Re: [PATCH 3/3] ppc64: Convert cpu_sibling_map to a per_cpu dataarray

[Mike Travis]

Kamalesh Babulal wrote:
> Kamalesh Babulal wrote:
>> travis@xxxxxxx wrote:
>>> Convert cpu_sibling_map to a per_cpu cpumask_t array for the ppc64
>>> architecture.
>>>
>>> Note: these changes have not been built nor tested.
>>>
>>> Note: I also don't know if these changes are particularly
>>> relevant for the ppc64 architecture.
>>>
>>> Signed-off-by: Mike Travis <travis@xxxxxxx>
>>> ---
>>>  arch/powerpc/kernel/setup-common.c        |    4 ++--
>>>  arch/powerpc/kernel/smp.c                 |    4 ++--
>>>  arch/powerpc/platforms/cell/cbe_cpufreq.c |    2 +-
>>>  include/asm-powerpc/smp.h                 |    3 ++-
>>>  include/asm-powerpc/topology.h            |    2 +-
>>>  5 files changed, 8 insertions(+), 7 deletions(-)
>>>
>>> --- a/arch/powerpc/kernel/setup-common.c
>>> +++ b/arch/powerpc/kernel/setup-common.c
>>> @@ -415,9 +415,9 @@
>>>       * Do the sibling map; assume only two threads per processor.
>>>       */
>>>      for_each_possible_cpu(cpu) {
>>> -        cpu_set(cpu, cpu_sibling_map[cpu]);
>>> +        cpu_set(cpu, cpu_sibling_map(cpu));
>>>          if (cpu_has_feature(CPU_FTR_SMT))
>>> -            cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
>>> +            cpu_set(cpu ^ 0x1, cpu_sibling_map(cpu));
>>>      }
>>>
>>>      vdso_data->processorCount = num_present_cpus();
>>> --- a/arch/powerpc/kernel/smp.c
>>> +++ b/arch/powerpc/kernel/smp.c
>>> @@ -61,11 +61,11 @@
>>>
>>>  cpumask_t cpu_possible_map = CPU_MASK_NONE;
>>>  cpumask_t cpu_online_map = CPU_MASK_NONE;
>>> -cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] =
>>> CPU_MASK_NONE };
>>> +DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
>>>
>>>  EXPORT_SYMBOL(cpu_online_map);
>>>  EXPORT_SYMBOL(cpu_possible_map);
>>> -EXPORT_SYMBOL(cpu_sibling_map);
>>> +EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
>>>
>>>  /* SMP operations for this machine */
>>>  struct smp_ops_t *smp_ops;
>>> --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
>>> +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
>>> @@ -117,7 +117,7 @@
>>>      policy->cur = cbe_freqs[cur_pmode].frequency;
>>>
>>>  #ifdef CONFIG_SMP
>>> -    policy->cpus = cpu_sibling_map[policy->cpu];
>>> +    policy->cpus = cpu_sibling_map(policy->cpu);
>>>  #endif
>>>
>>>      cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
>>> --- a/include/asm-powerpc/smp.h
>>> +++ b/include/asm-powerpc/smp.h
>>> @@ -58,7 +58,8 @@
>>>                      (smp_hw_index[(cpu)] = (phys))
>>>  #endif
>>>
>>> -extern cpumask_t cpu_sibling_map[NR_CPUS];
>>> +DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
>>> +#define cpu_sibling_map(cpu) per_cpu(cpu_sibling_map, cpu)
>>>
>>>  /* Since OpenPIC has only 4 IPIs, we use slightly different message
>>> numbers.
>>>   *
>>> --- a/include/asm-powerpc/topology.h
>>> +++ b/include/asm-powerpc/topology.h
>>> @@ -108,7 +108,7 @@
>>>  #ifdef CONFIG_PPC64
>>>  #include <asm/smp.h>
>>>
>>> -#define topology_thread_siblings(cpu)    (cpu_sibling_map[cpu])
>>> +#define topology_thread_siblings(cpu)    (cpu_sibling_map(cpu))
>>>  #endif
>>>  #endif
>>>
>>>
>>>   
>> Hi Mike,
>>
>> After applying the patch, the build fails with following error
>>
>> CHK include/linux/version.h
>> CHK include/linux/utsrelease.h
>> CC arch/powerpc/kernel/asm-offsets.s
>> In file included from include/linux/smp.h:19,
>> from include/linux/topology.h:33,
>> from include/linux/mmzone.h:660,
>> from include/linux/gfp.h:4,
>> from include/linux/slab.h:14,
>> from include/linux/percpu.h:5,
>> from include/asm/time.h:18,
>> from include/asm/cputime.h:26,
>> from include/linux/sched.h:65,
>> from arch/powerpc/kernel/asm-offsets.c:17:
>> include/asm/smp.h:61: error: expected declaration specifiers or ‘...’
>> before ‘cpu_sibling_map’
>> include/asm/smp.h:61: warning: data definition has no type or storage
>> class
>> include/asm/smp.h:61: warning: type defaults to ‘int’ in declaration
>> of ‘DECLARE_PER_CPU’
>> make[1]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
>> make: *** [prepare0] Error 2
>>
>> Thanks & Regards,
>> Kamalesh Babulal.
> Hi Make,
> 
> I tried to debug and probably the patch below could help the build error
> 
> Signed-off-by: Kamalesh Babulal <kamalesh@xxxxxxxxxxxxxxxxxx>
> ----
> 
> --- a/include/asm-powerpc/smp.h 2007-09-07 18:15:43.000000000 +0530
> +++ b/include/asm-powerpc/smp.h 2007-09-07 18:16:02.000000000 +0530
> @@ -25,6 +25,7 @@
> 
> #ifdef CONFIG_PPC64
> #include <asm/paca.h>
> +#include <asm/percpu.h>
> #endif
> 
> extern int boot_cpuid;
> 
> ---
> Thanks & Regards,
> Kamalesh Babulal.
> 
> 
> 

Thanks!   I'll merge the above in...

Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/