Re: snd_hda_intel 2.6.24-rc2 bug: interrupts don't always work on Lenovo X60s

[Takashi Iwai]

At Wed, 14 Nov 2007 08:39:03 -0800,
Roland Dreier wrote:
> 
>  > Roland Dreier wrote:
>  > > > >     [ 2311.759856] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21
>  > > > >     [ 2311.759866] hda_intel: probe_mask set to 0x1 for device 17aa:2010
>  > > > >     [ 2311.759886] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>  > > > >     [ 2312.911309] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x003f000c
> 
>  > Anyway, could you try the patch below?  As far as I see, it's the only
>  > part that may access PINCAP verb for that NID.
> 
> This seems to help in that I don't see the "azx_get_response timeout"
> message on every module load as I do with mainline, but I still see a
> problem with a different cmd after a few load-unload cycles:

What cmd more exactly?  The below is GET_DIGI_CONVERT.  So it must be
related with SPDIF but it must be same as 2.6.23.  Or do you happen to
set CONFIG_SND_HDA_POWER_SAVE=y?

Anyway I think there is no real problem with polling mode.  The driver
switches to it when the response from the hardware gets confused.


Takashi

> [  257.503143] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [  259.215359] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [  259.215372] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [  259.215398] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [  263.418591] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [  265.626093] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [  265.626105] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [  265.626133] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [  320.898290] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [  322.874182] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [  322.874196] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [  322.874228] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [  333.087177] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
> [  334.024358] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
> [  334.024371] hda_intel: probe_mask set to 0x1 for device 17aa:2010
> [  334.024395] PCI: Setting latency timer of device 0000:00:1b.0 to 64
> [  335.422296] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0d00

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/