[git patch] libata critical fix

From: Jeff Garzik
Date: Fri Oct 12 2007 - 00:25:32 EST



There is a lingering corruption in sata_mv that took me several days to
narrow down... the failure to mask off the lower 16 bits of the S/G
length was leading to corruption, because this stomped on other
important bits in that S/G entry.

This should fix it (stable aka 2.6.23.1 needs this too):

Please pull from 'upstream-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-fixes

to receive the following updates:

drivers/ata/sata_mv.c | 27 ++++++++++++++++++---------
1 files changed, 18 insertions(+), 9 deletions(-)

commit 6c08772e49622e90d39903e7ff0be1a0f463ac86
Author: Jeff Garzik <jeff@xxxxxxxxxx>
Date: Fri Oct 12 00:16:23 2007 -0400

[libata] sata_mv: more S/G fixes

* corruption fix: we only want the lower 16 bits of length (0 == 64kb)

* ditto: the upper layer sets max-phys-segments to LIBATA_MAX_PRD,
so we must reset it to own hw-specific length.

* delete unused mv_fill_sg() return value

Signed-off-by: Jeff Garzik <jgarzik@xxxxxxxxxx>

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cb7dec9..d9832e2 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -69,10 +69,11 @@
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
#include <linux/libata.h>

#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.01"

enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -420,6 +421,7 @@ static void mv_error_handler(struct ata_port *ap);
static void mv_post_int_cmd(struct ata_queued_cmd *qc);
static void mv_eh_freeze(struct ata_port *ap);
static void mv_eh_thaw(struct ata_port *ap);
+static int mv_slave_config(struct scsi_device *sdev);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);

static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -457,7 +459,7 @@ static struct scsi_host_template mv5_sht = {
.use_clustering = 1,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
+ .slave_configure = mv_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
@@ -475,7 +477,7 @@ static struct scsi_host_template mv6_sht = {
.use_clustering = 1,
.proc_name = DRV_NAME,
.dma_boundary = MV_DMA_BOUNDARY,
- .slave_configure = ata_scsi_slave_config,
+ .slave_configure = mv_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
@@ -763,6 +765,17 @@ static void mv_irq_clear(struct ata_port *ap)
{
}

+static int mv_slave_config(struct scsi_device *sdev)
+{
+ int rc = ata_scsi_slave_config(sdev);
+ if (rc)
+ return rc;
+
+ blk_queue_max_phys_segments(sdev->request_queue, MV_MAX_SG_CT / 2);
+
+ return 0; /* scsi layer doesn't check return value, sigh */
+}
+
static void mv_set_edma_ptrs(void __iomem *port_mmio,
struct mv_host_priv *hpriv,
struct mv_port_priv *pp)
@@ -1130,10 +1143,9 @@ static void mv_port_stop(struct ata_port *ap)
* LOCKING:
* Inherited from caller.
*/
-static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
+static void mv_fill_sg(struct ata_queued_cmd *qc)
{
struct mv_port_priv *pp = qc->ap->private_data;
- unsigned int n_sg = 0;
struct scatterlist *sg;
struct mv_sg *mv_sg;

@@ -1151,7 +1163,7 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)

mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
- mv_sg->flags_size = cpu_to_le32(len);
+ mv_sg->flags_size = cpu_to_le32(len & 0xffff);

sg_len -= len;
addr += len;
@@ -1160,12 +1172,9 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc)
mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);

mv_sg++;
- n_sg++;
}

}
-
- return n_sg;
}

static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/