Re: [PATCH] b44: power down PHY when interface down

[Michael Buesch]

On Sunday 01 July 2007 17:00:06 Lennert Buytenhek wrote:
> A multimeter should do the trick, but I would advise against this
> if you're not totally comfortable with hacking hardware.

Ok, the resistor on the board is 100ohm, which is too big
according to the docs of the extender.
So what I tried is to connect a 10ohm resistor between
IDSEL and the AD pin, on the extender itself. But it didn't
do the trick. It still doesn't work.
I also connected a 10ohm resistor between IDSEL and the AD
pin directly on the mainboard. Also doesn't work. So I guess
it's some other issue.
But I have no idea what could be wrong besides that.

-- 
Greetings Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/