[patch-mm 12/33] x86_64: apic.c coding style janitor work

From: Thomas Gleixner
Date: Sun Jul 15 2007 - 12:10:16 EST


Fix coding style, white space wreckage and remove unused code.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>

---
arch/x86_64/kernel/apic.c | 73 ++++++++++++++++++----------------------------
1 file changed, 30 insertions(+), 43 deletions(-)

Index: linux-2.6.22-rc6-mm/arch/x86_64/kernel/apic.c
===================================================================
--- linux-2.6.22-rc6-mm.orig/arch/x86_64/kernel/apic.c 2007-07-15 17:31:31.000000000 +0200
+++ linux-2.6.22-rc6-mm/arch/x86_64/kernel/apic.c 2007-07-15 17:48:59.000000000 +0200
@@ -92,8 +92,9 @@ unsigned int safe_apic_wait_icr_idle(voi
void enable_NMI_through_LVT0 (void * dummy)
{
unsigned int v;
-
- v = APIC_DM_NMI; /* unmask and set to NMI */
+
+ /* unmask and set to NMI */
+ v = APIC_DM_NMI;
apic_write(APIC_LVT0, v);
}

@@ -120,7 +121,7 @@ void ack_bad_irq(unsigned int irq)
* holds up an irq slot - in excessive cases (when multiple
* unexpected vectors occur) that might lock up the APIC
* completely.
- * But don't ack when the APIC is disabled. -AK
+ * But don't ack when the APIC is disabled. -AK
*/
if (!disable_apic)
ack_APIC_irq();
@@ -616,7 +617,7 @@ early_param("apic", apic_set_verbosity);
* Detect and enable local APICs on non-SMP boards.
* Original code written by Keir Fraser.
* On AMD64 we trust the BIOS - if it says no APIC it is likely
- * not correctly set up (usually the APIC timer won't work etc.)
+ * not correctly set up (usually the APIC timer won't work etc.)
*/

static int __init detect_init_APIC (void)
@@ -789,13 +790,13 @@ static void setup_APIC_timer(unsigned in
local_irq_save(flags);

/* wait for irq slice */
- if (hpet_address && hpet_use_timer) {
- int trigger = hpet_readl(HPET_T0_CMP);
- while (hpet_readl(HPET_COUNTER) >= trigger)
- /* do nothing */ ;
- while (hpet_readl(HPET_COUNTER) < trigger)
- /* do nothing */ ;
- } else {
+ if (hpet_address && hpet_use_timer) {
+ int trigger = hpet_readl(HPET_T0_CMP);
+ while (hpet_readl(HPET_COUNTER) >= trigger)
+ /* do nothing */ ;
+ while (hpet_readl(HPET_COUNTER) < trigger)
+ /* do nothing */ ;
+ } else {
int c1, c2;
outb_p(0x00, 0x43);
c2 = inb_p(0x40);
@@ -881,10 +882,10 @@ static unsigned int calibration_result;

void __init setup_boot_APIC_clock (void)
{
- if (disable_apic_timer) {
- printk(KERN_INFO "Disabling APIC timer\n");
- return;
- }
+ if (disable_apic_timer) {
+ printk(KERN_INFO "Disabling APIC timer\n");
+ return;
+ }

printk(KERN_INFO "Using local APIC timer interrupts.\n");
using_apic_timer = 1;
@@ -1128,20 +1129,6 @@ asmlinkage void smp_spurious_interrupt(v
if (v & (1 << (SPURIOUS_APIC_VECTOR & 0x1f)))
ack_APIC_irq();

-#if 0
- static unsigned long last_warning;
- static unsigned long skipped;
-
- /* see sw-dev-man vol 3, chapter 7.4.13.5 */
- if (time_before(last_warning+30*HZ,jiffies)) {
- printk(KERN_INFO "spurious APIC interrupt on CPU#%d, %ld skipped.\n",
- smp_processor_id(), skipped);
- last_warning = jiffies;
- skipped = 0;
- } else {
- skipped++;
- }
-#endif
irq_exit();
}

@@ -1173,11 +1160,11 @@ asmlinkage void smp_error_interrupt(void
7: Illegal register address
*/
printk (KERN_DEBUG "APIC error on CPU%d: %02x(%02x)\n",
- smp_processor_id(), v , v1);
+ smp_processor_id(), v , v1);
irq_exit();
}

-int disable_apic;
+int disable_apic;

/*
* This initializes the IO-APIC and APIC hardware if this is
@@ -1185,11 +1172,11 @@ int disable_apic;
*/
int __init APIC_init_uniprocessor (void)
{
- if (disable_apic) {
+ if (disable_apic) {
printk(KERN_INFO "Apic disabled\n");
- return -1;
+ return -1;
}
- if (!cpu_has_apic) {
+ if (!cpu_has_apic) {
disable_apic = 1;
printk(KERN_INFO "Apic disabled by BIOS\n");
return -1;
@@ -1211,8 +1198,8 @@ int __init APIC_init_uniprocessor (void)
return 0;
}

-static __init int setup_disableapic(char *str)
-{
+static __init int setup_disableapic(char *str)
+{
disable_apic = 1;
clear_bit(X86_FEATURE_APIC, boot_cpu_data.x86_capability);
return 0;
@@ -1220,10 +1207,10 @@ static __init int setup_disableapic(char
early_param("disableapic", setup_disableapic);

/* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str)
-{
+static __init int setup_nolapic(char *str)
+{
return setup_disableapic(str);
-}
+}
early_param("nolapic", setup_nolapic);

static int __init parse_lapic_timer_c2_ok(char *arg)
@@ -1233,13 +1220,13 @@ static int __init parse_lapic_timer_c2_o
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);

-static __init int setup_noapictimer(char *str)
-{
+static __init int setup_noapictimer(char *str)
+{
if (str[0] != ' ' && str[0] != 0)
return 0;
disable_apic_timer = 1;
return 1;
-}
+}

static __init int setup_apicmaintimer(char *str)
{
@@ -1264,5 +1251,5 @@ static __init int setup_apicpmtimer(char
}
__setup("apicpmtimer", setup_apicpmtimer);

-__setup("noapictimer", setup_noapictimer);
+__setup("noapictimer", setup_noapictimer);


--

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/