[PATCH] GEODE: reboot fixup for geode machines with CS5536 boards

[Andres Salomon]

Writing to MSR 0x51400017 forces a hard reset on CS5536-based machines,
this has the reboot fixup do just that if such a board is detected.

Acked-by: Jordan Crouse <jordan.crouse@xxxxxxx>
Signed-off-by: Andres Salomon <dilinger@xxxxxxxxxx>
---
 arch/i386/Kconfig                |    4 ++--
 arch/i386/kernel/reboot_fixups.c |   13 +++++++++++++
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 7be62ca..f6f6e4b 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -441,8 +441,8 @@ config X86_REBOOTFIXUPS
 	  this config is intended, is when reboot ends with a stalled/hung
 	  system.
 
-	  Currently, the only fixup is for the Geode GX1/CS5530A/TROM2.1.
-	  combination.
+	  Currently, the only fixup is for the Geode machines using
+	  CS5530A and CS5536 chipsets.
 
 	  Say Y if you want to enable the fixup. Currently, it's safe to
 	  enable this option even if you don't need it.
diff --git a/arch/i386/kernel/reboot_fixups.c b/arch/i386/kernel/reboot_fixups.c
index 2d78d91..03e1cce 100644
--- a/arch/i386/kernel/reboot_fixups.c
+++ b/arch/i386/kernel/reboot_fixups.c
@@ -5,12 +5,14 @@
  *
  * List of supported fixups:
  * geode-gx1/cs5530a - Jaya Kumar <jayalk@xxxxxxxxxxxx>
+ * geode-gx/lx/cs5536 - Andres Salomon <dilinger@xxxxxxxxxx>
  *
  */
 
 #include <asm/delay.h>
 #include <linux/pci.h>
 #include <asm/reboot_fixups.h>
+#include <asm/msr.h>
 
 static void cs5530a_warm_reset(struct pci_dev *dev)
 {
@@ -21,6 +23,16 @@ static void cs5530a_warm_reset(struct pci_dev *dev)
 	return;
 }
 
+static void cs5536_warm_reset(struct pci_dev *dev)
+{
+	/*
+	 * 6.6.2.12 Soft Reset (DIVIL_SOFT_RESET)
+	 * writing 1 to the LSB of this MSR causes a hard reset.
+	 */
+	wrmsrl(0x51400017, 1ULL);
+	udelay(50); /* shouldn't get here but be safe and spin a while */
+}
+
 struct device_fixup {
 	unsigned int vendor;
 	unsigned int device;
@@ -29,6 +41,7 @@ struct device_fixup {
 
 static struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
 };
 
 /*
-- 
1.5.2.2
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/