SDCFX-4096                      , FwRev=HDX 4.04,
SerialNo=    116802D2807J3335
Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic }
RawCHS=7964/16/63, TrkSize=0, SectSize=576, ECCbytes=4
BuffType=DualPort, BuffSize=1kB, MaxMultSect=4, MultSect=?0?
CurCHS=7964/16/63, CurSects=8027712, LBA=yes, LBAsects=8027712
IORDY=no, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes:  pio0 pio1 pio2 pio3 pio4
DMA modes:  mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma3 *udma4
AdvancedPM=no WriteCache=disabled
Drive conforms to: Unspecified:  ATA/ATAPI-4

* signifies the current active mode

--- [2]

http://www.robgalbraith.com/bins/content_page.asp?cid=7-7896-8475
--
Daniel J Blueman
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/