Re: PCI: Unable to reserve mem region problem

[Chuck Ebbert]

On 09/05/2007 10:32 AM, Karl Bellve wrote:
> 
> Please CC any response. Thanks.
> 
> I am having an issue with a Supermicro h8dce motherboard and failure to
> recognize a 5th SATA drive after upgrading to Fedora 7.
> 
> This motherboard has 8 sata ports that use the sata_nv driver.
> 
> The lack of seeing the 5th SATA drive shows up in 2.6.22 kernels, such
> as kernel-2.6.22.2-42.fc6 and kernel-2.6.22.1-41.fc7.
> 
> The 5th SATA drive can still be detected in 2.6.20 kernels such as
> kernel-2.6.20-1.2933.fc6 (I am currently using this kernel).
> 
> From dmesg, it appears the reason I am not seeing the 5th SATA drive
> (second SATA controller) is the following error:
> 
> Aug 30 14:08:03 alcor kernel: sata_nv 0000:80:08.0: Using ADMA mode
> Aug 30 14:08:03 alcor kernel: PCI: *Unable to reserve mem region*
> #6:1000@dfefd000 for device 0000:80:08.0
> Aug 30 14:08:03 alcor kernel: ACPI: PCI interrupt for device
> 0000:80:08.0 disabled
> Aug 30 14:08:03 alcor kernel: sata_nv: probe of 0000:80:08.0 failed with
> error -16
> 
> sata_nv that comes with the 2.6.22 kernels appear to be version 3.4
> while the older kernels comes with version 3.2 (which work). I contacted
> Robert Hancock directly about this and he suggested I post an email to
> LKML.
> 
> Motherboard:
> http://www.supermicro.com/Aplus/motherboard/Opteron/nForce/H8DCE.cfm
> Single AMD Opteron(tm) Processor 244
> 1 GB of memory.
> 
> I can send you the complete dmesg output if you would like.
> 

Open a bugzilla at https://bugzilla.redhat.com and post full dmesg from
the new and old kernels as attachments there.


There seems to be some kind of memory layout problem in 2.6.22...
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/