[PATCH] oProfile: support for AMD family10

[Philippe Elie]

From: Barry Kasindorf <barry.kasindorf@xxxxxxx>

oProfile Driver Module Patch for AMD Family10h Kernel 2.6.23
This patch is for controlling the upper 32bits of the event ctrl msrs.
This includes the upper 4 bits of the event select and the Guest Only
and Host Only bits
This patch is necessary to make Event Based Profiling work reliably on a
Family10h processor

Signed-off-by: Barry Kasindorf <barry.kasindorf@xxxxxxx>
Signed-off-by: Robert Richter <robert.richter@xxxxxxx>
Signed-off-by: Philippe Elie <phil.el@xxxxxxxxxx>

---

 arch/x86/oprofile/op_model_athlon.c |   22 ++++++++++++++++------
 1 files changed, 16 insertions(+), 6 deletions(-)

Patch originally sent here: http://marc.info/?l=linux-kernel&m=119247216420600&w=2 but it didn't apply cleanly, this one only change spacing.


diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c
index 3057a19..068541d 100644
--- a/arch/x86/oprofile/op_model_athlon.c
+++ b/arch/x86/oprofile/op_model_athlon.c
@@ -1,6 +1,6 @@
 /**
  * @file op_model_athlon.h
- * athlon / K7 model-specific MSR operations
+ * athlon / K7 / K8 / Family 10h model-specific MSR operations
  *
  * @remark Copyright 2002 OProfile authors
  * @remark Read the file COPYING
@@ -31,12 +31,16 @@
 #define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_CLEAR(x) (x &= (1<<21))
+#define CTRL_CLEAR_LO(x) (x &= (1<<21))
+#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
 #define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
 #define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
+#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
+#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
+#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
 
 static unsigned long reset_value[NUM_COUNTERS];
  
@@ -70,7 +74,8 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs)
 		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
-		CTRL_CLEAR(low);
+		CTRL_CLEAR_LO(low);
+		CTRL_CLEAR_HI(high);
 		CTRL_WRITE(low, high, msrs, i);
 	}
 
@@ -89,12 +94,17 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs)
 			CTR_WRITE(counter_config[i].count, msrs, i);
 
 			CTRL_READ(low, high, msrs, i);
-			CTRL_CLEAR(low);
+			CTRL_CLEAR_LO(low);
+			CTRL_CLEAR_HI(high);
 			CTRL_SET_ENABLE(low);
 			CTRL_SET_USR(low, counter_config[i].user);
 			CTRL_SET_KERN(low, counter_config[i].kernel);
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT(low, counter_config[i].event);
+			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
+			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
+			CTRL_SET_HOST_ONLY(high, 0);
+			CTRL_SET_GUEST_ONLY(high, 0);
+
 			CTRL_WRITE(low, high, msrs, i);
 		} else {
 			reset_value[i] = 0;

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/