Re: [PATCH 9/16] CRIS architecture: Correct compile errors

[Roel Kluin]

Jesper Nilsson wrote:

>  static int
>  e100_probe_transceiver(struct net_device* dev)
>  {
> +#if !defined(CONFIG_ETRAX_NO_PHY)
>  	unsigned int phyid_high;
>  	unsigned int phyid_low;
>  	unsigned int oui;
>  	struct transceiver_ops* ops = NULL;
> +	struct net_local *np = netdev_priv(dev);
> +
> +	spin_lock(&np->transceiver_lock);
>  
>  	/* Probe MDIO physical address */
> -	for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) {
> -		if (e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR) != 0xffff)
> +	for (np->mii_if.phy_id = 0; np->mii_if.phy_id <= 31; 
> +	     np->mii_if.phy_id++) {
> +		if (e100_get_mdio_reg(dev, 
> +				      np->mii_if.phy_id, MII_BMSR) != 0xffff)
>  			break;
>  	}
> -	if (mdio_phy_addr == 32)
> +	if (np->mii_if.phy_id == 32)
>  		 return -ENODEV;
You need to unlock before this return.
>  
>  	/* Get manufacturer */
> -	phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1);
> -	phyid_low = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID2);
> +	phyid_high = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID1);
> +	phyid_low = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_PHYSID2);
>  	oui = (phyid_high << 6) | (phyid_low >> 10);
>  
>  	for (ops = &transceivers[0]; ops->oui; ops++) {
> @@ -998,6 +912,8 @@
>  	}
>  	transceiver = ops;
>  
> +	spin_unlock(&np->transceiver_lock);
> +#endif
>  	return 0;
>  }
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/