Re: stallion driver dmesg notice

From: Jiri Slaby
Date: Sun Jun 03 2007 - 17:15:03 EST


Ingo Korb napsal(a):
> Hi!
>
> The stallion driver in 2.6.21.3 put this little notice in my dmesg:
>
> === Cut ===
> Stallion Multiport Serial Driver: version 5.6.0
> stallion 0000:00:0b.0: please, report this to LKML: 100b/d001/ffffff
> ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
> stallion: probe of 0000:00:0b.0 failed with error -16
> === Cut ===
>
> The card is a EC8/32-PCI with a single connected panel. It used to work
> well with 2.4, mostly well with a patched 2.6.8.1, really bad
> (unstable, lost characters) with 2.6.11(?) and doesn't work at all with
> 2.6.21.3.
>
> Should I test it with an EC8/64-PCI? The /32 (ab)uses an IDE controller
> chip as PCI interface, the /64 uses a PLX PCI9050.
>
> lspci -vv for the EC8/32:
> === Cut ===
> 00:0b.0 Class ffff: National Semiconductor Corporation 87410 IDE (rev
> ff) (prog-if ff)
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at d100 [size=8]
> Region 1: I/O ports at d200 [size=4]
> Region 2: I/O ports at d300 [size=8]
> Region 3: I/O ports at d400 [size=4]
> === Cut ===

Thanks. I will look into it,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/