2.6.21 -> 2.6.22 & 2.6.23-rc8 performance regression

From: Denys
Date: Sun Sep 30 2007 - 11:08:39 EST


I've moved recently one of my proxies(squid and some compressing application)
from 2.6.21 to 2.6.22, and notice huge performance drop. I think this is
important, cause it can cause serious regression on some other workloads like
busy web-servers and etc.

After some analysis of different options i can bring more exact numbers:

2.6.21 able to process 500-550 requests/second and 15-20 Mbit/s of traffic,
and working great without any slowdown or instability.

2.6.22 able to process only 250-300 requests and 8-10 Mbit/s of traffic, ssh
and console is "freezing" (there is delay even for typing characters).

Both proxies is on identical hardware(Sun Fire X4100), configuration(small
system, LFS-like, on USB flash), different only kernel.

I tried to disable/enable various options and optimisations - it doesn't
change anything, till i reach SLUB/SLAB option.

I've loaded proxy configuration to gentoo PC with 2.6.22 (then upgraded it to
2.6.23-rc8), and having same effect.
Additionally, when load reaching maximum i can notice whole system slowdown,
for example ssh and scp takes much more time to run, even i do nice -n -5 for
them.

But even choosing 2.6.23-rc8+SLAB i noticed same "freezing" of ssh (and sure
it slowdown other kind of network performance), but much less comparing with
SLUB. On top i am seeing ksoftirqd taking almost 100% (sometimes ksoftirqd/0,
sometimes ksoftirqd/1).

I tried also different tricks with scheduler (/proc/sys/kernel/sched*), but
it's also didn't help.

When it freezes it looks like:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7 root 15 -5 0 0 0 R 64 0.0 2:47.48 ksoftirqd/1
5819 root 20 0 134m 130m 596 R 57 3.3 4:36.78 globax
5911 squid 20 0 1138m 1.1g 2124 R 26 28.9 2:24.87 squid
10 root 15 -5 0 0 0 S 1 0.0 0:01.86 events/1
6130 root 20 0 3960 2416 1592 S 0 0.1 0:08.02 oprofiled


Oprofile results:


Thats oprofile with 2.6.23-rc8 - SLUB

73918 21.5521 check_bytes
38361 11.1848 acpi_pm_read
14077 4.1044 init_object
13632 3.9747 ip_send_reply
8486 2.4742 __slab_alloc
7199 2.0990 nf_iterate
6718 1.9588 page_address
6716 1.9582 tcp_v4_rcv
6425 1.8733 __slab_free
5604 1.6339 on_freelist


Thats oprofile with 2.6.23-rc8 - SLAB

CPU: AMD64 processors, speed 2592.64 MHz (estimated)
Counted CPU_CLK_UNHALTED events (Cycles outside of halt state) with a unit
mask of 0x00 (No unit mask) count 100000
samples % symbol name
138991 14.0627 acpi_pm_read
52401 5.3018 tcp_v4_rcv
48466 4.9037 nf_iterate
38043 3.8491 __slab_alloc
34155 3.4557 ip_send_reply
20963 2.1210 ip_rcv
19475 1.9704 csum_partial
19084 1.9309 kfree
17434 1.7639 ip_output
17278 1.7481 netif_receive_skb
15248 1.5428 nf_hook_slow

My .config is at http://www.nuclearcat.com/.config (there is SPARSEMEM
enabled, it doesn't make any noticeable difference)

Please CC me on reply, i am not in list.

--
Denys Fedoryshchenko
Technical Manager
Virtual ISP S.A.L.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/