Re: [PATCH] Re: Linux v2.6.22-rc3

[Tejun Heo]

Gregor Jasny wrote:
> 2007/6/2, Jeff Garzik <jeff@xxxxxxxxxx>:
>> Does this patch change the behavior at all?
> 
> No. It still times out. I've raised the first timeout to 60 seconds
> but still no luck.

Let's see where we're failing.  Please apply the attached patch and
report what kernel says.

Thanks.

-- 
tejun
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4733f00..ae6f177 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3053,8 +3053,11 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	if (dev0) {
 		rc = ata_wait_ready(ap, deadline);
 		if (rc) {
-			if (rc != -ENODEV)
+			if (rc != -ENODEV) {
+				ata_port_printk(ap, KERN_WARNING,
+						"ata_bus_post_reset: EXIT0\n");
 				return rc;
+			}
 			ret = rc;
 		}
 	}
@@ -3070,15 +3073,21 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 		lbal = ioread8(ioaddr->lbal_addr);
 		if ((nsect == 1) && (lbal == 1))
 			break;
-		if (time_after(jiffies, deadline))
+		if (time_after(jiffies, deadline)) {
+			ata_port_printk(ap, KERN_WARNING,
+					"ata_bus_post_reset: EXIT1\n");
 			return -EBUSY;
+		}
 		msleep(50);	/* give drive a breather */
 	}
 	if (dev1) {
 		rc = ata_wait_ready(ap, deadline);
 		if (rc) {
-			if (rc != -ENODEV)
+			if (rc != -ENODEV) {
+				ata_port_printk(ap, KERN_WARNING,
+						"ata_bus_post_reset: EXIT2\n");
 				return rc;
+			}
 			ret = rc;
 		}
 	}
@@ -3090,6 +3099,7 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask,
 	if (dev0)
 		ap->ops->dev_select(ap, 0);
 
+	ata_port_printk(ap, KERN_WARNING, "ata_bus_post_reset: EXIT3\n");
 	return ret;
 }